ENGLISH Digital Video Camcorder SCD530/D590 SCD530T/D590T AF CCD LCD Auto Focus Charge Coupled Device Liquid Crystal Display Owner’s Instruction Book Before operating the unit, please read this instruction book thoroughly, and retain it for future reference.
ENGLISH Notices and Safety Instructions Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. To prevent electric shock, match wide blade of plug to wide slot and fully insert.
ENGLISH Notices and Safety Instructions 9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.
ENGLISH Notices and Safety Instructions 14. LIGHTNING: For added protection of this CAMCORDER during a lightning storm o when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and power-line surges. 15.
ENGLISH Notices and Safety Instructions NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
ENGLISH Contents Notes and Safety Instructions ........................................................................................................................................ 6 Notes regarding the rotation of the LCD screen.......................................................................................................................................................................... 6 Notes regarding moisture condensation.....................................................................
ENGLISH Contents Hints for Stable Image Recording ............................................................................................................................................................................................ Recording with the LCD monitor ....................................................................................................................................................................................... Recording with the Viewfinder ...........................
ENGLISH Contents BLC (Back Light Compensation) ............................................................................................................................................................................................. 64 Fade In and Out ....................................................................................................................................................................................................................... 65 To Start Recording .................
ENGLISH Contents Inserting and Removing the Memory Stick ............................................................................................................................................................................. 87 Inserting the Memory Stick ................................................................................................................................................................................................ 87 Removing the Memory Stick ............................
ENGLISH Notes and Safety Instructions Notes regarding the rotation of the LCD screen Please rotate the LCD screen carefully as illustrated. Over rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1. LCD screen closed. 1 2. Standard recording using the LCD screen. 2 3. Recording when looking at the LCD screen from the top. 3 4. Recording when looking at the LCD screen from the front. 4 90 90 90 5. Recording with the LCD screen closed.
ENGLISH Notes and Safety Instructions Notes regarding COPYRIGHT Television programs, video tapes, DVD titles, films, and other program materials may be copyrighted. Unauthorized copying of copyrighted material may be against the law. Notes regarding moisture condensation 1. A sudden rise in atmospheric temperature may cause condensation to form inside the camcorder. for example: - When you move the camcorder from a cold location to a warm location (e.g. from outside to inside during winter.
ENGLISH Notes and Safety Instructions Notes regarding the battery pack - Make sure that the battery pack is fully charged before starting to record. - To preserve battery power, keep your camcorder turned off when you are not operating it. - If your camcorder is in CAMERA mode, and it is left in STBY mode without being operated for more than 5 minutes with a tape installed, it will automatically turn itself off to protect against unnecessary battery discharge.
ENGLISH Notes and Safety Instructions Note regarding the LENS - Do not film with the camera lens pointing directly at the sun. Direct sunlight can damage the CCD(Charge Coupled Device). Notes regarding viewfinder 1. Do not position the camcorder such that the viewfinder is pointing towards the sun. Direct sunlight can damage the inside of the viewfinder. Be careful when placing the camcorder under sunlight or near a window exposed to sunlight. 2. Do not pick up the camcorder from the viewfinder. 3.
ENGLISH Notes and Safety Instructions Precautions regarding the Lithium battery 1. The camcorder’s built-in lithium battery maintains the clock function and user settings, even if the battery pack or AC adapter is removed. 2. The lithium battery for the camcorder lasts about a week under normal operation from the time of installation. 3. When the lithium battery becomes weak or is dead, the date/time indicator will display “– – –” when you set the DATE/TIME to ON.
ENGLISH Getting to Know Your Camcorder Features • Digital data transfer function with IEEE1394 By incorporating the IEEE 1394 (i.LINK™ : i.LINK is a serial data transfer protocol and interconnectivity system, used to transmit DV data) high speed data transport port, both moving and still images can be transferred to a PC, making it possible to produce or edit various images. • USB interface for digital image data transfer You can transfer still images to a PC using the USB interface without an add-on card.
ENGLISH Getting to Know Your Camcorder Accessories Supplied with camcorder Make sure that the following basic accessories are supplied with your digital video camera. Basic Accessories 1. Lithium Ion Battery pack (AD43-00096A) 2. AC Power Adapter (AD44-00065A) 3. AC cord (AD39-00076A) 4. Multi-AV cable 5. Instruction Book 6. Lithium battery (1EA) (AD43-10130H) 7. Remote Control (AD59-00084A) 8. Remocon Strap (AD72-00044B) 9. Hand Grip 10. Ring Hood (AD63-00374A) 11. Neck Strap (AD97-04978A) 12.
ENGLISH Getting to Know Your Camcorder Front & Left View 5. LCD monitor 1. Lens 3. Remote Sensor 12. Infrared light 7. REC Lamp 9. Earphone Jack 10. Multi-AV Jack 6. Battery Pack 8. Charging Indicator 11. DC Jack 4. Hand grip 2. Lens Cover 1. Lens 8. Charging Indicator 2. Lens Cover 9. Earphone Jack 3. Remote Sensor 10. Multi-AV Jack (see page 72) 4. Hand grip (see page 24) 11. DC Jack (see page 19) 5. LCD monitor 12. Infrared light (see page 69) 6. Battery Pack (see page 20) 7.
ENGLISH Getting to Know Your Camcorder Right & Top View 8. Internal MIC 7. NITE PIX switch 9. Smart Shoe 5. Photo button 2. External MIC in 6. Zoom lever 1. SPEAKER 4. Easy.Q button 3. Custom.Q button 14. Focus Adjustment Knob 10. MEMORY STICK/ TAPE select switch (SCD590/D590T only) 12. DV in/out 13. USB Jack 11. Memory Stick slot (SCD590/D590T only) 1. SPEAKER 9. Smart Shoe (see page 102) 2. External MIC in 3. Custom.Q button (see page 62) 10.
ENGLISH Getting to Know Your Camcorder Rear & Bottom View 8. Power indicator 10. RESET 9. Viewfinder 7. Power switch 1. LCD open 6. START/STOP button 5. Function Buttons 3. MENU selector (MENU SELECT/VOLUME) 2. MENU button 4. Battery Release button 1. LCD open 2. MENU button (see page 34) 3. MENU selector (MENU SELECT/VOLUME) (see page 34) 4. Battery Release button (see page 99) 5. Function Buttons 6. START/STOP button 11. TAPE Eject Switch 7. Power switch (see page 27) 8. Power indicator 9.
ENGLISH Getting to Know Your Camcorder Remote control 12. Zoom TELE (CAMERA mode) / F.ADV( ) (PLAYER mode) 11. Zoom WIDE (CAMERA mode) / F.ADV( ) (PLAYER mode) 10. ZERO MEMORY 1. START/STOP 2. PHOTO 4. 3. (STILL) (REW/RPS) 5. (PLAY) 6. A.DUB 7. (STOP) 1. START/STOP 2. PHOTO 3. (STILL) 4. (REW/RPS) 5. (PLAY) 6. AUDIO DUBBING (see page 66) 7. 16 (STOP) 9. (FF/FPS) 8. SELF TIMER (CAMERA mode) / SLOW (PLAYER mode) CRM-D3E 8. SELF TIMER (CAMERA mode) (see page 70) / SLOW (PLAYER mode) 9.
ENGLISH Getting to Know Your Camcorder OSD (On Screen Display in CAMERA and PLAYER modes) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29.
ENGLISH Getting to Know Your Camcorder OSD (On Screen Display in M.REC/M.PLAY modes) ✤ These items are available on model SCD590/D590T only. OSD in M.REC mode 30.Folder number-file number (see page 88) 31.Image counter - Current still image/Total number of recordable still images. 32.CARD indicator 33.Image recording and loading indicator 34.Quality (see page 89) 35.ERASE PROTECTION indicator (see page 96) 36.Print Mark(see page 95) 37.SLIDE SHOW 34 3332 S.
ENGLISH Preparation Connecting a Power Source There are two types of power source that can be connected to your camcorder. - The AC Power Adapter and AC cord : used for indoor recording. - The Battery Pack : used for outdoor recording. To use the AC Power adapter and DC Cable 1. Connect the AC Power adapter to the AC cord. 4 Power Switch 2. Connect the AC cord to a wall socket. S.S Note ■ The plug and wall socket type may differ according to your resident country. 2 3 1 3.
ENGLISH Preparation Using the Lithium Ion Battery Pack ✤ The amount of continuous recording time available depends on : - The type and capacity of the battery pack you are using. - How often the Zoom function is used. It is recommended that you have several batteries available. 4 Charging the Lithium Ion Battery Pack Blinking time Once per second Twice per second Three times per second Blinking stops and stays on On for a second and off for a second OFF S.S 1. Attach the battery pack to the camcorder.
ENGLISH Preparation Using the Lithium Ion Battery Pack Table of continuous recording time based on model and battery type. ✤ If you close the LCD screen, it switches off and the CVF switches on automatically. ✤ The continuous recording times given in the table above are approximations. Actual recording time depends on usage. Time Continuous recording time Charging time LCD ON CVF ON SB-L70A Approx. 1hr 30min Approx. 1hr Approx. 1hr 30min SB-L110 Approx. 1hr 40min Approx. 1hr 30min Approx.
ENGLISH Preparation Battery level display • The battery level display indicates the amount of power remaining in the battery pack. a. b. c. d. e. Fully charged 20~40% used 40~80% used 80~95% used Completely used (flickers) (The camcorder will turn off soon, change the battery as soon as possible) a b c d e ✤ Please refer to the table on page 21 for approximate continuous recording times. ✤ The recording time is affected by environmental temperature and conditions.
ENGLISH Preparation Inserting and Ejecting a Cassette ✤ When inserting a tape or closing a cassette holder, do not apply excessive force. This may cause a malfunction. ✤ Do not use any tapes other than Mini DV CASSETTES. 1. Connect a power source and slide the TAPE EJECT switch (on the bottom of the camcorder) and open the cassette door. - The cassette holding mechanism rises automatically. 2. Insert a tape into the holder with the tape window facing outward and the protection tab toward the top. 3.
ENGLISH Preparation Adjusting the Hand Grip It is very important to ensure that the Hand Grip has been correctly adjusted before you begin your recording. The hand grip enables you to : - Hold the camcorder in a stable, comfortable position. - Press the Zoom and START/STOP button without having to change the position of your hand. Attaching the Hand Grip 1. Put the camcorder on the Hand Grip. 2. Put the screw in the Hand Grip (Tripod) hole, and fasten the screw.
ENGLISH Preparation Ejecting the tape when the Hand Grip is attached 1. Turn the Grip Cover down. 2. Press the holder lever down to release the holder. 3. Stand the screw lever for the unlocking, and loose the screw a little. 4. Turn the camcorder in the direction of the arrow. 5. Slide the TAPE EJECT switch and open the cassette door. 1 4 2 90 3 180 Using the Neck Strap ✤ For extra security and portability, attach the Neck Strap before using the camcorder.
ENGLISH Preparation How to use the Remote Control Battery Installation for the Remote Control ✤ You need to insert or replace the lithium battery when : - You purchase the camcorder. - The remote control doesn’t work. ✤ Ensure that you insert the lithium cell correctly, following the + and – markings. ✤ Be careful not to reverse the polarity of the battery. Using the Remocon Strap ✤ The Remote comes with a convenient strap.
ENGLISH Basic Recording Making your First Recording 1. Connect a Power source to the camcorder. (see page 19) (A battery pack or a AC power adapter) ■ Insert a cassette. (see page 23) 2 4 3 SAMSUNG 1 2. Remove the LENS CAP and hook it onto the hand grip. FAD S.SH FAD S.SHO 3. Set the power switch to the CAMERA position. ■ Open the LCD monitor and make sure that STBY is displayed. ■ The camcorder power indicator lights up red. ■ The confirmation beep sounds.
ENGLISH Basic Recording When a cassette is loaded and the camcorder is left in the STBY mode for more than 5 minutes without being used, it will switch off automatically. To use it again, push the START/STOP button or set the Power switch to OFF and then back to CAMERA. This Auto Power off feature is designed to save battery power.
ENGLISH Basic Recording Hints for Stable Image Recording ■ ■ While recording, it is very important to hold the camcorder correctly. Fix the LENS cap firmly by clipping it to the hand grip. (refer to the figure) Recording with the LCD monitor 1. Hold the camcorder firmly using the hand grip. 2. Place your right elbow against your side. 3. Place your left hand under or beside the LCD to support and adjust it. Do not touch the built-in microphone. 4.
ENGLISH Basic Recording Adjusting the LCD ✤ Your camcorder is equipped with a 2.5 inch color Liquid Crystal Display(LCD) screen, which enables you to view what you are recording or playing back directly. ✤ Depending on the conditions under which you are using the camcorder (indoors or outdoors for example), you can adjust ; ■ BRIGHT SELECT ■ BRIGHT ADJUST ■ COLOR ADJUST 1. Set the POWER switch to CAMERA position. ■ In the PLAYER mode, you may only setup the LCD while the tape is playing. CAMERA Mode 2.
ENGLISH Basic Recording 8. Push the MENU SELECTOR again. ■ You may select NORMAL, SUPER or BACK LIGHT (SCD530/D590 only) in the BRIGHT SELECT feature and push the MENU SELECTOR to save the setting. - When you use the LCD BACK LIGHT mode in a dark place or indoor, it’s difficult for you to view the image (SCD530/D590 only). ■ Use the MENU SELECTOR to adjust the value of BRIGHT ADJUST and COLOR ADJUST. ■ You can set values for BRIGHT ADJUST between 00 ~ 35 and COLOR ADJUST between 00 ~ 35. 9.
ENGLISH Basic Recording Playing back a tape you have recorded on the LCD ✤ You can monitor the playback picture on the LCD monitor. ✤ Make sure that the battery pack is in place. 1. Hold down the Power switch tab and turn it to the PLAYER position. ■ The Function button indicator light up blue. ■ The confirmation sound beeps. 1 S.SHOW FADE 2. Insert the tape you wish to view. (see page 23) 2 3. Open the LCD screen. Adjust the angle of the LCD screen and set the brightness or color if necessary.
ENGLISH Basic Recording Adjusting the LCD during PLAY ✤ You can adjust the LCD during playback. ✤ The adjustment method is the same procedure as used in CAMERA mode. (see page 30) Controlling Sound from the Speaker The Speaker works in PLAYER mode only. ■ S.SHOW BLC DELETE 3-1 FADE BLC 1. Set the power switch to PLAYER mode. 2. Press (PLAY/STILL) to play the tape. 3. When you hear sounds once the tape is in play, use the MENU SELECTOR to adjust the volume.
ENGLISH Advanced Recording Use of various Functions ● Setting menu items MENU INITIAL CAMERA A/V MEMORY (SCD590/ D590T only) VIEWER SUB MENU CLOCK SET REMOCON REC LAMP BEEP SOUND SHUTTER SOUND DEMONSTRATION PROGRAM AE WHT. BALANCE D. ZOOM EIS DSE SELECT FLASH SELECT CUSTOM.
ENGLISH Advanced Recording ● Availability of functions in each mode Operating Mode Requested Mode EIS NITE PIX O O O O O O O EIS D.ZOOM Digital special D.ZOOM PHOTO effects Digital functions O ✕ PHOTO ✕ ✕ Digital Special Effects O O O NITE PIX O O O O q ✕ O : The requested mode will work in this operating mode. ✕ : You can not change the requested mode. q : The operating mode will be released and the requested mode will work.
ENGLISH Advanced Recording ● CLOCK SET ✤ CLOCK setup works in CAMERA, PLAYER, M.REC and M.PLAY modes. ✤ The DATE/TIME is automatically recorded onto a tape. Before recording, please set the DATE/TIME. 1. Press the MENU button. ■ The menu list will appear. 2. Move the MENU SELECTOR to highlight INITIAL and push the MENU SELECTOR. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET REMOCON REC LAMP BEEP SOUND SHUT.SOUND DEMO 3. Use the MENU SELECTOR to select CLOCK SET from the submenu. 4.
ENGLISH Advanced Recording ● REMOCON ✤ The REMOCON function works in CAMERA, PLAYER, M.REC, M.PLAY modes. ✤ The REMOCON option allows you to enable or disable the remote control for use with the camcorder. 1. Press the MENU button. ■ The menu list will appear. 2. Move the MENU SELECTOR to highlight INITIAL and push the MENU SELECTOR. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET REMOCON REC LAMP BEEP SOUND SHUT.SOUND DEMO 3. Use the MENU SELECTOR to select REMOCON from the submenu. 4.
ENGLISH Advanced Recording ● REC LAMP ✤ The REC LAMP function works in CAMERA mode only. ✤ The REC LAMP lets you know that the camcorder is recording or counting down for the self-timer. ✤ You can turn the REC indicator on or off during recording. 1. Press the MENU button. ■ The menu list will appear. 2. Move the MENU SELECTOR to highlight INITIAL and push the MENU SELECTOR. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET REMOCON REC LAMP BEEP SOUND SHUT.SOUND DEMO 3.
ENGLISH Advanced Recording ● BEEP SOUND ✤ THE BEEP SOUND function works in CAMERA, PLAYER, M.REC, M.PLAY modes. ✤ Use the MENU to setup the BEEP SOUND function. Select whether or not you want to hear a beep sound whenever you change a setup value. 1. Press the MENU button. ■ The menu list will appear. 2. Move the MENU SELECTOR to highlight INITIAL and push the MENU SELECTOR. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET REMOCON REC LAMP BEEP SOUND SHUT.SOUND DEMO 3.
ENGLISH Advanced Recording ● SHUTTER SOUND (SCD590/D590T only) ✤ You can hear SHUTTER SOUND only when the PHOTO function is working. ✤ Determines whether or not you wish to hear a SHUTTER SOUND when using the DSC feature. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to CAMERA mode. M.REC MODE INITIAL CAMERA A/V MEMORY VIEWER CLOCK SET REMOCON REC LAMP BEEP SOUND SHUT.SOUND DEMO 3. Press the MENU button. ■ The menu list will appear. 4.
ENGLISH Advanced Recording ● DEMONSTRATION ✤ Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily. ✤ The DEMONSTRATION function may only be used in the CAMERA mode without a tape inserted in the camcorder. ✤ The demonstration operates repeatedly until the DEMONSTRATION mode switched OFF. 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. ■ The menu list will appear.
ENGLISH Advanced Recording ● PROGRAM AE ✤ The PROGRAM AE function works in CAMERA or M.REC mode only. ✤ The PROGRAM AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions. ✤ They give you creative control over the depth of field. ■ AUTO mode - Auto balance between the subject and the background. - To be used in normal conditions. - The shutter speed automatically varies from 1/60 to 1/250 per second, depending on the scene.
ENGLISH Advanced Recording Setting the PROGRAM AE 1. Press the MENU button. ■ The menu list will appear. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER 2. Move the MENU SELECTOR to highlight CAMERA and push the MENU SELECTOR. PROGRAM AE WHT. BALANCE D.ZOOM EIS DSE SELECT FLASH SELECT CUSTOM 400x 3. Select PROGRAM AE from the submenu. 4. Push the MENU SELECTOR to enter the sub-menu. 5. Using the MENU SELECTOR, select the PROGRAM AE mode. ■ Push the MENU SELECTOR to confirm the PROGRAM AE mode.
ENGLISH Advanced Recording ● WHT. BALANCE (WHITE BALANCE) ✤ The WHITE BALANCE function works in CAMERA or M.REC mode only. ✤ The WHITE BALANCE is a recording function that preserves the unique color of the object in any recording condition. ✤ You may select the appropriate WHITE BALANCE mode to obtain good quality color of the image. ■ AUTO ( ) : This mode is generally used to control the WHITE BALANCE automatically. ■ HOLD ( ) :This fixes the current WHITE BALANCE value.
ENGLISH Advanced Recording Zooming In and Out with DIGITAL ZOOM ✤ Zoom works in CAMERA/M.REC mode only. Zooming In and Out ✤ Zooming is a recording technique that lets you change the size of the subject in a scene. For more professional looking recordings, do not use the zoom function too often. ✤ You can zoom using variable zoom speeds. ✤ Use these features for different shots. Please note that over-use of the zoom feature can lead to unprofessional looking results and a reduction of battery usage time.
ENGLISH Advanced Recording Digital Zoom ✤ More than 10x zoom is achieved digitally. ✤ The picture quality may deteriorate depending on how much you zoom in on the subject. ✤ We recommend that you use the EIS feature with DIGITAL ZOOM for picture stability. (see page 47) 1. Set the camcorder to CAMERA or M.REC mode. 2. Press the MENU button. ■ The menu list will appear. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER PROGRAM AE WHT. BALANCE D.ZOOM EIS DSE SELECT FLASH SELECT CUSTOM 3.
ENGLISH Advanced Recording ● EIS (Electronic Image Stabilizer) ✤ The EIS function works in CAMERA/M.REC mode only. ✤ EIS(Electronic Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the camcorder (within reasonable limits). ✤ It provides more stable pictures when: ■ Recording a small object close-up ■ Recording and walking at the same time ■ Recording through the window of a vehicle CAM MODE 1. Set the camcorder to CAMERA mode. 2. Press the MENU button.
ENGLISH Advanced Recording ● DSE(Digital Special Effects) SELECT ✤ ✤ ✤ ✤ a b. c. d. e. f. g. h. i. 48 The DSE function works in CAMERA and M.REC mode only. The digital effects enable you to give a creative look to your recording by adding various special effects. Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. There are 9 DSE modes. ART mode This mode gives the images a coarse effect.
ENGLISH Advanced Recording Selecting an effect 1. Set the camcorder to CAMERA mode. CAM MODE 2. Press the MENU button. ■ The menu list will appear. 3. Move the MENU SELECTOR to highlight CAMERA and push the MENU SELECTOR. 4. Select DSE SELECT from the submenu. INITIAL CAMERA A/V MEMORY VIEWER PROGRAM AE WHT. BALANCE D.ZOOM EIS DSE SELECT FLASH SELECT CUSTOM 400x CAM MODE CAMERA SET 5. Push the MENU SELECTOR to enter the sub-menu. 6. Using MENU SELECTOR, select the DSE mode.
ENGLISH Advanced Recording ● FLASH SELECT ✤ The FLASH SELECT function works in CAMERA and M.REC mode. ✤ To use the FLASH SELECT function, attach the VL-S1FL Video Light/Flash (optional) to the camcorder’s Smart Shoe and set the VL-S1FL to FLASH mode. 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. ■ The menu list will appear. 3. Move the MENU SELECTOR to highlight CAMERA and push the MENU SELECTOR. 4. Select FLASH SELECT form the submenu and push the MENU SELECTOR.
ENGLISH Advanced Recording ● CUSTOM.Q ✤ You can customize settings and save them for future use. ■ The CUSTOM.Q function operates in the CAMERA and M.REC mode. ✤ If you want to use the CUSTOM.Q function (see page 62) correctly, set the status of each item as desired before using the CUSTOM.Q function. ✤ You can set and store the following items: ■ PROGRAM AE, WHT.BALANCE, D.ZOOM, EIS, DSE SELECT 1. Set the power switch to CAMERA mode. 2. Press the MENU button. ■ The MENU list will appear.
ENGLISH Advanced Recording ● REC MODE ✤ The REC MODE function works in both CAMERA and PLAYER modes. ✤ This camcorder records and plays back in SP (standard play) mode and in LP (long play) mode. ■ SP (standard play): This mode permits 60 minutes of recording time with a DVM60 tape. ■ LP (long play): This mode permits 90 minutes of recording time with a DVM60 tape. 1. Set the camcorder to CAMERA or PLAYER mode. 2. Press the MENU button. ■ The menu list will appear.
ENGLISH Advanced Recording ● LINE IN SELECT ✤ The LINE IN SELECT function works in PLAYER mode. ✤ You can select the input signal (VIDEO or S-VIDEO) when you want to record in PLAYER mode. (see page 77) 1. Set the camcorder to PLAYER mode. 2. Press the MENU button. ■ The menu list will appear. PLAYER MODE INITIAL CAMERA A/V MEMORY VIEWER 3. Move the MENU SELECTOR to highlight A/V and push the MENU SELECTOR. 4. Select LINE IN SELECT from the submenu and push the MENU SELECTOR.
ENGLISH Advanced Recording ● AUDIO MODE ✤ The AUDIO MODE function works in CAMERA and PLAYER modes. ✤ This camcorder can record sound on a tape in two audio modes. ■ 12bit : You can record two 12bit stereo sound tracks. The original stereo sound can be recorded onto the MAIN (SOUND1) track. Additional stereo sound can be dubbed onto the SUB (SOUND2) track. ■ 16bit : You can record one high quality stereo sound using the 16bit recording mode. Audio dubbing is not possible when using this mode. 1.
ENGLISH Advanced Recording ● WIND CUT ✤ The WIND CUT function works in CAMERA and PLAYER modes. ✤ The WIND CUT function minimizes wind noise or other noise while recording. - When the wind cut is on, some low sounds are eliminated along with the sound of the wind. 1. Set the camcorder to CAMERA mode. 2. Press the MENU button. ■ The menu list will appear. CAM MODE INITIAL CAMERA A/V MEMORY VIEWER 3. Move the MENU SELECTOR to highlight A/V and push the MENU SELECTOR. 4. Select WIND CUT from submenu.
ENGLISH Advanced Recording ● DATE/TIME ✤ The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes. ✤ The date and time are automatically recorded on a special data area of the tape. 1. Press the MENU button. ■ The menu list will appear. 2. Move the MENU SELECTOR to highlight VIEWER and push the MENU SELECTOR. 3. Move the MENU SELECTOR to highlight DATE/TIME. 4. Push the MENU SELECTOR to select the sub-menu. 5. Using the MENU SELECTOR, select the DATE/TIME mode.
ENGLISH Advanced Recording DISPLAY ✤ The DISPLAY function works in CAMERA, PLAYER, M.REC, M.PLAY modes. ✤ You can select the output path of the OSD (On Screen Display). ■ OFF: The OSD appears in the LCD screen, CVF only. - In CAMERA mode: The STBY, REC, EASY.Q and CUSTOM.Q appear even when the DISPLAY is turned OFF. The Function input is displayed for 3 seconds then turned off. - In PLAYER mode: When you press any function button, the function is displayed on the OSD for 3 seconds before it turns off.
ENGLISH Advanced Recording Using Quick Menu ✤ Quick menu is available in CAMERA and M.REC mode. ✤ Quick menu is used to adjust camera functions by simply using the MENU SELECTOR button. This feature is useful for when you want to make simple adjustments without having to access the menus and submenus. ■ DATE/TIME - Each time you select DATE/TIME and press the MENU SELECTOR, it will be displayed in the order of DATE - TIME - DATE/TIME - OFF(See page 56).
ENGLISH Advanced Recording ■ FOCUS (see page 63) - Each time you select FOCUS and press the MENU SELECTOR, it will be displayed in the order of M.FOCUS( )-AUTO( ). ■ SHUTTER SPEED & EXPOSURE - You can set values for SHUTTER SPEED and EXPOSURE by selecting ( For more information, see the next chapter. ) icon and pressing the MENU SELECTOR. Setting the Quick menu 1. Set the camcorder to CAMERA mode. 2. Move the MENU SELECTOR. ■ If you move the MENU SELECTOR up, you’ll see FOCUS icon first. CAMERA Mode 3.
ENGLISH Advanced Recording SHUTTER SPEED & EXPOSURE ✤ You can set SHUTTER SPEED and EXPOSURE in CAMERA/M.REC mode. ✤ SHUTTER SPEED and EXPOSURE values can only be set in the Quick Menu. ✤ SHUTTER SPEED and EXPOSURE are automatically switched and/or deactivated. 1. Set the power switch to CAMERA mode. 2. Move the MENU SELECTOR until you see icon on, and then press the MENU SELECTOR. ■ You see a screen on which you can select SHUTTER SPEED and EXPOSURE.
ENGLISH Advanced Recording EASY Mode (for Beginners) ✤ The EASY mode allows a beginner to make good recordings easily. ■ The EASY mode operates in CAMERA and M.REC mode. 1. Set the power switch to CAMERA mode. MIC 2. By pressing the EASY.Q button, all functions on the camera will be set to off and the recording settings will be set to the following basic modes: ■ Battery level, recording mode, counter, DATE/TIME, and EIS ( ) will be displayed. ■ The word “EASY.Q” will appear on the LCD at the same time.
ENGLISH Advanced Recording CUSTOM Mode ✤ You can customize settings and save them for future use. ■ The CUSTOM SET function operates in CAMERA and M.REC mode only. ✤ Please set the custom settings before using this function. (see page 51) MIC 1. Set the power switch to CAMERA mode. M CUSTO EASY 2. To activate the CUSTOM function, press the CUSTOM.Q button. ■ “CUSTOM.Q” will be displayed on the screen. STBY 3. Press START/STOP to start recording. ■ Recording will begin using the CUSTOM settings. 4.
ENGLISH Advanced Recording MF/AF (Manual Focus/Auto Focus) ✤ The MF/AF function works in CAMERA and M.REC mode. ✤ In most situations, it is better to use the automatic focus feature, as it enables you to concentrate on the creative side of your recording. ✤ Manual focusing may be necessary under certain conditions that make automatic focusing difficult and/or unreliable. a b c d Auto Focusing ✤ If you are inexperienced in the use of camcorders, we recommend that you make use of Auto Focus.
ENGLISH Advanced Recording BLC (Back Light Compensation) ✤ BLC works in CAMERA/M.REC mode. ✤ Back lighting exists when the subject is darker than the background: ■ The subject is in front of a window. ■ The person to be recorded is wearing white or shiny clothes and is placed against a bright background; the person’s face is too dark to distinguish his/her features. ■ The subject is outdoors and the background is overcast. ■ The light sources are too bright. ■ The subject is against a snowy background.
ENGLISH Advanced Recording Fade In and Out FADE S.SHOW BLC DELET ✤ The FADE function works in CAMERA mode only. ✤ You can give your recordings a professional look by using special effects such as fading in at the beginning of a sequence or fading out at the end of a sequence. ➔ To Start Recording S.SHOW BLC DELET To Stop Recording (use FADE IN / FADE OUT) ➔ FADE 1. Before recording, hold down the FADE button. The picture and sound gradually disappear (fade out). 2.
ENGLISH Advanced Recording Audio dubbing ✤ ✤ ✤ ✤ The AUDIO DUBBING function only works in PLAYER Mode. You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound. Use the internal and external microphones or other audio equipment. The original sound will not be erased. Dubbing Sound FADE S.SHOW BLC DELETE 1. Set the camcorder to PLAYER mode. ■ If you want to use an external microphone, connect the microphone to the external MIC input jack on the camcorder.
ENGLISH Advanced Recording Dubbed audio Playback 1. Insert the dubbed tape and press MENU button. 2. Move the MENU SELECTOR to highlight A/V. PLAYER MODE 3. Push the MENU SELECTOR to enter the sub-menu. A / V SET REC MODE LINE IN SELECT PHOTO SEARCH PHOTO COPY AUDIO MODE AUDIO SELECT WIND CUT 4. Use the MENU SELECTOR to select AUDIO SELECT from the submenu. VIDEO 12 SOUND1 5. Push the MENU SELECTOR to enter the sub-menu. 6. Using the MENU SELECTOR, select the AUDIO playback channel.
ENGLISH Advanced Recording PHOTO Image Recording 1. Press the PHOTO button and hold it. ■ The still picture appears on the LCD monitor. ■ If you do not wish to record, release the button and wait for more than 2 seconds. 2. Press the PHOTO button once again within 2 seconds after releasing the button. ■ The still picture will be recorded for about 6~7 seconds. 3. After the PHOTO has been recorded, the camcorder returns to STBY mode.
ENGLISH Advanced Recording NITE PIX ✤ The NITE PIX function works in CAMERA or M.REC mode. ✤ The NITE PIX function enables you to record a subject in a dark place. ON OFF NITE PIX 1. Set the power switch to CAMERA mode. 2. Slide the NITE PIX switch to ON. ■ “ ” and “NITE PIX” will be displayed on the screen, - The “NITE PIX” is displayed on the screen for about 3 seconds each time you turn the NITE PIX mode ON. 3. To cancel the NITE PIX function, slide the NITE PIX switch to OFF.
ENGLISH Advanced Recording Setting the Self-Timer Self Record using the Remote Control When you use the Self Timer function on the remote control, the recording begins automatically in 10 seconds. 1. Set the camcorder to CAMERA mode. 2. Press the SELF TIMER button until the appropriate indicator is displayed in the viewfinder. CRM-D3E 3. Press the START/STOP button to start the timer. - Self-Timer starts counting down from 10 with a beep sound.
ENGLISH Advanced Recording Various Recording Techniques ✤ In some situations different recording techniques may be required for more dramatic results. Note Please rotate the LCD screen carefully as excessive rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder. 1. General recording. 1 2 3 4 2. Downward recording. Making a recording with a top view of the LCD screen. 3. Upward recording. Making a recording viewing the LCD screen from below. 4.
ENGLISH Playing back a Tape Tape Playback ✤ The playback function works in PLAYER mode only. Video inputYellow TV Playback on the LCD Audio input (left)-White Audio input (right)-Red S-VIDEO input Camcorder ✤ It is practical to view a tape using the LCD in a car or outdoors. A/V OUT Playback on a TV monitor ✤ To play back a tape, the television must have a compatible color system. ✤ We recommend that you use the AC Power Adapter as the power source for the camcorder.
ENGLISH Playing back a Tape Connecting to a VCR ✤ You can connect your camcorder to a TV which has no Audio and Video input jacks through a VCR. 1. Connect the camcorder and VCR with the Multi-AV cable. ■ The yellow plug : Video ■ The white plug : Audio(L) ■ The red plug : Audio(R) - STEREO only 2. Connect a TV to the VCR. 3. Set the power switch on the camcorder to PLAYER mode. 4. Turn on both the TV and VCR. ■ Set the input selector on the VCR to LINE.
ENGLISH Playing back a Tape Various Functions while in PLAYER mode ✤ The PLAY/STILL, STOP, FF, REW buttons are located on the camcorder and the Remote Control. ✤ The F.ADV(Frame advance), SLOW buttons are located on the Remote Control only. ✤ To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in STILL or SLOW modes for more than 5 minutes. Playback pause ✤ Press the (PLAY/STILL) button during Playback or Slow playback.
ENGLISH Playing back a Tape Frame advance (To play back frame by frame) ✤ Press the F.ADV button on the Remote control while in Still mode. The F.ADV function works in still mode only. ✤ To resume normal playback, press the (PLAY/STILL) button. ✤ Forward frame advance ■ Press the (F.ADV) button on the remote control in still mode. ✤ Reverse frame advance ■ Press the (F.ADV) button on the remote control in still mode. F.
ENGLISH Playing back a Tape ZERO MEMORY ✤ The MEMORY function works in both CAMERA and PLAYER modes. ✤ You can mark a point on a tape that you want to return to following playback. 1. Press the ZERO MEMORY button on the Remote Control during playback or recording at the point you wish to return to. ■ The time code is changed to a tape counter that is set to zero memory with the M 0:00:00(Zero memory indicator) ■ If you want to cancel the zero memory function, press the ZERO MEMORY button again. 2.
ENGLISH Recording in PLAYER mode Recording in PLAYER mode ✤ You can use this camcorder as a recorder. ✤ You can record a tape from VCR or TV, if the TV or other device has audio/video outputs. VIDEO AUDIO(L) AUDIO(R) VCR S-VIDEO 1. Connect the camcorder and VCR or TV with the Multi-AV cable. AV S TV 2. Set the power switch of camcorder to PLAYER mode. CAMCORDER ANTENNA Signal flow 3. Turn on the VCR or TV. 4. Insert a blank tape with protection tab closed into the camcorder.
ENGLISH IEEE 1394 Data Transfer Transferring IEEE1394 (i.LINK)-DV standard data connections Connecting to a DV device ✤ Connecting with other DV standard products. ■ A standard DV connection is quite simple. If a product has a DV port, you can transfer data by connecting to the DV port using the correct cable. !!! Please be careful since there are two types of DV ports, (4pin, 6pin). This camcorder has a 4pin terminal.
ENGLISH IEEE 1394 Data Transfer ● System requirements ■ ■ ■ ■ CPU : faster Intel® Pentium III™ 450Mhz compatible. Operating system : Windows® 98SE, ME, Mac OS Main memory : more than 64 MB RAM IEEE1394 add-on card or built in IEEE1394 card Recording with a DV connection cable 1. Set the power switch to PLAYER mode. 2. Connect the DV cable (not supplied) from the DV IN/OUT port of the camcorder to the DV IN/OUT port of the other DV device. ■ Make sure that DV appears on the screen. 3.
ENGLISH USB interface ● Transferring a Digital Image through a USB Connection ✤ You can easily transfer a still image from a camera, tape, memory to a PC without additional add-on cards via a USB connection. ✤ You can transfer an image to a PC via a USB connection. ✤ If you transfer data to a PC, you need to install the software (Driver, Editing software) supplied with the camcorder.
ENGLISH USB interface (SCD530/D530T only) Installing DVC Media 3.0 Program ✤ Do not connect the camcorder to PC before installing the program. ✤ If another camera or scanner is connected, please disconnect it in advance. ✤ This explanation is based on Windows® 98SE OS. How to install the program 1. The install program automatically operates when the CD is inserted into CD-ROM drive. Note ■ If the install program does not operate, please double click Install.exe in CD-ROM Drive. 2.
ENGLISH USB interface (SCD530/D530T only) 4. The window below displays the folder to install the program. ■ The program is installed in the following folder. C:\Programfiles\Samsung\DVC Media 3.0 ■ Click 4. to change the folder. 5. Connect the camcorder to PC. 6. 6. PC finds new hardware and installs a driver automatically. 7. If the driver is installed, the installation is complete. 8. Execute DVC Media 3.0 player on the Windows wall paper. Note ■ 82 DVC Media 3.
ENGLISH USB interface (SCD590/D590T only) Installing DVC Media 4.0 Program ✤ Do not connect the camcorder to PC before installing the program. ✤ If another camera or scanner is connected, please disconnect it in advance. ✤ This explanation is based on Windows® 98SE OS. Program installation 1. Insert the software CD into CD-ROM drive. - Installation selection screen appears in the monitor. 1. 2.
ENGLISH USB interface (SCD590/D590T only) Install the USB Software (DVC media 4.0™) 4. Repeat steps 1~3. 7. 5. When you see the Start window, click “DVC media 4.0™” to continue installation. 6. Select a language and click “OK”. 7. When the dialogue box appears, click the “NEXT” button. 8. 8. Choose the Destination Folder: ■ To install to default folder, click “NEXT” ■ To install to different folder, click “ Browse” and select another folder. 9. Click the “NEXT” button. 10.
ENGLISH USB interface Connecting to a PC 1. Connect a USB cable to the USB port on the PC. 2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack) 3. Connect the audio cable to the Line input jack of the PC. If the PC has no Line input jack, connect the audio cable to the MIC input jack. There is a possibility you’ll here some audio noise if you use the MIC jack.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Memory Stick ✤ The Memory Stick stores and manages still images recorded by the camera.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Inserting and removing the Memory Stick ● Inserting Memory Stick 1. Turn the Power switch to OFF. 2. Insert the Memory Stick into the Memory Stick slot located on the camcorder, in the direction of the arrow. ● Removing the Memory Stick 1. Turn the Power switch to OFF. 2. Remove the Memory Stick by pushing the card in and letting it spring out. ✤ Do not attempt to pull the Memory Stick out without first pushing it in.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Structure of folders and files on the Memory Stick ✤ The still images that you recorded are saved in JPEG file format on the Memory Stick. ✤ Each file has a file number and all files are assigned to a folder. ■ A file number from DCAM0001 to DCAM9999 is sequentially assigned to each recorded image. ■ Each folder is numbered from 100SSDVC to 999SSDVC and recorded on the Memory Stick. Image Format DCIM 100 SSDVC DCAM 0001 DCAM 0002 .. ..
ENGLISH Digital Still Camera mode (SCD590/D590T only) Selecting the image quality ✤ You can select the quality of a still image to be recorded. Select the image quality 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to the CAMERA mode. 3. Press the MENU button. ■ The menu list will appear. 4. Move the MENU SELECTOR to highlight MEMORY. 5. Push the MENU SELECTOR to enter the sub-menu. 6. Move the MENU SELECTOR to highlight QUALITY in the submenu. 7. Push the MENU SELECTOR. 8.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Recording Still images to a Memory Stick in M.REC Mode. ✤ You cannot record moving pictures onto a Memory Stick. ✤ Audio cannot be recorded onto the Memory Stick. M.REC Mode Recording images to a Memory Stick. 1. Set the mode switch to MEMORY STICK. 3. Press the PHOTO button. ■ If you do not wish to record, after releasing the pressure from the button, wait more than 2 seconds until the still picture releases. S.SHOW FADE 2.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Recording an image from a cassette as a still image. ✤ You can record still image from a cassette onto a Memory Stick. ✤ If you want to recorded multiple still images from a cassette to a Memory Stick, use the COPY function. 1. Set the mode switch to TAPE. 2. Set the power switch to PLAYER mode. 3. Play back the cassette. 4. Press the PHOTO button when the image you want to record appears. ■ The tape is set to play back pause (STILL) mode.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Viewing Still images ✤ You can playback and view still images recorded on the Memory Stick. ✤ There are 3 ways to view recorded images. ■ Single : To view an image frame by frame. ■ Slide show : To view all images automatically and in consecutive order. ■ Multi screen: To view 6 images at once. To view a Single image S.SHOW DELETE REV BATT.RELEASE FWD MENU SEARCH 92 BLC To view a slide show 1. Set the mode switch to MEMORY STICK. 2.
ENGLISH Digital Still Camera mode (SCD590/D590T only) To view the Multi Screen 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER. ■ The last recorded image appears. 3. Press the PHOTO button to view 6 images on a single screen. ■ A selection mark ( ) appears under the image. ■ Move the MENU SELECTOR downwards to go the previous image and upwards to go to the next image. ■ Jump to the next/previous multi screen with the (FWD) or (REV) buttons.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Copying still images from a cassette to Memory Stick ✤ You can copy still images with PHOTO function on a cassette onto a Memory Stick. 1. Set the power switch to the PLAYER mode. PLAYER MODE 2. Press the MENU button. 3. Move the MENU SELECTOR to highlight A/V and push the MENU SELECTOR. ■ The submenu will appear. 4. Move the MENU SELECTOR to highlight PHOTO COPY and push the MENU SELECTOR.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Marking images for printing ✤ This camcorder supports the DPOF (Digital Print Order Format) print format. ✤ You can automatically print images recorded on a Memory Stick with a printer supporting DPOF. ✤ There are 2 ways to make a PRINT MARK. ■ THIS FILE : You can set a print mark on the photo image displayed on the LCD. ■ ALL FILES : To print 1 copy each of all of the stored images. 1. Set the mode switch to MEMORY STICK. 2.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Protection from accidental erasure ✤ You can protect important images from accidental erasure. ■ If you execute FORMAT, all images including protected images will be erased. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER mode. ■ The last recorded image appears. ■ If there are no recorded images on the Memory Stick, NO STORED IMAGE! and 3. Using the (FWD) and will display on the screen.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Deleting Still images ✤ You can erase the still images recorded on the Memory Stick. ✤ If you want to delete protected images, you must first deactivate the image protection. ✤ An image which has been deleted cannot be recovered. 1. Set the mode switch to MEMORY STICK. 2. Set the power switch to PLAYER mode 3. Using the (FWD) and (REV) buttons, search for the still image that you want to delete. 4. Press the MENU button. 5.
ENGLISH Digital Still Camera mode (SCD590/D590T only) Formatting the Memory Stick ✤ You can use the MEMORY FORMAT functions to completely delete all images and options on the Memory Stick , including protected images. ✤ The format function restores the Memory Stick to its initial states. ✤ The Memory Stick supplied with this camcorder has been formatted already. Attention ✤ If you execute the MEMORY FORMAT function, all images will be erased completely and erased images cannot be recovered. 1.
ENGLISH Maintenance After finishing a recording ✤ At the end of a recording you must remove the power source. ✤ When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed from the camcorder. After completing a recording session 1. Slide the TAPE EJECT switch in the direction of the arrow. ■ Opening the cassette door ejects the tape automatically. ■ Please wait while the tape is completely ejected. 2.
ENGLISH Maintenance Cleaning and Maintaining the Camcorder Cleaning the VIEWFINDER 1. Pull the VIEWFINDER out. 2. As shown in the illustration, press the fix button located on the left side of the camcorder section adjacent to the VIEWFINDER with a sharp object and pull the VIEWFINDER out. 3. Clean the VIEWFINDER lens and the lens on the camcorder with a soft cotton swab. 4. Once the cleaning is completed, place the VIEWFINDER back on to the camcorder.
ENGLISH Maintenance Using Your Camcorder Abroad ✤ Each country or region has its own electric and color systems. ✤ Before using your camcorder abroad, check the following items. Power sources ■ ■ You can use your camcorder in any country or area with the supplied AC Power Adapter within 100V to 240V, 50/60 Hz. Use a commercially available AC plug Adapter, if necessary, depending on the design of the local wall outlet. Color system ■ You can view your recording in the viewfinder.
ENGLISH Smart Shoe Using the Smart Shoe ✤ ✤ ✤ ✤ You can use to attach an optional accessory to the camcorder’s Smart Shoe. The accessory is powered by the camcorder’s power supply. Turn the camcorder’s power off before attaching/removing the accessory to the Smart Shoe. Types of optional accessories for Smart Shoe. ■ VL-S1IR Video/IR Light ■ VL-S1FL Video Light/Flash ■ ZM-EC1 Gun Zoom Mic ex) Using the VL-S1FL Video Light/Flash(optional) 1.
ENGLISH Smart Shoe VL-S1IR Video/IR Light Attach the Video Light/IR Light to the camcorder when recording in dark rooms or places. When on its automatic setting, the Video Light turns ON/OFF automatically according to the brightness level of recording conditions. When using the IR Light, set the camcorder’s NITE PIX switch to ON. VL-S1FL Video Light/Flash Attach the Video Light/Flash to a camcorder when recording in dark places.
ENGLISH Troubleshooting Troubleshooting ✤ Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Self Diagnosis Display Display Blinking Informs that... Action slow the battery pack is almost discharged. Change to a charged one. TAPE END! slow When the remaining time on the tape is about 2 minutes. Prepare a new one. TAPE END! no the tape reached its end. Change to a new one.
ENGLISH Troubleshooting Self Diagnosis Display in M.REC/M.PLAY mode (SCD590/D590T only) Display Blinking Informs that... Action MEMORY STICK! slow There no Memory Stick in the Insert a Memory Stick. camcorder. MEMORY FULL! slow There is not enough memory to record. Change to a new Memory Stick or erase recorded image. NO STORED IMAGE! slow There are no images recorded on the Memory Stick. Record new images. WRITE PROTECT! slow The Memory Stick is record protected.
ENGLISH Troubleshooting ✤ If these instructions do not solve your problem, contact your nearest Samsung authorized service center. Symptom 106 Explanation/Solution You cannot switch the camcorder on Check the battery pack or the AC Power Adapter. START/STOP button does not operate while recording Check the POWER switch is set to CAMERA. You have reached the end of the cassette. Check the record protection tab on the cassette. The camcorder goes off automatically.
ENGLISH Specifications Model name: SCD530/D530T/D590/D590T System Video signal Video recording system Audio recording system Usable cassette Tape speed Tape recording time FF/REW time Image device Lens Filter diameter LCD monitor/Viewfinder Size/dot number LCD monitor Method Viewfinder Connectors Video output S-video output Audio output DV input/output USB output External mic General Power source Power source type Power consumption (Recording) Operating temperature Storage temperature External dimension We
ENGLISH INDEX -AAccessories ........................................................................................ 12 Audio dubbing .................................................................................... 66 AUDIO MODE .................................................................................... 54 -BBattery Pack ....................................................................................... 20 BEEP Sound .........................................................................
ENGLISH Warranty SAMSUNG LIMITED WARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at it’s option. All warranty repairs must be performed by a SEA authorized service center.
ENGLISH THIS CAMCORDER IS MANUFACTURED BY: ELECTRONICS SERVICE DIVISION 400 Valley Road, Suite 201, Mt. Arlington N.J. 07856 Tel: 1-800-SAMSUNG (1-800-726-7864) *Samsung Electronics’ Internet Home Page http://www.samsungusa.