SCC-B9270 operating instructions RUS POL TUR CZE 1-SCC_B9270_EEU-ENG.indd 1 ENG DAY&NIGHT IR LED CAMERA imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
safety precautions CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
CAUTION 1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. Do not install in a location subject to high temperature (over 50˚C), low temperature (below -10˚C), or high humidity. Doing so may cause fire or electric shock. 3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it. 4.
important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
contents 02 Features THINGS TO KEEP IN MIND DURING INSTALLATION AND USE 02 Things to keep in mind during installation and use 03 Dimensions & cable connection INSTALLATION 03 Installation TROUBLESHOOTING 04 Troubleshooting SPECIFICATIONS 05 Specifications 02 ENG FEATURES 02 DIMENSIONS & CABLE CONNECTION 03 03 1-SCC_B9270_EU-ENG.
features • • • • • • • ONY Super HAD High/Standard Resolution Color CCD S Resolution: 350 TVL CDS Auto Switching IR-LED control (48pcs IR-LED) 0 Lux at IR LED ON 4.3mm DC Fixed IRIS F2.0 Day&Night Lens DC12V Power Source Waterproof Outdoor Installation (IP-66) things to keep in mind during installation and use Do not disassemble the camera on your own. Always be careful when handling the camera. Do not strike the camera by your fists or shake it.
dimensions & cable connection 77 125 70 ENG 104 82 VIDEO POWER installation First : There are three mounting holes on the bracket so that users can install the unit in any place such as on the ceiling and wall. • Second : Fix the camera on the bracket. • Third : Connect the video & power cable to camera. Please check the points below before connection. • Power supply - Adaptor : D C12V/800mA Regulated Power Supply - To avoid fire or shock hazard, use a UL listed power supply.
Monitor Impedance - Set the impedance switch to 75 standard position. - W hen monitor is set to high impedance mode, the picture may become blurred. In this case, check the switch position of monitor impedance. • Fourth : Turn the camera direction to the picture that you want to display. To avoid smear, do not expose the camera directly to a strong light source such as the sun or spot light.
specifications PAL Image Sensor 1/3" Interline transfer type Color CCD (SONY) Effective Pixels 500H x 582V (290K pixels) Scanning System 625 Lines 2:1 Interlace Scanning Frequency 15.625KHz (H), 50Hz (V) Resolution 350TVL Shutter Speed 1/50~1/100,000 sec. S/N Ratio More than 48dB (AGC Off) Sync. System Internal Min. Illumination 0 Lux (IR LED On) White Balance AWC Video Output VBS 1.0 Vp-p (75 Load) Lens 4.3mm DC Fixed IRIS F2.
1-SCC_B9270_EU-ENG.indd 6 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.