Digital Color Dome Camera User’s Guide ENG SCC-B535x(S) FRE SPA JAP AB68-00648C(01)Eng.
EXPLANATION OF SAFETY RELATED SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within Triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
8. CAUTION 1. 2. 3. 4. 5. 6. B68-00648C(01)Eng.indd 3 Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference. Do not install in a location subject to high temperature (over 122°F, 50°C), low temperature (below 14°F, -10°C), or high humidity. Doing so may cause fire or electric shock. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be followed.
B68-00648C(01)Eng.indd 5 connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
17) Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
Contents About this guide ............................................................................8 Product overview...........................................................................8 Main features .................................................................................8 Components...................................................................................8 Checking components in the package .......................................8 Components of your camera ....................
Overview ❚ About this guide This user guide includes basic instructions for the product. It is recommended that all users read this guide before use. This guide is divided as follows: Chapter 1, “Overview,” introduces the user guide and product related information. (This chapter) Chapter 2, “Installation,” explains how to set and install the product. Appendix, “Specifications,” provides the specifications of the product.
Components of your camera Your camera has the following components: 2 1 3 4 5 @ 7 8 9 0 ! # $ B68-00648C(01)Eng.indd 9 Video connector Power connector ENG 6 Lens 1. Cover dome: Covers the inner cover, lens, and main body to protect them. 2. Inner cover: Covers the main body to protect it. 3. Wing locker: Push a long thin screwdriver into its narrow spot and press it outward when you want to remove the inner cover. 4. Main body: Includes a lens, a switch board, a PCB board, screws, and such. 5.
Installation ❚ Setting switches Setting function switches To set the available functions on your camera, adjust eight switches as shown below: DEC 8 7 6 5 4 3 2 1 INC No 1 2 3 4 5 6 Name LL LSS H-REV V-REV BLC FL 7 D/N 8 AWB Brief description Line lock ON/OFF Sens-up or Low speed shutter ON/OFF Horizontal reverse ON/OFF Vertical reverse ON/OFF Backlight compensation ON/OFF Flickerless ON/OFF Automatic switching between color and black & white ON/OFF Automatic white balance ON/OFF 1.
ENG 2. Switch 2 (LSS): This sens-up mode accumulates the image fields in memory to reduce noise but increase the brightness and contrast rate. When this switch is set to ON, the camera automatically switches to a maximum of 128 times of image acquisition speed to implement a clear picture for darker image. 3. Switch 3 (H-REV): When this switch is set to ON, the camera image is reversed horizontally. If you want to monitor your site using a mirror, you can use this feature to see the right image. 4.
❚ Connecting cables and changing the settings Before installing your camera, you have to adjust the lens focus, zoom, and switch settings. To connect cables Monitor BNC Cable 1. Connect the BNC cable to the Video connector attached on your camera. 2. Connect the BNC cable to the Video Input on a monitor. 3. Connect the power adapter to the Power connector attached on your camera. When the monitor is turned on, the camera image appears. To adjust the lens focus, zoom, and function settings 1.
❚ Installing camera Before installation Before installing your camera, you have to read the following cautions: You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire. When installing your camera, don’t allow any person to approach the installation site. If you have any valuable things under the place, move them away.
5. When you install the Mount bracket on the ceiling, remove the Ceiling mount opener by pressing it hard to connect the line attached on your camera through the hole in the ceiling. Otherwise, you can use the empty space opposite to the CAMERA FRONT sign for line connection. 6. Now attach the Main body to the Mount bracket by rotating it in the LOCK direction after aligning the Groove mark on the Main body with the wide groove around the CAMERA FRONT inlay. 7. Adjust the camera direction.
Appendix A: Specifications for NTSC Standard Item Product type Power input Broadcast type Power consumption Image device PAN function Range: 0 to 355° (100 degree clockwise and 255 degree counterclockwise) TILT function Range: 0 to 90° Line Lock (LL) Sens-Up; Low Speed Shutter(LSS) Horizontal Reverse (H-REV) Vertical Reverse (V-REV) Backlight compensation (BLC) Flickerless (FL) Switching between color and B&W modes (D/N) Auto white balancing (AWB) Digital noise reduction (DNR) Dynamic CCD defect compensa
Appendix B: Specifications for PAL Standard Item Product type Power input Broadcast type Power consumption Image device Signal output Lens Details CCTV color dome camera AC 24V ± 10% (50Hz ± 0.3 Hz), DC 12V +10%/-5% PAL Standard System (625 Lines, 50 Fields) Approx. 1.7W 1/3 inch IT Type Super-HAD CCD Total: 795(H) x 596(V), 470,000 pixels Effective: 752(H) x 582(V), 440,000 pixels 625 Lines, 2:1 Interlace Horizontal: 15.625Hz(INT)/15.
B68-00648C(01)Eng.
B68-00648C(01)Eng.
