SCC-B2335(P) SCC-B2035P DIGITAL COLOR CAMERA user manual ENG FRE GER SPA ITA imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsungsecurity.
Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.. 10.W e CAUT 1. D s 2. D 1 This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. 3. If o This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Safety information 10.When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock. CAUTION 1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference. 2. Do not install in a location subject to high temperature (over 50°C), low temperature (below 10°C), or high humidity. Doing so may cause fire or electric shock. d of nce nce 4.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. 9.
es wide sult Introduction Features PRODUCT & ACCESSORIES Part Names and Functions 6 7 8 Installation Connecting the Auto Iris Lens Connector Mounting the lens Connecting cables and checking operation 11 11 12 How to use OSD Menu Using Icons in the Menu Main Menu Profile Camera Setup Intelligence Privacy zone Setup Other Set Communication System Information Language 13 13 14 16 23 25 26 26 27 27 Specifications Specifications 28 English – 5 ENG have y, or Contents
Introduction FEATURES ❖ High Resolution • This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. ❖ VPS(Virtual Progressive Scan) • This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality recording and file transfer via the Internet. PRO ❖P • ❖ Intelligent Motion Detection & Tracking • This is an intelligent function that automatically detects a motion of an object.
Introduction PRODUCT & ACCESSORIES and ❖ Product & Accessories • Main Product h t ting ure ENG Camera e.
Introduction ❖R PART NAMES AND FUNCTIONS ❖ Side View Mount Adapter Fixing Grooves Auto Iris Lens Connector Camera Lens Auto Iris Lens Control Cable • Auto Iris Lens Connector This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. • Auto Iris Lens Control Cable This cable transmits the power and signals from the camera for controlling the Auto Iris Lens.
Introduction ❖ Rear Panel n o p q r alled.
Introduction n Input/Output Connector This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm output signals. No. Function 1 ALARM OUT 2 GND 3 TRIGGER IN 4 SHUTTER (S0) 5 SHUTTER (S1) 6 SHUTTER (S2) Description Alarm out port for motion detection. (Open collector type) Grounding Port. Displays the current still image when it receives the Trigger signal. (Normal Open Type) This is a port for selecting an external high speed shutter mode.
e the CONNECTING THE AUTO IRIS LENS CONNECTOR MOUNTING THE LENS When using the CS lens Mount the CS lens by rotating it clockwise as shown in the picture: CS lens CS 렌즈 ENG he Installation Connect each uncovered shutter control cables to the Auto Iris Lens Connector as the following When using the C lens Pin No.
Installation CONNECTING CABLES AND CHECKING OPERATION ① Connect one end of the BNC cable to the VIDEO OUT Port on the rear of the camera. ② Connect another end of the BNC cable to the VIDEO IN Port on the monitor. USI ③ Finally connect the power adapter to the camera. You can connect 2 lines of the power adapter to the camera using the Slot Head screwdriver as shown in the picture. (GND: cable with the white stripe line) • E B sa • R • R • 1. ALA 2. GNDRAM 3. TRIG OUT 5. SHU 4. SHU GER TTER IN 6.
wer How to use OSD Menu USING ICONS IN THE MENU • (EXIT) Exits the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. • (RET) Returns to the previous menu. • (HOME) MAIN MENU ÃÃMAIN MENUÃÃ PROFILE CAMERA SET INTELLIGENCE PRIVACY ZONE OTHER SET COMMUNICATION SYSTEM INFO LANGUAGE Returns to the main menu. • (SAVE) Used to save your settings of MASK AREA, PRIVACY ZONE and more.
How to use OSD Menu PROFILE ePROFILEf Pr M ÃSTANDARD ITS BACKLIGHT DAY/NIGHT GAMING CUSTOM WH In the PROFILE menu, you can configure the following camera settings at once.
CAMERA SET Menu Previous Menu Sub-menus WHITE BAL DAY MODE ITS BACKLIGHT DAY/NIGHT GAMING DAY DAY/NIGHT DAY DAY/NIGHT DAY - - - - - ATW2 ATW1 ATW1 ATW1 ATW1 RED 0 0 0 0 0 BLUE 0 0 0 0 0 NIGHT BRIGHTNESS MODE DETAIL STANDARD - - - - - User setting allowed MID User setting allowed MID User setting allowed OFF ATW2 OFF ATW2 OFF RED User setting allowed 0 User setting allowed 0 User setting allowed BLUE User setting allowed 0 User setting allowed 0
How to use OSD Menu ❖ CAMERA ID CAMERA SETUP eCAMERA SETf CAMERA ID OFF VPS OFF IRIS ALC MOTION (F.FAST)--DNR MID SHUTTER OFF SENS-UP AUTO X4 FLICKERLESS (OFF)--XDR MID d c DAY/NIGHT AUTO WHITE BAL DIGITAL ZOOM OFF DETAIL [2] V-SYNC INT AGC COLOR SUP LOW REVERSE OFF POSI/NEGA + PIP OFF d ABCDEFGHIJKLMNOPQRSTUVWXYZ0 123456789 :?-+*()/ SPffeeSP LOCATION CAMERA-1.................. ........................... ② The CAMERA ID menu is used for you to assign a unique name to a camera.
How to use OSD Menu For normal operation, you must select DC for a DC-type lens, and select VIDEO for a VIDEOtype lens. The LEVEL menu is used to adjust the overall brightness, where “+” will increase the brightness and “–” will decrease it. ② If you set the BACKLIGHT option to BLC, you will see a menu where you can set the BLC area. you can set the desired BLC zone by defining the size and location.
How to use OSD Menu ❖ AGC [OFF, VERY LOW, LOW, MID, HIGH, VERY HIGH, USER, FIX] The AGC (Auto Gain Control) menu is used to set the AGC level of the camera. When the AGC is active, the camera automatically increases the sensitivity by amplifying the Video signal when the strength of the signal falls below the normal value. If OFF or FIX mode is selected in the SENS-UP menu, you can specify the AGC level. If you press the SETUP switch with a USER sub menu selected, you will see the appropriate screen.
How to use OSD Menu o be FAST] gth otion. et RM, ntrast a tion. R. UTO 0, d /120) r, ect. es ast e LC However, the auto high speed shutter operates properly only in a camera featuring a DC or VIDEO lens. In external high speed electronic shutter (EXT) mode, you can select one of 8 modes from OFF through 1/100(PAL:1/120) to 1/10K for the high speed electronic shutter. It works as the high speed electronic shutter. You can select an option using SHUTTER(S0), SHUTTER(S1) and SHUTTER(S2) on the rear.
How to use OSD Menu ❖ XDR (eXtended Dynamic Range) [OFF, LOW, MID, HIGH] Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility. Select one from OFF, LOW, MID and HIGH. Closing to HIGH will increase the compensation level. ❖ DAY/NIGHT [DAY,NIGHT,AUTO,EXT] • DAY If set to DAY, it will be fixed to DAY mode regardless of the ambient conditions.
How to use OSD Menu or ode. or ter GH e the • EXT WHITE BAL This enables an auto switch between DAY and NIGHT mode using the interface with the external sensor. ❖ WHITE BAL [DAY/NIGHT] If you want to adjust the color scheme, use the WHITE BALANCE function. DAY/NIGHT BRIGHTNESS MODE RED BLUE R-GAIN B-GAIN NIGHT MID AWC [00]----I---[00]----I---[0248] [0247] • DAY or andGH In DAY mode, you can set the color values of RED and BLUE.
How to use OSD Menu ❖ DIGITAL ZOOM ❖ AGC COLOR SUP [ON/OFF] You can set the digital zoom factor and position. If you press the SETUP switch with the DIGITAL ZOOM function set to ON, you will see the appropriate screen. When the zoom factor and position are defined, the digital zoom function will operate. ❖ REVERSE [OFF, H, V, H/V] [+, -] Output as it is or mirror the video brightness signal. RATIO [X1.
How to use OSD Menu INTELLIGENCE FENCE GC r n the MOTION ADVANCED MASK AREA DISPLAY SENSITIVITY RESOLUTION ALARM OUT 1 OFF OFF OFF OFF 2 3 4 ON [4] [5] You can set the position and detection direction of the LINE, and the size and position of the AREA. You can set the motion detection and tracking in the INTELLIGENCE menu. ❖ MOTION - How to set the line LINE [OFF,TRACKING,DETECTION] • TRACKING Detects and tracks a moving object.
How to use OSD Menu ❖ MASK AREA [1~4] Specify a detection exception area to mask. - How to set the area AREA PIXEL LEVEL [4] PRI Select a mask number and specify the size and position. MASK AREA ① If you press the SETUP switch with the AREA option set to ON, you can specify the position and size of the area. ② If you change the PIXEL LEVEL for setting the position, specify the pixel that moves by a single pressure of the cdef switch.
How to use OSD Menu PRIVACY ZONE SETUP nd n or on ePRIVACY ZONEf 1 7 2 8 3 9 4 10 PRIVACY SET STYLE 5 11 6 12 ON MOSAIC1 The PRIVACY function will protect your privacy by screening the privacy area that you have specified during monitoring. You can specify up to 12 privacy zones. If you set the PRIVACY SET to ON, your PRIVACY ZONE settings will be applied. You can change the style to adjust the mosaic size and color of the PRIVACY ZONE.
How to use OSD Menu OTHER SET SYS COMMUNICATION eOTHER SETf EXTERNAL TRG FACTORY DEFAULTS OSD COLOR eCOMMUNICATIONf OFF BW RS-485 PROTOCOL BAUD RATE ADDRESS SAMSUNG 9600 0 The COMMUNICATION menu is used to configure the settings regarding RS-485 communications. ❖ EXTERNAL TRG Set the EXTERNAL TRG menu to ON and press the SETUP switch to display the appropriate screen. Use the rear panel of the camera to connect to RS-485.
ure How to use OSD Menu ❖ Initial Configuration Table SYSTEM INFORMATION • Camera Configuration eSYSTEM INFOf TYPE 3_BOX_WDR_N PROTOCOL SAMSUNG ADDRESS 1 COMM. TYPE RS-485,HALF BAUD RATE 9600 SERIAL NO. 000000000000000 CAMERA VER. 0.50_090101 EEPROM VER. 0.50_090101 CAMERA ID OFF VPS OFF IRIS ALC AGC VERY HIGH You can view the system information including the protocol, address, baud rate, serial number, camera version, and EEP version. LANGUAGE MOTION DNR (F.
Specifications SPECIFICATIONS Items Sub-items SCC-B2335N Camera Type CCTV Camera (WDR & DAY/NIGHT) Device Image 1/3” Super-HAD PS CCD Total Pixels 811 x 508 Effective 768 x 494 System Scanning Interlace/Progressive Scanning Line 525 lines Frame 30 frame/1sec Horizontal Frequency Vertical Frequency Min. Scene Illumination Internal Mode 15,734 Hz Line-lock Mode 15,750 Hz Internal Mode 59.94 Hz Line-lock Mode Sens-up OFF OFF OFF 512 times 512 times 512 times Condition F No. 1.2 1.2 1.
Specifications Items Sub-items SCC-B2335N Horizontal 600 TV Lines Vertical 350 TV Lines Video Output - VBS 1.0Vp-p, 75 Ω S/N Ratio S/N Ratio Approx. 52dB Lens Drive Type MANUAL/AI(VIDEO/DC) Mount Type CS/C Resolution Lens Alarm Input N/A Output 1 Output Remote Control Coaxitron (Data On Coax cable) Yes (with SCX-RD100) RS-485 Yes (Multi Protocol, 8ea) Environmental Conditions Operating Temperature Less than 90% Power Requirement AC24V ± 10%(60Hz ± 0.
Specifications Items Sub-items SCC-B2335P / SCC-B2035P Camera Type CCTV Camera (WDR & DAY/NIGHT) Device Image 1/3” Super-HAD PS CCD Total Pixels 795 x 596 Effective 752 x 582 System Scanning Interlace/Progressive Scanning Line 625 lines Frame 25 frame/1sec Horizontal Frequency Vertical Frequency Min. Scene Illumination Functions Internal Mode 15,625 Hz Line-lock Mode 15,625 Hz Internal Mode 50 Hz Line-lock Mode Sens-up OFF OFF OFF 512 times 512 times 512 times Condition F No. 1.
Specifications Items Sub-items S/N Ratio 600 TV Lines Vertical 350 TV Lines - VBS 1.0Vp-p, 75 Ω Video Output Lens SCC-B2335P / SCC-B2035P Horizontal Resolution S/N Ratio Approx.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
