Service manual

Samsung Electronics5-40
Alignment and Adjustment
e. Insert the Standard Color Bar Tape(monaural)
and press the PLAY button.
f. Connect the oscilloscope to the addressed Test
Point.
g. Press the “C/RESET(DATA UP)/Z/RTN(DATA
DOWN)” button so as to set the waveform to
be as below.
h. Be sure to press the “MENU/ENTER(CON-
FIRM)” button of CAMCORDER to memorize
setting.
i. Reset the power source so as to fix the new data
to the EEPROM.
2-13. Audio 1.5MHz
: This adjustment is performed to set the
1.5MHz deviation of the audio recording
processor and the adjustment perform in play-
back mode.
If the audio output level is to be 1Vp-p, the
deviation is to be a regulated deviation.
a. Preparations
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the “DATE/TIME(MODE UP)/TITLE
(MODE DOWN)” button of CAMCORDER so
as to select the address 08.
e. Insert the Standard Color Bar Tape(monaural)
and press the PLAY button.
f. Connect the oscilloscope to the addressed Test
Point.
g. Press the “C/RESET(DATA UP)/Z/RTN(DATA
DOWN)” button so as to set the waveform to
be as below.
h. Be sure to press the “MENU/ENTER(CON-
FIRM)” button of CAMCORDER to memorize
setting.
i. Reset the power source so as to fix the new data
to the EEPROM.
14
12
10
8
6
4
2
13
11
9
7
5
3
1
13
VIDEO OUT
12
11
10
9
8
7
6
5
4
3
2
1
AUDIO OUT R
PB RF
AUDIO OUT L
HD SW
VCR UNREG
JIG CS
VCR UNREG
JIG SCK
SS GND
JIG SO
JIG DETECT
JIG SI
AUDIO OUT R
14
MINIMIZE THE DISTORTION.
THE BEST IS SINE WAVE.
14
12
10
8
6
4
2
13
11
9
7
5
3
1
13
VIDEO OUT
12
11
10
9
8
7
6
5
4
3
2
1
AUDIO OUT R
PB RF
AUDIO OUT L
HD SW
VCR UNREG
JIG CS
VCR UNREG
JIG SCK
SS GND
JIG SO
JIG DETECT
JIG SI
AUDIO OUT R
14
1.0±0.02Vp-p
OSCILLOSCOPE
NONE
CN605 PIN 10
08
AUDIO-1.5MHz
EQUIPMENT
OTHER
TEST POINT
ADDRESS
NAME
STANDARD COLOR BAR TAPE
(MONAURAL)
TAPE