DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 1 Operating Instructions VACUUM CLEANER ❈ Before operating this unit, please read the instructions carefully. ❈ For indoor use only. Register your product at www.samsung.
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 2 IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING: Do not use the vacuum cleaner when rug or floor is wet. Do not use to suck up water. 3.
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 3 1 ASSEMBLING THE CLEANER ▼ OPTION Features may vary according to model. For storage, park the floor nozzle.
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 4 2 OPERATING YOUR CLEANER 2-1 POWER CORD NOTE When removing the plug from the socket, please take care to grasp the plug, not the cord in order to avoid undue stress. 2-2 HANDLE CONTROL TYPE ONLY • SLIDE TO THE STOP POSITION Vacuum-cleaner switches off (stand by mode) • SLIDE FORWARD TO MAX Suction capacity increases smoothly up to maximum.
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 5 2-4 USING FLOOR TOOLS DUSTING UPHOLSTERY CREVICE OPTION PARQUET SPECIALIST HARD FLOOR SMART OPTION Blanket brush Cut off pet hairs or threads surrounding brush by using scissors.
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 6 3 DUST FULL INDICATOR If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag, requires replacement. NOTE : If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.
DJ68-00308J(0.1)-EN 3/7/06 9:13 PM Page 7 5 CLEANING THE CYCLONE FILTER (Optional) 1 2 3 4 5 6 7 8 NOTE It is necessary to use Cyclone Filter while cleaning.
DJ68-00308J(0.1)-EN 3/7/06 9:14 PM Page 8 6 CLEANING THE INLET FILTER 1 2 3 NOTE : Do not allow the filter to become clogged as this may cause power reduction or may damage the motor. 7 OUTLET FILTER 2 1 3 - IF YOU HAVE A PROBLEM PROBLEM Motor does not start. Suction force is gradually decreasing. Cord does not rewind fully. Vacuum cleaner does not pick up dirt. CAUSE REMEDY No power supply. Thermal cut-out. Nozzle, suction hose or tube is blocked.
