Spec Sheet

ManualsBrandsSamsung ManualsAccessoriesRack Mount Card Cage With Power Supply

SPECIFICATIONS

ORDERING INFORMATION

FEATURES

› Automatic electronic current limiting feature

› Voltage transient protection on all power and signal input/

output lines provides unconditional protection from power

surges and other voltage transient events.

› (14) Fourteen 1-inch rack slots available

› All modules located within the chassis rack are hot-

swappable

The design approach employed by Hanwha Techwin for equipment mounted

within the card cage rack unit with modular power supply (SBP-C14PS1), provides

for the elimination of a single-point failure in the event of a major fault within any

module located within the chassis rack. This is accomplished through the use of

automatic electronic current limiting within each rack-mountable module, rather

than providing the current limiting within the power supply unit which supports

the power requirements for equipment located within the rack. In nearly all

competing designs,a major fault within a module, located within the chassis rack,

results in the power supply unit going into a current limiting condition, and as a

result, all of the modules within the rack shut down. The rack design employed by

Hanwha Techwin eliminates this possibility, as only the faulty module shuts down,

and the operation of the other modules within the rack continue unimpaired. This

automatic current limiting feature is also self-resetting, should the fault or overload

be of a temporary or intermittent condition. Furthermore, all modules located

within the chassis rack are hot-swappable, so that it is not necessary to power-

down the rack when removing or replacing modules.

SBP-C14

Rack Mount Card Cage With Power Supply

Electrical

Input Voltage 90-264 VAC @ 70 W Maximum

Output Voltage 9 VDC +/- 5% @ 6.5 Amps @ 75˚C

Fusing

1.25 A slow blow 5x20mm (rack power supply)

Plug-in modules individually electronically fused.

Each power supply unit is individually fused.

Power Indicator Red LED

AC Line Cord Detachable, IEC-connected. Allows easy field

replacement or exchange for various worldwide AC

power plug configurations.

Mechanical

Size (L × W × H) 19.0 × 7.5 × 6.9 in. (48.2 × 19 × 17.5 cm)

Rack Slots: (14) 1-inch slots available

Shipping Weight: <5 lbs./2.15 kg

Environmental

MTBF >100,000 hours

Operating Temp -40˚ C to +75˚ C

Storage Temp -40˚ C to +85˚ C

Heat Generation 240 BTU

AGENCY COMPLIANCE

*Power Supply Only

In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

Model Name Description

SBP-C14

SBP-C14PS1

Options

Card Cage Rack + 90-264 VAC 50/60hz Power Supply

90-264 VAC 50/60hz Power Supply Only

SBP-C14BP1 – Blank Panel (1”)

SBP

-C14BP3 – Blank Panel (3”)

FIRST

EDITION 0