HDR44 FOUR SOURCE, FOUR ZONE HIGH DEFINITION VIDEO ROUTER www.atonhome.
HDR44 4x4 High Definition Video Router Safety NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications.
HDR44 4x4 High Definition Video Router Contents Safety Information ...................................................................... 1 1. Introduction .............................................................................. 5 Features ........................................................................................ 6 Front Panel Call-Out ..................................................................... 7 Rear Panel .......................................................................
HDR44 4x4 High Definition Video Router 1. Introduction Modern Convenience The HDR44 4 Source, 4 Zone High Definition Video Router and R44WP HD Receive Wall Plates provide the ability to view up to 4 different video sources in up to 8 separate areas (with additional HDR44 Chassis) of the home for total flexibility and convenience.
HDR44 4x4 High Definition Video Router HDR44 Features • • • • • • • • • • • 4 Source, 4 Zone High Definition Video Router Expandable up to 8 Zones With Additional HDR44 Chassis Passes all Hi-Def Formats including 1080p Sends Component Video, Analog Audio, SPDIF Digital Audio & Two-Way IR Using 2 CAT-5 Cables 500 Foot Range (HDR44 to R44 Wall Plate) Zone Specific IR Control using R44WP Wall Plates or Systemwide Control Using External IR Input Source-Specific IR Routing Capabilities No PC Software Required For
HDR44 4x4 High Definition Video Router Front Panel The front panel of the HDR44 is populated simply by Zone Source LED’s and a single Power LED. Figure 1-3 and Table 1-1 provide descriptions and locations of Front Panel indicators.
HDR44 4x4 High Definition Video Router Rear Panel The Rear Panel of the HDR44 has connections for IR, Expansion I/O, Analog and Digital Audio, Component Video, and Zone Wallplate Outputs . Figure 1-4 and Table 1-2 provide description and location of Rear Panel connections. 11 1 10 2 9 8 3 4 7 5 6 Figure 1-4 : HDR44 Rear Panel Connector Function 1 EXT. IR In 3.5mm Stereo Mini Jack Connector for Use w/ ATON IR Receivers 2 IR ALL Out 3.
HDR44 4x4 High Definition Video Router 2. System Design Overview Applications There are two typical system applications when installing the HDR44. These options can be combined throughout a system depending on the design of the application: 1. 2. Basic 4 Source, 4 Zone System Expanded 4 Source, 5-8 Zone System Basic 4 Zone, 4 Source System Figure 2-1 shows a basic HDR44 system with four sources and four zones.
HDR44 4x4 High Definition Video Router Expanded 4 Source, 5-8 Zone System Figure 2-2 shows an expanded system with four sources and eight zones. The system is comprised of two HDR44 HD Video Routers, 4 Video Sources, 8 R44WP HD Receive Wall Plates, optional AV Receivers in 4 zones, and ATON Storm Series Speakers. This configuration provides video and audio from each source into each zone as well as control of each source from each zone.
HDR44 4x4 High Definition Video Router 3. Connections The HDR44 is part of an integrated system that requires the use of other ATON components. Depending on the system design, these components may include: • R44IRM Slimline IR Remote Control • R44WP HD Receive Wall Plates - one per zone • HDR44 Router - for systems containing from 5 to 8 zones.
HDR44 4x4 High Definition Video Router EXT. IR INPUT ATON multi-room applications can utilize the EXT.IR IN port of a single HDR44 chassis for IR control from a Universal/Learning RF-to-IR remote control. Use a 3.5mm mono interconnect cable to connect between an IR OUT port of a third party RF to IR converter and the EXT. IR IN port of the HDR44. Note: This application is designed to work with a single chassis HDR44 system.
HDR44 4x4 High Definition Video Router SOURCE IR OUTPUTS Connect a standard IR Emitter (ATON AIE2, for example) from the Source IR OUT port on the rear of the HDR44 to the IR receiver on the front of the audio/video source (see Figure 3-4). The four source IR outputs are source specific. For examle, IR port “1” must be mounted to the video source connected to “Component Video Input 1”. For sources that have an IR Input port on the back of the unit, use a 3.5mm to 3.5mm mono interconnect cable instead .
HDR44 4x4 High Definition Video Router COMPONENT VIDEO INPUTS Use high-quality component video cables to make connections between video sources and the HDR44’s inputs. Sources will typically be located near the HDR44 at the headend of the system. Component video outputs as well as audio outputs and IR will be sent via Cat-5 cables from the head-end to R44WP HD Receive wall plates located throughout the house. Use high-quality component video cables to connect to each HD video display from the R44WP as well.
HDR44 4x4 High Definition Video Router AUDIO INPUTS The HDR44 supports a total of four System Sources which are available to all four zones and can be sent to up to a total of eight zones using another HDR44 Router for system expansion. There are two types of Source Inputs. Analog (RCA), and Digital Coaxial. Analog AUDIO INPUTS Use a Stereo RCA patch cable to connect a video source with analog outputs to the HDR44’s Analog Audio Inputs as shown in Figure 3-8.
HDR44 4x4 High Definition Video Router Wall Plate Connections A R44WP HD Receive Wall Plate is required to connect video, audio, and IR to a zone. The R44WP wall plate has component video, audio, and IR connections that connect to the Video and Audio inputs of each zone’s HD Video Display. A run of (2) two Cat-5 Cables terminated to T-568A standard, shown in Figure 3-11, is required between the HDR44 and the location designated for the R44WP.
HDR44 4x4 High Definition Video Router HD Video Display Audio and Video Inputs COMPONENT VIDEO 1 2 DIGITAL COAX OUT 3 IR IN AUDIO 2 1 3 Y Y Y HDMI L L L PB PB PB R R R PR PR PR RCA Stereo Cable Component Video Cable SPDIF Y L PB R PR IR IN 3.5mm Mono Interconnect Cable IR OUT R44WP Figure 3-12: R44WP to HD Video Display © 2008 • All rights reserved.
HDR44 4x4 High Definition Video Router HD Video Display Audio and Video Inputs COMPONENT VIDEO 1 2 DIGITAL COAX OUT 3 IR IN AUDIO 2 1 3 Y Y Y HDMI L L L PB PB PB R R R PR PR PR SPDIF RCA Stereo Patch Cable Y L PB R PR IR IN IR OUT R44WP Figure 3-13: R44WP to Analog Audio Input DIGITAL COAX Home Theater Receiver (Optional) SPDIF Y L PB R PR IR IN IR OUT R44WP Figure 3-14: R44WP to Digital Coax Connector Note: For applications where the SPDIF audio connection needs t
HDR44 4x4 High Definition Video Router IR Connections Front Panel IR Emitter Connection Insert the 3.5mm plug of an IR emitter into the designated IR Out port of the R44WP and place the emitter on the IR receive window of an in-room video source or display. HD Video Display SPDIF Y L PB R PR IR Emitter IR IN IR OUT R44WP Figure 3-15: R44WP Front Panel IR Emitter Connection Rear Panel IR Emitter Connection Run a Cat-5 wire from the R44WP to the location of an in-room video source or AV Receiver.
HDR44 4x4 High Definition Video Router Front Panel IR Receiver Connection Connect an ATON IR Receiver to R44WP front panel IR Input connector as shown in Figure 3-17. HD Video Display SPDIF Y L PB R PR IR Receiver 3.
HDR44 4x4 High Definition Video Router Expansion Connections System Expansion The HDR44 is capable of supporting four sources in up to eight zones. The system may be expanded by adding an additional HDR44.
HDR44 4x4 High Definition Video Router CONTROL LOOP For system expansion, connect the included Cat-5 patch cable from the HDR44’s CONTROL LOOP port to one additional HDR44’s CONTROL LOOP port. This will allow IR signals to pass from the expansion chassis through the first chassis so that the source equipment can be controlled.
HDR44 4x4 High Definition Video Router Analog AUDIO INPUTS Use stereo RCA “Y” cables to split the video source’s analog audio signal between to the main HDR44 and the expansion unit. Note: “Y” cables are only required for the analog audio inputs.
HDR44 4x4 High Definition Video Router 4. Settings & Operation Functions of the HDR44 may be controlled from the R44IRM Remote. IR codes from the R44IRM can also be learned into 3rd party universal learning remotes. Additionally, discrete HDR44 IR codes can be downloaded from the ATON website at www.atonhome.com and imported into most programmable universal learning remotes.
HDR44 4x4 High Definition Video Router Using The R44IRM Remote Individual Zone Control When using R44IRM from an individual zone using an R44WP with an ATON IR receiver, only the four source 1 buttons need to be pressed. The zone buttons are not used. AIR1 IR Receiver SPDIF Y L PB R PR IR IN IR OUT R44WP Figure 4-2: Individual Zone Control System Wide Zone Control When using the R44IRM from a single location using an IR receiver plugged into the EXT.
HDR44 4x4 High Definition Video Router 5. Troubleshooting Table 5-1 provides troubleshooting information for the HDR44. Symptom Possible Cause Solution No audio present in a specific room 1. Source not playing. Press Play, turn ON, etc. 2. Room not selected Select Room on Touchpad or from IR Remote 3. Room Output volume turned all the way down Increase volume on video display or AV Receiver 4. Speakers in room miswired or defective a. Test known good speaker at amplifier location b.
HDR44 4x4 High Definition Video Router Symptom Possible Cause Solution No source control whatsoever, source selection is OK 1. Wiring: IR connected to wrong port Correct connection of IR Emitter 2. IR Emitter defective Replace IR Emitter IR Flooding IR indicator on talk-back emitter is flickering or is constantly lit, indicating IR flooding. Check for ambiant light or plasma tv noise.
HDR44 4x4 High Definition Video Router Appendix A: R44WP HD Receive Wall Plate The R44WP wall plate has component video, digital and analog audio, and IR connections that connect to the Video and Audio inputs of each zones HD Video Display. A run of (2) two Cat-5 Cables terminated to T-568A standard (see page 16) is used between the location designated for the R44WP and the HDR44.
HDR44 4x4 High Definition Video Router Appendix B: Specifications HDR44 Power Requirements 55W System Bandwidth 185MHz, -3dB (90MHz, -0.5dB) Resolution Supported 1080p, 1080i, 720p, 480p, and 480i Video Gain Unity Gain Flatness 60MHz Component Input Y - 1V peak to peak, Pb/Pr - 0.7V peak to peak, 75 ohms Component Loop Output Y - 1V peak to peak, Pb/Pr - 0.
HDR44 4x4 High Definition Video Router R44WP Bandwidth 185MHz, -3dB (90MHz, -0.5dB) Component Output Y - 1V peak to peak, Pb/Pr - 0.7V peak to peak, 75 ohms Terminated Analog Audio Output 2V rms, 100 ohms Digital Coax Output 0.5V peak to peak, 75 ohms Power Supplied by HDR44 (+16VDC, 250mA) Connections Analog Audio Outputs Analog RCA Cable Connectors SPDIF Outputs Digital Coax Connector Component Video Outputs Component Video Cable IR Input 3.
HDR44 4x4 High Definition Video Router Appendix C: REKT Rack Ear Kit (Optional) Use the optional REKT Rack Ear Kit to mount the HDR44 into a standard equipment rack. Then simply use the included screws to attach each rack ear to the side of the HDR44 as shown in Figure C-1. Use Rack screws (not included) to attach the essembled unit to the equipment rack as shown in Figure C-2. Figure C-1: REKT Mounting Rack Ears to Unit Figure C-2: REKT Mounting Unit to Rack © 2008 • All rights reserved.
HDR44 4x4 High Definition Video Router Notes: 32 ©2008 • All rights reserved.
HDR44 4x4 High Definition Video Router Notes: © 2008 • All rights reserved.
HDR44 4x4 High Definition Video Router Notes: 34 ©2008 • All rights reserved.
Limited Warranty ATON* warrants to the purchaser/end user (“you”) that the HDR44 HD Video Router and R44WP HD Receive Wall Plate are to be free from defects in materials and workmanship for a period of two (2) years from date of purchase (the “Warranty Period”). This warranty is transferable to subsequent owners of the product as long as the original proof of purchase is retained.
HDR44 ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS www.atonhome.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Seguridad NOTA: Este equipo ha sido probado y se descubrió que cumple con los límites para un dispositivo digital Clase B, conforme a la Parte 15 de la Reglamentación FCC. Estos límites están diseñados para ofrecer protección razonable contra la interferencia perjudicial en una instalación residencial. Este equipo genera, usa y puede irradiar energía de radiofrecuencia.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Índice Información sobre la seguridad ....................................................... 1 1. Introducción .............................................................................. 5 Características ............................................................................. 6 Texto en el panel frontal .............................................................. 7 Panel trasero ..............................................
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO 1. Introducción Comodidad moderna El Router de video de alta definición HDR44 para 4 fuentes y 4 zonas y las placas para pared del receptor HD R44 WP ofrecen la capacidad de ver hasta 4 fuentes de video diferentes en hasta 8 zonas separadas (con un chasis HDR44 adicional) del hogar para brindar flexibilidad y comodidad total.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Características de HDR44 • • • • • • • • • • • Router de video de alta definición para 4 fuentes y 4 zonas Se puede ampliar hasta 8 zonas con chasis adicional HDR44 Transmite todos los formatos de alta definición incluso 1080p Envía video componente, audio analógico, audio digital SPDIF e IR de dos vías usando 2 cables CAT-5 Alcance de 500 pies (placa para pared HDR44 a R44) Control IR de zonas específicas mediante placas para pared R44WP
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Panel frontal El panel frontal del HDR44 está compuesto simplemente por los indicadores luminosos LED de las zonas fuentes y un solo indicador LED de alimentación. La Dubijo 1-3 y la Tabla 1-1 ofrecen descripciones y ubicaciones de los indicadores del panel frontal..
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Panel posterior El panel posterior del HDR44 tiene conexiones para IR, expansión de entrada y salida, audio analógico y digital, video componente y salidas para la placa de pared por zonas. La Figura 1-4 y la Tabla 1-2 ofrecen la descripción y la ubicación de las conexiones del panel posterior.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO 2. Generalidades del diseño del sistema Aplicaciones Existen dos aplicaciones típicas del sistema al instalar el HDR44. Estas opciones se pueden combinar en todo el sistema según el diseño de la aplicación: 1. 2. Sistema básico de 4 fuentes y 4 zonas Sistema ampliado de 4 fuentes y 5-8 zonas Sistema básico de 4 zonas y 4 fuentes El Dubijo 2-1 muestra un sistema básico de HDR44 con cuatro fuentes y cuatro zonas.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Sistema ampliado de 4 fuentes y 5-8 zonas El Dubijo 2-2 muestra un sistema ampliado con cuatro fuentes y ocho zonas. El sistema consta de dos routers de video HD HDR44, 4 fuentes de video, 8 placas para pared de receptores HD R44WP, receptores AV opcionales en 4 zonas y parlantes serie Storm de ATON. Esta conDubijoción ofrece audio y video desde cada fuente en cada zona así como también control de cada fuente desde cada zona.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO 3. 3. Conexiones El HDR44 es parte de un sistema integrado que requiere el uso de otros componentes ATON.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Entrada IR externa Las aplicaciones para habitaciones múltiples de ATON pueden utilizar el puerto de Entrada IR Externa de un chasis simple de HDR44 para el control IR desde un control remoto universal/ con aprendizaje RF (radiofrecuencia) a IR. Use un cable mono de interconexión de 3.5 mm para conectar un puerto de SALIDA IR de una RF tercera a un conversor IR y el puerto de Entrada IR Externa del HDR44.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Salidas IR fuente Conecte un emisor IR estándar (AIE2 de ATON, por ejemplo) desde el puerto de SALIDA IR FUENTE en la parte trasera del HDR44 al receptor IR en el frente de la fuente de audio/video (véase la Dubijo 3-4). Las cuatro salidas IR fuente son específicamente para la fuente. Por ejemplo, el puerto de IR “1” se debe fijar a la fuente de video conectada a la “Entrada de video componente 1”.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Entradas de video componente Utilice cables para video componente de alta calidad para realizar las conexiones entre las fuentes de video y las entradas del HDR44. Por lo general, las fuentes estarán ubicadas cerca del HDR44 en la cabecera del sistema.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Entradas de audio El HDR44 admite un total de cuatro fuentes de sistema que están disponibles para las cuatro zonas y se puede enviar hasta un total de ocho zonas por medio de otro Router HDR44 para la expansión del sistema. Hay dos tipos de entradas fuente: analógica (RCA) y coaxial digital.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Conexiones de la placa para pared Una placa para pared del receptor R44WP HD debe conectar video, audio e IR a una zona. La placa para pared R44WP posee conexiones de video componente, audio e IR que se conectan a las entradas de audio y video de la pantalla de video de alta definición de cada zona.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Entradas para video y audio de la pantalla de video HD COMPONENT VIDEO 1 2 DIGITAL COAX OUT 3 IR IN AUDIO 2 1 3 Y Y Y HDMI L L L PB PB PB R R R PR PR PR Cable estéreo RCA Cable de video componente SPDIF Y L PB R PR IR IN Cable mono de interconexión de 3.5mm IR OUT R44WP Dubijo 3-12: R44WP a la pantalla de video de alta definición © 2008 • Todos los derechos reservados.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Entradas para video y audio de la pantalla de video de alta definición COMPONENT VIDEO 1 2 DIGITAL COAX OUT 3 IR IN AUDIO 2 1 3 Y Y Y HDMI L L L PB PB PB R R R PR PR PR Cable estéreo RCA SPDIF Y L PB R PR IR IN IR OUT R44WP Dubijo 3-13: R44WP a la entrada de audio analógico DIGITAL COAX Receptor de cine en el hogar (opcional) SPDIF Y L PB R PR IR IN IR OUT R44WP Dubijo 3-14: R44WP al conector
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Conexiones IR Conexión del emisor IR en el panel frontal Inserte el enchufe de 3.5mm de un emisor IR al puerto de salida IR designado de la R44WP y coloque el emisor en la ventana del receptor IR de una fuente de video interna o pantalla.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Conexión del receptor IR del panel frontal Conecte un receptor IR ATON al conector de entrada IR del panel frontal de la R44WP como se muestra en la Dubijo 3-17. Pantalla de video de alta definición SPDIF Y L PB R PR Receptor IR Enchufe mono conector de 3.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Conexiones de expansión Expansión del sistema El HDR44 es capaz de admitir cuatro fuentes en hasta ocho zonas. El sistema se puede expandir agregando un HDR44 adicional.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Bucle de control Para una expansión del sistema, conecte el cable de conexión a la red CAT-5 incluido desde el puerto de Bucle de control del HDR44 a un puerto de Bucle de control del HDR44 adicional. Esto permitirá que las señales IR pasen desde el chasis de expansión a través del primer chasis de manera que el equipo fuente se pueda controlar. Estructura n.º 1 CONTROL LOOP Cable RJ45 (incluido) CONTROL LOOP Estructura n.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Entradas de audio analógicas Utilice cables RCA “Y” estéreo para dividir la señal analógica de audio de la fuente de video del medio hacia el HDR44 y la unidad de expansión. Nota: Los cables “Y” sólo se necesitan para las entradas de audio analógicas. Chasis n.º 1 Salida analógica de fuente de video L Chasis n.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS 4. Ajustes y funcionamiento Las funciones del HDR44 pueden ser controlados desde el control remoto R44IRM. Los códigos IR desde el R44IRM también se pueden conocer en controles remotos universales de aprendizaje de terceros. Además, los discretos códigos IR de HDR44 se pueden descargar desde el sitio web de ATON en www.atonhome.com y se pueden importar a los controles remotos universales de aprendizaje programables.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Cómo usar el control remoto R44IRM Control de zona individuaL Al usar el R44IRM desde una zona individual usando una R44WP con un receptor IR de ATON, solamente se tienen que presionar los botones de las cuatro fuentes 1 . Los botones de zona no se utilizan.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS 5. Problemas y Soluciónes La Tabla 5-1 ofrece información sobre la solución de problemas para el HDR44. Síntoma Posible causa Solución No se percibe audio en una habitación específica 1.La fuente no funciona Presione Reproducir, ENCENDER, etc 2. No se seleccionó habitación Seleccione habitación desde el teclado o desde el control remoto IR 3.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Síntoma Posible causa Solución Baja calidad de audio 1. Recortes o distorsión Reduzca el nivel del receptor AV/amplificador 2. Los parlantes están desfasados Revise detenidamente la polaridad de cada parlante 3.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Apéndice A: Placa para pared del receptor R44WP HD La placa para pared R44WP cuenta con video componente, audio digital y analógico y conexiones IR que se conectan a las entradas de audio y video de cada pantalla de video de alta definición por zonas. Se utiliza una ejecución de dos (2) cables CAT-5 que terminan en T-568A estándar (véase página 16) entre la ubicación designada para la R44WP y el HDR44.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Apéndice B: Especificaciones HDR44 Requisitos de alimentación 55 vatios Ancho de banda del sistema 185MHz, -3dB (90MHz, -0.5dB) Resolución admitida 1080p, 1080i, 720p, 480p, y 480i Video Gain Unidad Aplanamiento de ganancia 60MHz Entrada del componente Y-1V pico a pico, Pb/Pr – 0.7 V pico a pico, 75 ohmios Salida de bucle componente Y-1V pico a pico, Pb/Pr – 0.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS R44WP Ancho de banda 185MHz, -3dB (90MHz, -0.5dB) Salida de componente Y–1 V pico a pico, Pb/Pr – 0.7 V pico a pico, 75 ohmios terminado Salida de audio analógica 2V rms, 100 ohmios Salida coaxial digital 0.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Apéndice C: Equipo con orejeras de soporte REKT (opcional) Use el Equipo con orejeras de soporte REKT para montar el HDR44 en un soporte de equipos estándar. Luego, simplemente use los tornillos incluidos para adherir cada orejera de soporte al HDR44 como se muestra en la Dubijo C-1. Use los tornillos del soporte (no incluidos) para fijar la unidad armada al soporte del equipo como se muestra en la Dubijo C-2.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Notas: 32 ©2008 • Todos los derechos reservados.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO Notes: © 2008 • Todos los derechos reservados.
ROUTER DE VIDEO DE ALTA DEFINICIÓN PARA CUATRO FUENTES Y CUATRO ZONAS Notes: 34 ©2008 • Todos los derechos reservados.
Garantía limitada ATON* garantiza al comprador/usuario final («usted») que el HDR44 y el R44WP estará libre de todo defecto de material y mano de obra por un período de un (1) año a partir de la fecha de compra («Período de Garantía»). Esta garantía se puede transferir a los propietarios subsiguientes del producto con tal que el comprobante de venta original haya sido retenido.