Instructions Getting to know your camera Use this camera in the following order. Thank you for buying a Samsung Digital Camera. Set up the camera driver Take a picture Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.102~105) Take a picture. (p.
DANGER WARNING DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or burst battery could result in fire or injury. – Use battery with the correct specification for the camera. – Do not short circuit, heat or dispose of battery in fire. – Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time.
Contents 026 Things to watch out for when taking pictures 027 Focus lock 027 Using the camera buttons to set the camer camera 027 POWER button 028 Shutter button 028 FD (Face Detection) button 030 ZOOM W / T button 031 Function Description / Info / Up button 032 Macro / Down button 033 Flash / Left button 035 Self-timer / Right button 037 MENU / OK button 038 Fn button 038 039 039 040 040 041 041 042 How to use the Fn menu Fn button: Size Fn button: Quality / Frame rate Fn button: Metering Fn button: Dri
Contents 056 056 057 057 057 058 059 Info / Up button Play & Pause / Down button Left / Right / Menu / OK button Print button Delete button E (Effect) button: Resize E (Effect) button: Rotating an image 059 E (Effect) button: Colour 060 E (Effect) button: Image editing 060 060 061 061 061 SETUP 070 Sound menu 071 Sound 071 071 071 071 071 071 072 Setup menu 073 SETUP1 073 073 074 074 074 074 ACB Red eye removal Brightness control Contrast control Saturation control Start the slide show Selecting Image
Contents MULTIMEDIA 082 MP3 / PMP / TEXT VIEWER mode 082 Downloading files 083 Starting the MP3 / PMP / TEXT VIEWER mode 085 LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode 086 Using the camera buttons to adjust the camer camera 086 086 086 087 087 Volume button Play & Pause / Seeking button Delete button Hold / Equalizer button Play mode button 088 Setting up the playback function using the LCD monitor 089 089 089 090 090 090 090 091 091 091 091 092 092 006 Resume Play mode Skin of MP3 player
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Package Contents Camera User manual, Product warranty Camera strap AV cable AC adapter (SAC-47)/ USB cable (SUC-C3) Software CD (see p.101~102) Earphones 20 Pin Gender Rechargeable battery (SLB-0937 ) Sold Separately SD/SDHC memory card/ MMC (see p.
Identification of features Front & Top Shutter button Microphone POWER button Mode dial Speaker Flash AF sensor/ Self-timer lamp 008 Lens
Identification of features Back Zoom T button (Digital zoom) Zoom W button (Thumbnail) Camera status lamp LCD monitor E (Effect) button Fn / Delete button Camera strap Open Play mode / Print button 5-function button FD (Face Detection) button / MP3, PMP hold button Close USB / AV / DC terminal 009
Identification of features Bottom 5 Function button Memory card slot Function Description/Information/Up button Self-timer/ Right button Flash/ Left button MENU/OK button Tripod socket Battery holder Battery chamber cover Battery chamber slot 010 Macro/Play & Pause/ Down button
Identification of features Self-timer lamp Icon Status Description Blinking – For the first 8 seconds, the lamp blinks at 1 second intervals. – For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a power source You should use the rechargeable battery SLB-0937 supplied with the camera. Be sure to charge the battery before using the camera. SLB-0937 rechargeable battery Specification Model SLB-0937 Type Lithium Ion Capacity 900mAh Voltage 3.7V Charging time (When the camera is turned off) Approx. 150 MIN MP3 Number of images and battery life: Using the SLB-0937 Battery life /Number of images 012 Still image Approx. 105 MIN/ Approx. 210 shots Movie Approx.
Connecting to a power source You can charge the rechargeable battery (SLB-0937) by using the SAC-47 KIT which consists of the AC adapter (SAC-47) and the USB cable (SUC-C3). When the SAC-47 and SUC-C3 are combined, they can be used as an AC cable. Using an AC cable: Connect the AC adapter to the USB cable. It can be used as a power cable. Using a USB cable: Remove the AC adapter (SAC-47). You can download stored images to your PC (p.
Connecting to a power source How to charge the rechargeable battery (SLB-0937) Charging LED of the AC Adapter Charging LED Being Charged 014 Before inserting any cables or AC adapter, check the directions and do not insert using force. It may cause breakage of cable or camera. If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly.
Inserting the battery Inserting the memory card Insert the battery as shown. Insert the memory card as shown. – If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+/-). – When the battery chamber cover is opened, do not force it. This may cause damage to the battery chamber cover. There are 4 indicators for battery condition that are displayed on the LCD monitor.
Instructions on how to use the memory card Be sure to format the memory card (see p.75) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance.
Instructions on how to use the memory card The camera can use SD/ SDHC Memory Cards and MMC (Multi Media Cards). When using a 256MB MMC memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
When using the camera for the first time Charge the rechargeable battery fully before using the camera for the first time. When the camera is turned on for the first time, a menu will be displayed to set date/time, language and battery type in the LCD monitor. This menu will not be displayed after setting up. Set up the date/time, language and battery type before using this camera. Setting up the language 1.
LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. 1 2 3 00010 X5.0 ) & Image Size p.39 p.39 7 Metering p.40 8 Drive mode p.40 9 ISO p.41 10 p.41 9 12 White Balance Exposure compensation /LongTime Shutter Date/Time Saturation 0 13 14 Sharpness/Mic. off 15 Contrast p.46 16 Macro p.32~33 17 Self-timer p.
Starting the Recording mode Selecting modes How to use the Auto mode You can select the shooting modes by using the mode dial on the upper of your camera. Select this mode for quick and easy picture taking with minimal user interaction. How to use the mode dial Select the shooting mode by turning the mode dial to the selection point.
Starting the Recording mode How to use the Program mode Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions. 1. Select the Program mode by using the 00010 mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an 01:00 PM image. 2008/01/01 Refer to page 37-42 for more information about the Program mode menus.
Starting the Recording mode Using the Photo Help guide mode Helps the user learn the correct picture taking method and includes solutions for potential problems that may occur. This also enables the user to practice the best way to take pictures.
Starting the Recording mode How to use the Portrait mode ( ) Selecting the portrait mode will configure the camera with optimal settings for portrait photography. 1. Select the Portrait mode by using the mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an image. 00010 The scene modes are listed below.
Starting the Recording mode How to use the Movie clip mode A movie clip can be recorded for up to 2hours. 1. Select the Movie clip mode by using 00:01:01 the mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button once and movie STANDBY clips are recorded for up to 2 hours. Movie clips will still be recorded if the Shutter button is released. If you wish to stop recording, press the Shutter button again.
Starting the Recording mode Pausing while recording a movie clip (Successive Recording) How to use the Multimedia mode This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. Multimedia mode support the embedded MP3, TextViewer, and PMP(Portable Media Player) program.
Things to watch out for when taking pictures Pressing the Shutter button down half way. Lightly press the Shutter button to confirm focus and flash battery charge. Press the Shutter button all way down to take the picture. The available memory capacity may vary depending on shooting conditions and camera settings.
Focus lock To focus on a subject not positioned in the centre of the picture, use the focus lock function. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the Shutter button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the Shutter button all the way down to avoid taking an unwanted picture. 3.
Shutter button FD (Face Detection) button Used for taking an image or recording voice in the Recording mode. This mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy portraits. In MP3 and PMP mode, this button will lock the camera buttons. In Movie clip mode Pressing the Shutter button down fully starts the process for recording a movie clip.
FD (Face Detection) button This function can detect up to 9 people. When the camera recognises many people at the same time, it will focus on the nearest person. The Digital zoom is not activated in this mode. The effects functions are not activated in this mode. When the camera detects a target face, the white colour focus frame will be displayed over the target face and the gray colour focus will appear over the remaining faces (up to 8).
ZOOM W / T button If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. WIDE Zoom Optical zoom WIDE: Pressing the Zoom W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the Zoom W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
ZOOM W / T button Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. The digital zoom cannot be used in movie clip shots. You may notice a decrease in image quality when using the digital zoom. To view a clearer digital zoom image, press the Shutter button halfway at the maximum optical zoom position and press the Zoom T button again.
Macro ( ) / Down button While the menu is showing, press the Down button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the Macro/Down button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator appears on the LCD monitor.
Macro ( ) / Down button Flash ( ) / Left button Available focusing method, by Recording mode (: Selectable, ∞: Infinity focus range) Mode Auto macro Super macro Macro Normal When the menu is displayed on the LCD monitor, pressing the Left button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the Left button operates as the Flash( ) button. 1.
Flash ( ) / Left button 034 If you press the Shutter button after selecting the Auto, Fill-in, Slow synchro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move the camera until the second flash fires. Using the flash frequently will reduce the life of the battery. Under normal operating conditions the re-charging time for the flash is usually within 4 seconds. If the battery is weak, the charging time will be longer.
Flash ( ) / Left button Self-timer ( Available flash mode, by Recording mode (: Selectable) ) / Right button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the Right button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image.
Self-timer ( ) / Right button Selecting the self-timer 1. Select a Recording mode with the exception of Voice recording mode. (p.20) 00010 2. Press the Self-timer ( ) button until the desired mode indicator displays on the LCD monitor. 01:00 PM 2007/08/01 3. When you press the Shutter button, the picture will be taken after the specified time has elapsed.
Self-timer ( ) / Right button In the following cases, the Motion Timer may not operate. The focus distance is over 3m. 00010 The exposure is too bright or dark In backlight conditions. The movement is insignificant The movement is detected 01:00 PM beyond the center part (50%) of the sensor where the movement
Fn button How to use the Fn menu You can use the Fn button to set the following menus. (: Selectable) Page SIZE p.39 QUALITY/ FRAME RATE p.39 METERING DRIVE p.40 p.41 ISO p.41 EXPOSURE VALUE p.42 *1 *1 This menu is only available in the Night scene mode ( 038 p.43 ). QUALITY SIZE p.40 WHITE BALANCE LONG TIME SHUTTER 1. Press the Fn button in an available mode 2. Select a desired menu by pressing the Up/Down button.
Fn button: Size Fn button: Quality / Frame rate You can select the image size appropriate for your application. You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Fn button: Metering Fn button: Drive mode If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. Icon Metering Mode Multi Single Description Multi Exposure will be calculated based on an average of light in each image area divided into multiple regions. However, the calculation will be biased towards the centre of the image area. This is suitable for general use.
Fn button: ISO Fn button: White balance You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. The white balance control allows you to adjust the colours to appear more natural. Auto Icon ISO Mode Auto ISO 80 ISO 100 ISO 200 ISO 400 ISO 800 ISO 1600 ISO 3200 Auto WB Description Icon The camera’s sensitivity is automatically changed by variables such as lighting value or subject brightness.
Fn button: White balance Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the CUSTOM ( ) menu of the White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white. 2. MENU/OK OK button: Selects previous custom white balance.
Fn button: Long time shutter This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in Night scene mode, you can set the shutter speed and aperture values to your preference. Changing the Shutter speed and Aperture value 1. Select the [Nightscene] mode. (p.23) 2. Press the Fn button and Long Time shutter menu will be displayed. 3. Configure the Long Time shutter value with the 5 function button. 4. Press the Fn button again.
E (Effect) button It is possible to add special effects to your images by using this button. Available Effects, by recording mode Mode E button (: Selectable) Mode E button E (Effect) button: Photo Style Selector You can add various effects to the image without an image editing software. Press the E button in an available mode.
E (Effect) button: Image editing Press the E button in the [Program], [Movie], [Portrait], [Children], [Close up], [Self Shot], [Food] and [Café] scene modes. Custom colour: You can change the R (Red), G (Green) and B (Blue) values of the image. Color Colour 1. Select the Color( ) menu by pressing the Up/Down button. 2. Select the desired sub menu by pressing the Left/ Left Right button and press the OK button. 3. Press the Shutter button to take an image.
E (Effect) button: Image editing Sharpness Press the E button in the [Program] mode. 1. Select the Sharpness( ) menu by pressing the Up/Down button and a bar for selecting the sharpness will be displayed. 2. Change the sharpness by pressing the Left Right button. Left/ 3. Press the Shutter button to take an image. Saturation 1. Select the Saturation( ) menu by pressing the Up/Down button and a bar for selecting the saturation will be displayed. 2. Change the saturation by pressing the Left Right button.
Using the LCD monitor to adjust the camera settings You can use the menu on the LCD monitor to set up recording functions. The items indicated by Menu Sub menu Available mode Multi AF p.47 ACB Off On p.48 Voice Mute Scene mode Off Off p.50 Nightscene Children Close up Text Sunset Dawn Backlight Firework - Focus Area Center AF Multi AF p.49 On Beach&Snow Self Shot Back p.
ACB Voice Memo This function is to adjust the contrast automatically when taking photos in an environment with big exposure difference i.e. backlight or contrast. This function adjusts the brightness automatically and allows the subject to be photographed clearly. You can add your voice-over to a stored still image. (Max. 10 sec.) - [ACB] Sub menus: [Off], [On].
Voice recording A voice can be recorded for as long as the available recording time (Max. 10 hour) allows. Press the Shutter button to record a voice. – Press the Shutter button once and voice is recorded for as long as the available recording time (max:10 hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the Shutter button is released. – If you wish to stop recording, press the Shutter button again. – File type: *.
Recording the movie clip without voice Starting play mode You can record the movie without voice. Select [Voice Mute] menu in the Movie clip mode. (p. 24) ( ) icon will appear on the LCD monitor. Press the Shutter button and a movie will record for as long as the memory capacity allows without voice. RECORDING Voice Mute Back Off On OK Set 00:01:01 Turn the camera on and select Play mode by pressing the Play mode ( ) button. The camera can now play back the images stored in the memory.
Starting play mode Playing back a movie clip 1. Select the recorded movie clip that 100-0010 you want to play back by using the Left Right button. Left/ 2. Press the Play & Pause ( ) button to playback a movie clip file. – To pause a movie clip file while 00:00:02 playing it back, press the Play & Play E Capture Pause ( ) button again. – Pressing the Play & Pause ( ) button again will cause the movie clip file to restart. – To rewind the movie clip while it is playing, press the Left button.
Starting play mode On camera movie trimming You can extract desired frames of movie clip during the movie clip play back. If the running time is under 10 seconds, the movie clip can’t be trimmed. 1. Press the Play & Pause ( ) button 00:00:24 at the point of the movie clip where you T Trim E Capture want to start extracting. 2. Press the T button. 3. Press the Play & Pause ( ) button and the extracted range will be displayed on the status bar. 4.
Starting play mode LCD monitor Indicator Playing back a voice memo The LCD monitor displays shooting information about the displayed image. 1. Select a still image that has the voice memo. 2. Press the Play & Pause ( ) button to play back the voice memo. – To pause the voice memo, while playing it back, press the Play & Pause ( ) button again. – To resume playback of the voice memo, press the Play & Pause ( ) button.
Using the camera buttons to set the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Play mode button If you have turned on the camera by pressing the POWER button, you can press the Play mode button once to switch to Play mode and press it again to switch to Recording mode. You can turn the power on with the Play mode button. The camera is turned on in play mode. Press the Play mode button again to turn off the camera.
Using the camera buttons to set the camera Image enlargement 1. Select an image that you want to enlarge and press the Enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the Thumbnail button will zoom back to the original full sized image. – You can tell whether the image displayed is an enlarged view by x 2.0 checking the image enlargement indicator shown at the top left of the LCD monitor.
Info ( ) / Up button When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info( ) button will display image information on the LCD monitor. 100-0010 100-0010 Info ( Info ( ) button ) button ISO AV TV Flash Size Date Info ( 80 3.
Left / Right / Menu / OK button Left/Right/MENU/OK button activate the following. – Left button: While the menu is showing, the Left button operates as a direction button. While the menu is not showing, press the Left button to select the previous image. – Right button: While the menu is showing, the Right button operates as a direction button. While the menu is not showing, press the Right button to select the next image.
E (Effect) button: Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the Play mode button and press the E button. 2. Press the Left/ Left Right button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up/Down button and press the OK button. – Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files can’t be resized.
E (Effect) button: Rotating an image You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the Play mode button and press the E button. 2. Press the Left/ Left Right button and select the [ROTATE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up/ Down button.
E (Effect) button: Colour E (Effect) button: Image editing 1. Press the Play button and press the E button. Custom colour You can change the R(Red), G(Green) and B(Blue) values of the image. 2. Select ( ) menu tab by pressing the Left/ Left Right button. ACB Custom Color You can automatically adjust the brightness of the dark area, caused by under exposure to the light source.
E (Effect) button: Image editing Brightness control Saturation control You can change the brightness of the image. You can change the saturation of the image. 1. Select ( ) by pressing the Up/Down button and a bar for selecting the brightness will be displayed. 2. Change the brightness by pressing the Left Right button. Left/ 3. Press the OK button and the image will be saved as a new file name. Brightness ◀▶ Move OK Set 1.
Setting up the play back function using the LCD monitor Play mode functions can be changed by using the LCD monitor. In the Play mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the Play mode button or Shutter button. Menu Tab Main Menu Sub Menu Sub Menu Page Menu Tab Main Menu Images Show Start SLIDE SHOW ( ) PLAY BACK ( ) 062 Play / Repeat Play – p.
Setting up the play back function using the LCD monitor Menu Tab Main Menu Type Quality Date File Name Reset Sub Menu Sub Menu Starting the slide show ( Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. Page 1. Press the Play mode button and press the MENU button. 2. Press the Left/ Left Right button and select the [SLIDE SHOW] menu tab.
Starting the slide show ( ) Selecting Images Configure slide show effects You can select image to view. Unique screen effects can be used for the slide show. 1 Use the Up/Down button to select the [Image] menu and press the Right SLIDE SHOW Show Start button. All Images 2. Select a desired sub menu by pressing Date▶ Effect Select▶ Interval the Up/Down button. Music [All]: All images saved in the Memory are played back. OK Set Back [Date]: Images taken in a specified date are played back.
Starting the slide show ( ) Setting play interval Setting Background Music Set the slide show play interval. Set the slide show music. 1. Select the [Interval] sub menu by pressing the Up/Down button and press the Right button. 2. Use the Up/Down button to select the desired interval. 3. Press the OK button to save the configuration. SLIDE SHOW Show Start Images Effect Interval Music Back 1 sec 3 sec 5 sec 10 sec OK Set The loading time depends on the image size and quality.
Playback ( ) Voice memo You can add your voice to a stored still image. 100-0010 100-0010 PLAYBACK Voice Memo Off Protect On Delete DPOF Copy To Card 00:00:00 Back OK Set 00:00:06 SH Start SH Stop – Press the Shutter button to take a picture. The images are saved on the memory. After saving the image, the voice is recording for 10 seconds. – To stop the recording, press the Shutter button.
Playback ( ) – OK button: Press the OK button to display the confirmation message. Select the [Yes] menu and press the OK button to delete marked images. [All]: Displays confirmation window. Select the [Yes] menu and press the OK button to delete all unprotected images. If there are no protected images, all the images are deleted and a [No Image!] message will display. 3. After deletion, the screen will be changed to the play mode screen.
Playback ( ) Standard This function allows you to embed printing quantity information on a stored image. 1. Press the Up/Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and [Standard] sub menu will be displayed. 3. Select a desired sub menu by pressing the Up/Down button and press the OK button. [Select]: Selection window for an image to print is displayed. – Up/Down/Left/ Left Right button: Select Left/ an image to print.
Playback ( ) Print size You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. 1. Press the Up/Down button and select the [DPOF] menu tab. And then press Select Standard the Right button. All Index 2. Press the Right button again and select Size Cancel the [Size] sub menu will be displayed. 3. Select a desired sub menu by pressing OK Set Back the Up/Down button and press the OK button.
Playback ( ) When this menu is selected without inserting a memory card, the [No Card!] message will be displayed. If there is not enough space available in the memory card to copy saved images in the internal memory (34MB), the [Copy To Card] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the Playback mode. Please be sure to delete any unnecessary files to free up space before inserting the memory card into the camera.
Sound ( ) Volume You can set select a volume of start up sound, shutter sound, beep sound and AF sound. – [Volume] sub menu: [Off], [Low], [Medium], [High] Beep Sound SOUND Volume Start Sound Shutter Sound Beep Sound AF Sound Self Portrait Back Off Low Medium High OK Set – Start Sound: [Off], [Sound 1], [Sound 2], [Sound 3] – If the start up image is set to [Off], the start up sound will not activate, even though you may have set these to on.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice recording mode. The items indicated by Sub menu 한국어 ENGLISH DEUTSCH DANSK Page FRANÇAIS ESPAÑOL ITALIANO PORTUGUÊS DUTCH SVENSKA SUOMI Date&Time p.73 POLSKI World Time – Samoa, Midway Honolulu, Hawaii Alaska LA, San Francisco Denver, Phoenix mm/dd/yy p.
SETUP1 ( ) Language Setting up the Date / Time / Date type There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. You can change the date and time that will be displayed on the captured images and set up the date type. – Language sub menu: English, Korean, French, German, Spanish, Italian, S.Chinese, T.
SETUP1 ( ) Start up image Quick view You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. – Sub menus: [Off], [Logo], [User Image] – Use a saved image for the start-up image with the [Start Image] in the [RESIZE] menu in the play mode.
SETUP2 ( ) Formatting a memory If you run [Format] on the memory, all files which are image, video clip, multimedia, world tour guide and even protected images will be deleted. So be sure to download important files to your PC before formatting the memory. – Sub menus [No]: The memory will not be formatted. [Yes]: A window for confirming the selection displays. SETUP2 Format Reset File Imprint Power Off Video Out Back If you select the [Yes] menu, another window for confirming the selection will be displayed.
SETUP2 ( ) File name This function allows the user to select the file naming format. SETUP2 Format Reset File Imprint Power Off Video Out Back File name 076 Reset Series OK Set Description Reset After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card.
SETUP2 ( ) Imprinting the recording date Auto power off There is an option to include DATE/TIME on still images. This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. – Sub menus [Off]: The DATE & TIME will SETUP2 Format not be imprinted on the Reset image file. File [Date]: Only the DATE will be Off Imprint Date Power Off imprinted on the image Date&Time Video Out file.
SETUP2 ( ) Selecting video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. Yellow - Video White - Sound Connecting to an external monitor When the camera is connected to an external monitor, the image and menus on the LCD monitor will be visible on the external monitor and the LCD monitor of the camera.
PictBridge SETUP2 ( ) You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. Auto focus lamp You can turn on and off the Auto Focus lamp. – Sub menus [Off]: The AF lamp will not light up in low light conditions. [On]: The AF lamp will light up in low light conditions.
PictBridge PictBridge: Picture Selection If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. In this case, remove the cable and do steps 1 and 2 again. Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. – Pressing the Left/ Left Right button: Selects a previous / next image.
PictBridge: Print Setting PictBridge: Reset You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Press the MENU button and the PictBridge menu will be displayed. 2. Use the Up/Down button to select the desired menu, and then press the Right button. 3. Use the Up/Down button to select the desired sub menu value, and then press the OK button.
MP3 / PMP / TEXT VIEWER mode This camera has an embedded MP3, TEXT VIEWER & Portable Media Player program. You can take a picture, listen to the MP3 files and watch the movie clip (Movie and Video clip) whenever you want. To use the PMP mode, you must convert the multimedia file with the Samsung Converter. In the TEXT VIEWER mode you can see the text on the LCD monitor with listening MP3 music. If the file or folder name is over 120 (Including 1 Byte/2 Byte language, Korean, Chinese, etc.
Starting the MP3 / PMP / TEXT VIEWER mode Take care of the illegal duplication of MP3 & multimedia files. It violates various copyright laws. Without permission of Samsung, you cannot copy, modify and/or distribute any part or all of MP3, PMP file provided in the internal memory This camera can only play back MP3 files in the MP3 mode and SDC files (modified XviD MPEG4 video / MPEG Layer2 audio type) in the PMP mode.
Starting the MP3 / PMP / TEXT VIEWER mode 01-Audio Track 01.mp3 02-Audio Track 02.mp3 Move OK Select [SDC]-move sample.sdc Move OK Who bent my camera? Select 1. Samsung camera.txt Thank you for buying a Samsung Camera. 1. Samsung camera.txt This manual will guide you through using the camera, includin capturing images, downloading images and using the application software.
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode The LCD monitor displays information about the MP3, multimedia and Text file. TEXT VIEWER mode Battery (p.15) MP3 mode Battery (p.15) Lock (p.87) Equalizer (p.87) Mute (p.86) Playing time TEXT Contents Bit rate (p.84) Playback mode (p.89) Volume (p.86) Title of file Play & Pause / Control button (p.86) Current page/Whole page Indication of present TEXT Thank you for buying a Samsung Camera.
Using the camera buttons to adjust the camera Volume button Delete button You can control the volume with this button. There are 0 ~ 30 steps. This deletes files stored on the memory. – Mute ( ): You can mute the MP3 sound with the Up button. Play & Pause / Seeking button 086 When a file is playing back, press the Down button to pause the file. Pressing it again will resume playback. MP3 mode You can search the MP3 files by pressing the Left/Right button.
Using the camera buttons to adjust the camera Hold / Equalizer button If you press the Hold button for over 1 second, the camera buttons are locked. – If the camera buttons are locked, the buttons can’t be operated while playing back. But Power off, Video out, USB connection and LCD on functions can be operated. Play mode button While a multimedia file is playing back, you can select a desired file by using the browsing menu. 1. While a multimedia file is playing back, press the Play mode button. 2.
Setting up the playback function using the LCD monitor MP3 / PMP / Text Viewer mode functions can be changed by using the LCD monitor. Press the MENU button and the menu will be displayed on the LCD monitor.
Setting up the playback function using the LCD monitor Resume Play mode You can set the playback type. You can set various repeat and shuffle options. This function is adopted only in the selected folder. 1. Press the MENU button in each mode. 2. Select a desired playing type in the [Resume] menu by pressing the Up/Down button and pressing the OK button.
Setting up the playback function using the LCD monitor Playing back the slide show While the MP3 file is playing back, captured images are displayed on the LCD monitor continuously. [Play]: Display the images once. [Repeat Play]: Display the images continuously. When the playing back is complete, the slide show will stop. To stop the slide show, press the E button. SLIDE SHOW SHOW PLAY Play SHOW INTERVAL ▶ Repeat Play All files stored on the memory card will be deleted.
Setting up the playback function using the LCD monitor Display setting Setting up the recording function in the MP3 mode You can set the play back function display on the LCD. You can take a picture and listen to the MP3 files at the same time. [5 sec]: If there is no operation for 5 seconds, Menu bar will PLAYER DISPLAY disappear. 5sec On [On]: Menu bar will appear on the Off LCD monitor. [Off]: Menu bar will not appear on the LCD monitor.
Setting up the playback function using the LCD monitor MP3 BGM Setting Important notes Be sure to observe the following precautions! You can play MP3 files when you are playing the text. [Off]: [On]: You cannot play the MP3 files. When you are playing the text, you can play the MP3 files. The last played MP3 files will be executed. – Areas exposed to extremes of in temperature and humidity. – Areas exposed to dust and dirt. – Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
Important notes – This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. – If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. – Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
Warning indicator There are several warnings that may appear on the LCD display. [ Card Error ! ] • Memory card error. Turn off the camera power and turn it on again. Insert the memory card again. Insert and format the memory card. (p.75) [ Card Locked! ] • The memory card is locked. SD/SDHC memory card: Slide the write protect switch to the top of the memory card. [ No Card! ] • A memory card is not inserted. Insert the memory card. Turn off the camera power and turn it on again.
Before contacting a service centre Please check the following. The camera doesn’t switch on. • There is low battery capacity. Insert fresh batteries. (p.15) • Battery is inserted incorrectly with the polarities reversed. Insert the battery according to the polarity marks (+, -). The camera power ceases while in use. • The battery is exhausted. Insert fresh batteries. • The Camera is turned off automatically. Turn on the camera power again. Battery power quickly drains.
Before contacting a service centre The images are unclear. • A picture was taken of a subject without setting an appropriate macro mode. Select an appropriate macro mode to take a clear image. • Taking a picture beyond the flash range. Take a picture within the flash range. • The lens is smudged or dirty. Clean the lens. The flash does not fire. • Flash off mode has been selected. Dis-engage flash off mode. • The camera mode can’t use the flash. Refer to the FLASH instruction. (p.
Specifications Image Sensor – Type: 1/2.5” CCD – Effective Pixel: Approx. 8.2 Mega-pixel – Total Pixel: Approx. 8.3 Mega-pixel Flash Lens – Focal Length: Samsung lens f = 6.3 ~ 18.9mm (35mm film equivalent: 38 ~ 114mm) – F No.: F3.5(W) ~ F4.5(T) – Digital Zoom: Still Image mode: 1.0X ~ 5.0X Play mode: 1.0X ~ 10.2X (depends on image size) LCD Monitor – 2.
Specifications – Movie Clip • With Audio or without Audio (user selectable, recording time : memory capacity dependent, max 2hours) • Size: 800x592, 640x480, 320x240 • Frame rate: 30 fps, 20 fps, 15 fps (20 fps for 800x592) • Optical Zoom up to 3.
Specifications Interface Power Source – Digital output connector: USB 2.0 High Speed 20 pin connector – Audio: Mono(Speaker), Stereo(Earphone) – Video output: NTSC, PAL (user selectable) – DC Adapter: 4.2V, 20 pin connector – Rechargeable battery: SLB-0937, 3.7V (900mAh) – Adaptor: SAC-47, SUC-C3 Included battery may vary depending on sales region. Dimensions (WxHxD) – 94.5X57X17.5mm (excluding protrusions) Weight – 139.
Specifications Text Specification File – TXT extension name, up to 99999 pages File format – Window: ANSI (Windows 98 or later), Unicode / Unicode (Big-Endian) / UTF-8 (Windows 2000/XP) – Mac: ANSI, Unicode (UTF-16) Function – – – – Language – English, Korean, French, German, Spanish, Italian, Chinese, Taiwanese, Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Bahasa, Polish, Hungarian, Czech, Turkish. * Supportable language is subject to change without prior notice.
About the software System requirements For Windows PC with processor better than Pentium II 450MHz (Pentium 800MHz recommended) * Samsung Converter PC with processor better than Pentium 500MHz (Pentium IV recommended) For Macintosh After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver.
About the software Setting up the application software Samsung Converter: Multimedia converting program To use this camera with a PC, install the application software first. Multimedia (Movie, Video clip, etc) files can be converted into movie clips that can be played back on this camera. This software is only compatible with Windows. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program.
Setting up the application software 3. To play back the movie clip recorded with this camera on the computer, install the XviD codec. The XviD codec is distributed according to the GNU General Public License and everyone can copy, distribute and change this codec. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. For more information, see the License documents (http://www.
Setting up the application software 4. Install the software by instructions on the monitor.
Setting up the application software 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. If your OS is Windows XP/ Vista, an image viewer program will open. If the download window of Samsung Master opens after starting Samsung Master, the camera driver was set up successfully.
Starting PC mode If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to “computer connection mode”. In this mode, you can download stored images to your PC through the USB cable. Connecting the camera to a PC Camera settings for connection 1. Turn on the camera 2. Connect the camera and computer with the supplied USB cable. 3. Turn on the computer. The camera and computer are connected. 4.
Starting PC mode Downloading stored images You can download the still images stored on the camera to your PC’s hard disk and print them or use a photo editing software to edit them. 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. – [Cut]: cuts a selected file. – [Copy]: copies files. 1. Connect the camera to your PC with the USB cable. 2. On your computer’s desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 5.
Starting PC mode – By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection.
Removing the removable disk 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.1 ~ 10.4. 3.
Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. 4. Disconnect the USB cable. 5. Remove the [Samsung USB Driver] on the Add/Remove Programs Properties. 6. Uninstallation is complete.
Samsung Converter 7. You can play back the converted movie clip in the Play mode of the camera. Refer to the [Help] menu in Samsung Converter for further information. Who bent my camera? Before converting a multimedia file, check whether it plays back correctly on the Windows Media Player. The converted files are saved as *.sdc file type that can be played back on the Windows Media Player. The Samsung Converter doesn’t cover every kind of codec.
Samsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To run the Samsung Master, double click the Samsung Master icon on the desktop. Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. – To download the captured images, select the [Select All] button. – Select desired folder in the window and click the [Select All] button.
Samsung Master Image viewer: You can view the stored images. – Image viewer functions are listed below. 1 Menu bar: You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. 2 Image selection window: You can select the desired images in this window. 3 Media type selection menu: You can select image viewer, image edit and movie edit functions in this menu. 4 Preview window: You can preview an image or a movie clip and check the multi media information.
Samsung Master Movie edit: You can get the still image, movie clip, narration, music files together in a movie clip. – Movie clip edit functions are listed below. 1 Edit menu:You can select the following menus. [Add Media]: You can add other media elements to a movie. [Edit Clip]: You can change the brightness, contrast, colour and saturation. [Effects]: You can insert an effect. [Set Text]: You can insert texts. [Narrate]: You can insert a narration.
FAQ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer.
FAQ [Installing codec for Mac OS] When the movie clip doesn’t play back on the PC 1) Visit the following site for downloading the codec. (http://www.divx. com/divx/mac) 2) Click the [Free Download] menu on the top right side of the window then download windows appears. 3) Check the version of Mac OS and click the [Download] button to download the file and save it on a desired folder. 4) Run the downloaded file and the codec for playing back the movie clip will be installed.
FAQ If a PC connected with the camera stops responding while Windows is starting. In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus don’t have Legacy USB Support) If you can’t change the menu by yourself, contact to the PC manufacturer or BIOS manufacturer.
FCC notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.