User manual SyncMaster S19B150B S24B150BL The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE 7 Copyright 7 7 Icons used in this manual Symbols for safety precautions 8 Cleaning 8 9 9 Cleaning Securing the Installation Space Precautions for storage 10 Safety Precautions 10 11 13 Electricity and Safety Installation and Safety Operation and Safety 17 Correct posture to use the product 18 Checking the Contents 18 19 Removing the Packaging Checking the Components 20 Parts 20 22 Frontal B
Table Of Contents SCREEN SETUP CONFIGURING TINT 32 Brightness 32 Configuring Brightness 33 Contrast 33 Configuring Contrast 34 Sharpness 34 Configuring Sharpness 35 SAMSUNG MAGIC Bright 35 Configuring SAMSUNG MAGIC Bright 36 Coarse 36 Adjusting Coarse 37 Fine 37 Adjusting Fine 38 SAMSUNG MAGIC Color 38 Configuring SAMSUNG MAGIC Color 39 Red 39 Configuring Red 40 Green 40 Configuring Green 41 Blue 41 Configuring Blue 42 Color Tone 42 Configuring the Color Tone Se
Table Of Contents RESIZING OR RELOCATING THE SCREEN SETUP AND RESET 44 H-Position & V-Position 44 Configuring H-Position & V-Position 45 Image Size 45 Changing the Image Size 46 Menu H-Position & Menu V-Position 46 Configuring Menu H-Position & Menu VPosition 47 Reset 47 Initializing Settings (Reset) 48 Language 48 Changing the Language 49 Eco Saving 49 Configuring Eco Saving 50 Off Timer On/Off 50 Configuring Off Timer On/Off 51 Off Timer Setting 51 Configuring Off Timer S
Table Of Contents INFORMATION MENU AND OTHERS INSTALLING THE SOFTWARE TROUBLESHOOTING GUIDE SPECIFICATIONS APPENDIX 57 Menu Transparency 57 Changing Menu Transparency 58 INFORMATION 58 Displaying INFORMATION 59 Magic Tune 59 59 60 What is MagicTune? Installing the Software Removing the Software 61 MultiScreen 61 62 Installing the Software Removing the Software 63 Requirements Before Contacting Samsung Customer Service Center 63 63 63 Testing the Product Checking the Resolution and Fr
Table Of Contents 78 Responsibility for the Pay Service (Cost to Customers) 78 78 78 Not a product defect A Product damage caused by customer's fault Others 79 Correct Disposal 79 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 80 Terminology Table Of Contents 6
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor screen using a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space z Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 10 cm(3.93 inches) 10 cm(3.93 inches) 10 cm (3.93 inches) 10 cm (3.93 inches) 10 cm(3.
Before Using the Product Safety Precautions Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. z An electric shock or fire may result. Do not plug many products into the same power socket. z Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. z Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. z The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. z ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. z If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). z The product may fall and break or cause a personal injury. z Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. z ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. z The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product Do not put a heavy object, toy, or sweets on top of the product. z The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury. During a lightning or thunderstorm, remove the power cord and do not touch the antenna cable. z ! An electric shock or fire may result. Do not drop objects on the product or apply impact. z An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable.
Before Using the Product 100 Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product. z If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 73). z Product failure, an electric shock or fire may result.
Before Using the Product Do not let water enter the DC power adapter or get the adapter wet. z An electric shock or fire may result. z Avoid using the product outdoors where it can be exposed to rain or snow. z Be careful not to get the DC power adapter wet when you wash the floor. Do not put the DC power adapter near to any heating apparatus. z Otherwise, a fire may result. Keep the DC power adapter in a well-ventilated area.
Before Using the Product Exercise caution when adjusting the product angle or stand height. ! z Otherwise, children's fingers or hands may become stuck and injured. z Tilting the product excessively may cause it to fall and result in personal injury. Do not place heavy objects on the product. z Product failure or personal injure may result. Correct posture to use the product Use the product in the correct posture as follows. z Straighten your back.
1 1.1 Preparations Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the styrofoam from the product. 3 Check the components and remove the styrofoam and plastic bag. This image is for reference only. 4 Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations 1.1.2 Checking the Components z Contact the dealer from whom you purchased the product if any item is missing. z The appearance of the components and items sold separately may differ from the image shown. Components Quick setup guide Warranty card (Not available in some locations) User manual Power cable DC power adapter D-SUB cable (optional) DVI cable (optional) Stand Stand Connector Components may vary depending on the country.
1 1.2 Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide SAMSUNG MAGIC BRIGHT AUTO SAMSUNG MAGIC BRIGHT AUTO This is a touch-type button. Tap the button lightly with a finger. Icons Description z z MENU Open or close the onscreen display (OSD) menu, or return to the parent menu.
1 Preparations Icons Description Move to the upper or lower menu or adjust the value for an option on the OSD menu. Adjust the screen brightness. Confirm a menu selection. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DC DC Port 14V DVI IN 14V DVI IN RGB IN RGB IN Ports Connect to the DC power adapter. Connect to a PC using the DVI cable. Connect to a PC using the D-SUB cable.
Installation 1.3.1 Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. RELEASE Check if the Stand Connector is firmly connected. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed. DVI IN RGB IN RGB IN Insert the Stand Connector into the Stand in the direction shown by the figure. LOCK 14V DVI IN 14V DC 1.
1 Preparations 1.3.2 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -1° (± 2°) ~ 20° (± 2°) z You can adjust the tilt of your monitor. z Hold the lower part of the product and adjust the tilt carefully. 1.3.3 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer.
2 2.1 Connecting and Using a Source Device Before Connecting DC 14V DVI IN RGB IN 2.1.1 Pre-connection Checkpoints z Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. z Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. z 2.2 Check the types of ports at the back of the product you want to connect.
2 2.3 Connecting and Using a Source Device Connecting and Using a PC 2.3.1 Connecting to a PC z Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using the D-SUB Cable (Analogue Type) Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable.
2 Connecting and Using a Source Device 2.3.2 Driver Installation z You can set the optimum resolution and frequency for this product by installing the corresponding drivers. z An installation driver is contained on the CD supplied with the product. z If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Connecting and Using a Source Device 2.3.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. The optimal resolution for this monitor is as follows: **** x **** **Hz Follow the above settings to set the resolution. English EXIT 1 2 Press [ AUTO ] to move to the language you want and press [ ].
2 Connecting and Using a Source Device 2.3.4 Changing the Resolution Using a PC z Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. z The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel 1 Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution.
3 3.1 Screen Setup Configure the screen settings such as brightness and color tone. Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. z SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. z Not available if Eco Saving is set to On. 3.1.1 Configuring Brightness 1 Press any button on the front of the product to display the Key Guide.
3 3.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 3.2.1 Configuring Contrast 1 Press any button on the front of the product to display the Key Guide.
3 3.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. z SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. z SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 3.3.1 Configuring Sharpness 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.4 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. z Not available if Eco Saving is set to On. You can customize the brightness to suit your preferences. 3.4.1 Configuring SAMSUNG MAGIC Bright 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to Picture and press [ ] on the product.
3 3.5 Screen Setup Coarse Adjust the screen frequency. This menu is available in Analog mode only. 3.5.1 Adjusting Coarse 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to Picture and press [ ] on the product. Press [ ] to move to Coarse and press [ ] on the product. The following screen will appear.
3 3.6 Screen Setup Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. 3.6.1 Adjusting Fine 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to Picture and press [ Press [ ] to move to Fine and press [ ] on the product. ] on the product. The following screen will appear.
4 Configuring Tint SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. 4.1 SAMSUNG MAGIC Color SAMSUNG MAGICColor is a new picture-quality improvement technology developed independently by Samsung, which delivers vivid natural colors without picture quality degradation. 4.1.1 Configuring SAMSUNG MAGIC Color 1 Press any button on the front of the product to display the Key Guide.
4 4.2 Configuring Tint Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 4.2.1 Configuring Red 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Red and press [ ] on the product.
4 4.3 Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 4.3.1 Configuring Green 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Green and press [ ] on the product.
4 4.4 Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 4.4.1 Configuring Blue 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Blue and press [ ] on the product.
4 4.5 Configuring Tint Color Tone Adjust the general color tone of the picture. z SAMSUNG This menu is not available when MAGIC Color is in Full or Intelligent mode. 4.5.1 Configuring the Color Tone Settings 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Color Tone and press [ ] on the product.
4 4.6 Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. 4.6.1 Configuring Gamma 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear.
5 5.1 Resizing or Relocating the Screen H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. z Available only when Image Size is set to Screen Fit. z This menu is available in Analog mode only. 5.1.1 Configuring H-Position & V-Position 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.2 Resizing or Relocating the Screen Image Size Change the picture size. 5.2.1 Changing the Image Size 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SIZE&POSITION and press [ Press [ ] to move to Image Size and press [ ] on the product. ] on the product. The following screen will appear.
5 5.3 Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.3.1 Configuring Menu H-Position & Menu V-Position 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SIZE&POSITION and press [ ] on the product.
6 6.1 Setup and Reset Reset Return all the settings for the product to the default factory settings. 6.1.1 Initializing Settings (Reset) 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Reset and press [ ] on the product. ] on the product. The following screen will appear.
6 6.2 Setup and Reset Language Set the menu language. z A change to the language setting will only be applied to the onscreen menu display. z It will not be applied to other functions on your PC. 6.2.1 Changing the Language 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Language and press [ ] on the product. ] on the product.
6 6.3 Setup and Reset Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when MAGIC Bright is in Dynamic Contrast mode. 6.3.1 Configuring Eco Saving 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.4 Setup and Reset Off Timer On/Off You can set the product to automatically turn off. 6.4.1 Configuring Off Timer On/Off 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Off Timer On/Off and press [ ] on the product. The following screen will appear.
6 6.5 Setup and Reset Off Timer Setting The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This menu is available only when Off Timer On/Off is set to On. 6.5.1 Configuring Off Timer Setting 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.6 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. 6.6.1 Configuring PC/AV Mode 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to PC/AV Mode and press [ ] on the product. ] on the product. The following screen will appear.
6 6.7 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.7.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Key Repeat Time and press [ ] on the product. ] on the product. The following screen will appear.
6 6.8 Setup and Reset Customized Key You can customize Customized Key as follows. 6.8.1 Configuring Customized Key 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Customized Key and press [ ] on the product. The following screen will appear.
6 6.9 Setup and Reset Auto Source You can activate Auto Source. 6.9.1 Configuring Auto Source 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Auto Source and press [ ] on the product. ] on the product. The following screen will appear.
6 Setup and Reset 6.10 Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 6.10.1 Configuring Display Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 Setup and Reset 6.11 Menu Transparency Set the transparency for the menu windows: 6.11.1 Changing Menu Transparency 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Menu Transparency and press [ ] on the product. ] on the product. The following screen will appear.
7 7.1 INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear.
8 8.1 Installing the Software Magic Tune 8.1.1 What is MagicTune? MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines. You can adjust the product with the mouse and the keyboard without using the operating buttons of the product. 8.1.2 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the MagicTune setup program.
8 Installing the Software 8.1.3 Removing the Software You can only remove MagicTune™ through [Add or Remove Programs] in Windows. To remove MagicTune™, complete the following steps. 1 Click [Start] select [Settings], and select [Control Panel] from the menu. For Windows XP, click [Start], and select [Control Panel] from the menu. 2 3 4 5 6 Double-click the [Add or Remove Programs] icon in the Control Panel. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.
8 8.2 Installing the Software MultiScreen MultiScreen MultiScreen enables users to use the monitor by partitioning multiple sections. 8.2.1 Installing the Software 1 2 Insert the installation CD into the [CD-ROM drive]. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen" setup file on the [CD-ROM]. 3 4 When the Installation Wizard appears, click [Next].
8 Installing the Software 8.2.2 Removing the Software Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs]. Select "MultiScreen" from the program list and click the [Add/Delete] button.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 70). The images on the screen look distorted. Check the cable connection to the product (Refer to "2.3 Connecting and Using a PC") The screen is not clear. The screen is blurry.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. z Windows XP: Go to Control Panel Themes Display Settings Appearance and Advanced Monitor, and adjust Refresh rate under Monitor settings. z Windows ME/2000: Go to Control Panel Settings Advanced Display Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer z Windows XP: Go to Control Panel Themes z Display Appearance and Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. z Windows Vista: Go to Control Panel Personalization Personalize Appearance and Display Settings, and adjust the resolution.
10 Specifications 10.1 General Model Name S19B150B S24B150BL Size 18.5 Inches (47 cm) 23.6 Inches (59 cm) Display area 409.8 mm (H) x 230.4 mm (V) 521.28 mm (H) x 293.22 mm (V) Horizontal Frequency 30 ~ 81 kHz Vertical Frequency 56 ~ 75 kHz Panel Synchronization Display Color 16.
10 Specifications The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
10 Specifications 10.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a power-saving function.
10 Specifications 10.3 Standard Signal Mode Table z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. z Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications S24B150BL Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ VESA DMT, 640 x 480 31.469 59.940 25.175 -/- MAC, 640 x 480 35.000 66.667 30.240 -/- VESA DMT, 640 x 480 37.861 72.809 31.500 -/- VESA DMT, 640 x 480 37.500 75.000 31.500 -/- VESA DMT, 800 x 600 35.156 56.25 36 +/+ VESA DMT, 800 x 600 37.879 60.317 40.000 +/+ VESA DMT, 800 x 600 48.077 72.188 50.
10 Specifications z Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. z Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA ARGENTINA 0800-333-3733 http://www.samsung.com BRAZIL 0800-124-421 http://www.samsung.
Appendix EUROPE ALBANIA 42 27 5755 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o.
Appendix EUROPE PORTUGAL 808 20-SAMSUNG (808 20 7267) http://www.samsung.com RUMANIA From landline : 08010SAMSUNG (7267864) http://www.samsung.com From landline & mobile : (+40) 21 206 01 10 SERBIA 0700 Samsung (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) http://www.
Appendix CIS UKRAINE 0-800-502-000 http://www.samsung.com/ua http://www.samsung.com/ ua_ru BELARUS 810-800-500-55-500 http://www.samsung.com MOLDOVA 00-800-500-55-500 http://www.samsung.com ASIA PACIFIC AUSTRALIA 1300 362 603 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698-4698 http://www.samsung.com/hk http://www.samsung.com/ hk_en/ INDIA 1800 1100 11 http://www.samsung.
Appendix MIDDlE EAST IRAN 021-8255 http://www.samsung.com OMAN 800-SAMSUNG(726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.samsung.com BAHRAIN 8000-4726 http://www.samsung.com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www.samsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 9200-21230 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA CAMEROON 7095- 0077 http://www.samsung.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1,920 horizontal pixels (horizontal frequency) and 1,080 vertical lines (vertical resolution).
Index A Green 40 Appendix 73 Auto Source 55 I Image Size 45 B INFORMATION 58 Before Connecting 25 Installation 23 Blue 41 Brightness 32 K Key Repeat Time 53 C Checking the Contents 18 Cleaning 8 L Language 48 Coarse 36 Color Tone 42 Connecting and Using a PC 26 Contact SAMSUNG WORLDWIDE 73 Contrast 33 M Menu Transparency 57 MultiScreen 61 Copyright 7 Correct Disposal 79 O Correct posture to use the product 17 Off Timer OnOff 50 Customized Key 54 Off Timer Setting 51 D P Display Time 5
Index Responsibility for the Pay Service (Cost to Customers) 78 S Safety Precautions 10 SAMSUNG MAGIC Bright 35 SAMSUNG MAGIC Color 38 Sharpness 34 Standard Signal Mode Table 70 Index 83
