Quick Guide
Table Of Contents
- English
- Before Reading This User Manual
- Warning! Important Safety Instructions
- 01 TV Installation
- 02 Using Art Mode
- 03 The Samsung Smart Remote
- 04 Initial Setup
- 05 Troubleshooting and Maintenance
- Troubleshooting
- The TV won’t turn on.
- There is no picture/video/sound, or a distorted picture/video/sound from an external device, or “Weak or No Signal” is displayed on the TV, or you cannot find a channel.
- The remote control does not work.
- The cable box or satellite box remote control doesn’t turn the TV on or off or adjust the volume.
- The TV settings are lost after 5 minutes.
- Intermittent Wi-Fi
- Video Apps problems (Youtube etc)
- Precautions when using Art mode
- What is Remote Support?
- Eco Sensor and screen brightness
- Caring for the TV
- Troubleshooting
- 06 Specifications and Other Information
English - 12
Viewing images
Options+
Recents
Art Store My Collection Settings
The image on your TV may differ from the image above depending on the model and geographical area.
To view an image in Art mode, select one of the menus below. To switch to the sub menu where you can select images,
press the Select button, one of the four directional buttons, or
button in Art mode. Then, use the directional buttons
on the remote control to move to desired image, and then press the Select button.
Set appears at the top of the
selected image, and you can view the selected image in Art mode.
Recents
You can manipulate the last selected images.
Art Store
You can go to Art Store to purchase various images.
– The Art Store may not appear depending on the network connection status.
My Collection
You can view a list of artworks and photos that you set as
Favorite in Favorites. You can also select the
desired ones among the images saved on an external storage device or a mobile device and save them in
My Photos.
– In order to fetch the images from your mobile device, the SmartThings app must have been installed in your
mobile device.
Viewing images by time
1. Use the directional buttons on the remote control to move to My Collection.
2. Use the directional buttons to move to Favorite or My Photos.
To view the images on the mobile device connected via the USB or SmartThings app, select the desired images on
the connected device and then save them into My Photos.
3. Use the directional buttons on the remote control to move to Options+ at the top of the screen.
4. Press the Select button when the Start Slideshow item appears.
5. Use the directional buttons on the remote control to select the time that images will be replaced, and then press
the Select button.