Professional PDP Display (PLASMA DISPLAY PANEL) PPM50M7F/PPM63M7F Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS Picture In Picture (PIP) Energy Saving SRS TruSurround XT Digital Natural Image engine Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. ▪ Model _______________ ▪ Serial No. _______________ BN68-01364A-02Eng_1009.
User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP Display) on the plasma PDP Display panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP Display can normally operate only under 2000m(6562 feet) in height.
Contents General Information PC Display User Instructions ............................................. 2 Checking Parts................................................ 4 Control Panel ................................................. 5 Connection Panel............................................ 6 Viewing the Remote Control .......................... 7 Operation Switching Your PDP Display On and Off ......... 8 Installing the Display Vertically........................
Checking Parts Owner’s Instructions Remote Control/ AAA Batteries (Not available in all locations) Power Cord Stand-Base (2EA) / Screws (4EA) (PPM50M7F) Ferrite Cores Power Cord(3301-001110)/ Speaker Wire(3301-001201) PC Cable Warranty Card/ Registration Card/ (Not available in all locations) Sold Separately S-Video Cable Component Cables Audio Cables HDMI/DVI Cable PC Audio Cable HDMI Cable Video Cable Ferrite Core (Speaker Wire, Power Cord) ➢ The ferrite cores are used to shield the cables
Control Panel Front Panel ➢ The product color and shape may vary depending on the model. 1 SOURCE( ) Displays a menu of all of the available input sources (AV, S-Video, Component, PC1, PC2, DVI, and HDMI). In the on-screen menu, use this button as you would use the ENTER button on the remote control. ➢ 2 MENU Press to see the on-screen menu of your PDP Display’s features. 3 4 − VOL + Press to increase or decrease the volume.
Connection Panel Rear Panel 2 3 4 6 5 8 7 0 9 ! PPM50M7F 1 PPM63M7F 2 3 4 5 8 7 6 9 ! 0 1 or or or ➢ The product color and shape may vary depending on the model. ☛ Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the color of the connection terminal to the cable. 1 POWER IN Connect the supplied power cord. 2 EXT SPEAKER (8Ω) Connect external speakers.
Viewing the Remote Control ➢ The performance of the remote control may be affected by bright light. 1 PDP display on 2 Direct channel selection Select to enter the numbers in the Timer.
Installing Batteries in the Remote Control 1 2 3 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. Do not mix battery types, i.e. alkaline and manganese. Replace the cover by aligning it with the base of the remote control and pressing it back into place.
Installing the Display Vertically Samsung shall not be liable for damages caused by installing the product in a different direction from the figure above. You can install the PDP Display vertically. In this case, the fan automatically works. If you wish to stop the fan, position the PDP Display horizontally and then set Fan to Off in the Function menu. Please use a wall attachment panel when installing vertically. The unit must be installed with the menu buttons on the left when viewed from the front.
Rear of the PDP Display 1 Connect the PC cable between the PC IN and PC OUT on the rear of each PDP in the form of daisy chain. 2 Connect the PC cable between the RGB IN on the rear of the last connected PDP and the PC OUT on the rear of the PC. Example for Multiple Display Control connections Rear of the PDP Display ➢ 1 Connect the RS232C cable between the RS-232C IN and RS-232C OUT on the rear of each PDP in the form of daisy chain.
Connecting Speakers ➢ Speakers are optional. You have to purchase the speakers separately. 1 Remove the screws on the rear of the PDP Display. PPM50M7F 2 PPM63M7F Hang the two “T” shaped hangers on the square holes on the rear of the PDP Display. PPM50M7F 3 PPM63M7F Tighten the PDP Display and the speaker bracket using the screws removed from the PDP Display. PPM50M7F PPM63M7F moving your PDP Display, do NOT hold the speaker connected to your PDP Display.
Viewing the Menus 1 2 3 4 5 Press the MENU button. The main menu is displayed on the screen. Its left side has five icons: Picture, Sound, Function, Setup, and Input. Press the ▲ or ▼ button to select one of the icons. Press the ENTER button to access the icon’s sub-menu. Press the ▲ or ▼ button to move to items in the menu. Press the ENTER button to enter items in the menu. Press the ▲/▼/◄/► button to change the selected items. Press the RETURN button to return to the previous menu.
Viewing an External Signal Source You can switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box, and the PDP Display source. 1 2 3 4 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input, then press the ENTER button. Press the ENTER button again to select Source List. Press the ▲ or ▼ button to select the signal source, then press the ENTER button.
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1 2 3 4 Picture Mode : Dynamic Contrast Brightness Sharpness Color G 50 Tint : Cool1 Color Tone Detailed Settings Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ENTER button again to select Mode. Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button.
Making Detailed Picture Settings You can make detailed picture settings. 1 2 3 4 5 6 ➢ ➢ Picture Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ▲ or ▼ button to select Detailed Settings, then press the ENTER button. Select the desired option by pressing the ▲ or ▼ button, then press the ENTER button. Available options: Black Adjust, Dynamic Contrast, Gamma, White Balance, My Color Control, Edge Enhancement, Color Space, xvYCC.
Selecting the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1 2 3 4 Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ▲ or ▼ button to select Size, then press the ENTER button. Select the desired option by pressing the ▲ or ▼ button, then press the ENTER button. Available options: 16 : 9, Wide Zoom, Zoom, 4 : 3, Just Scan 16 : 9: Sets the picture to 16:9 wide mode.
Digital NR / Active Color / DNIe / Movie Plus 1 2 3 4 5 Press the MENU button to display the menu. Press the ENTER button to select Picture. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Available options: Digital NR, Active Color, DNIe, Movie Plus When you are satisfied with your setting, press the ENTER button. Press the EXIT button to exit.
Sound Features 1 2 3 4 5 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Available options: Mode, Equalizer, SRS TS XT, Auto Volume, Internal Mute, Sound Select, Reset When you are satisfied with your setting, press the ENTER button. Press the EXIT button to exit.
Auto Volume: Off/On Each broadcasting station has its own signal conditions, and it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Internal Mute: Off/On If you want to hear the sound through separate speakers, turn the internal mute off. The VOL +, VOL -, S.
Time Features 1 2 3 4 5 6 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button. Select the desired option by pressing the ▲ or ▼ button, then press the ENTER button. Available options: Clock Set, Sleep Timer, Timer1, Timer2, Timer3 When you are satisfied with your setting, press the ENTER button. Press the EXIT button to exit.
Language / Blue Screen / Melody / Energy Saving / HDMI Black Level 1 2 3 4 5 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. When you are satisfied with your setting, press the ENTER button. Press the EXIT button to exit.
Setting the Panel Button Lock This feature allows you to lock the PDP Display panel buttons so that it cannot be operated via the PDP Display panel. It can, however, still be operated via the remote control. Only the remote control can release the panel lock setting, so keep the remote control away from unauthorized users. 1 2 3 4 5 6 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Function, then press the ENTER button. Press the ENTER button again to select Safety Lock.
Setting Up Your Personal ID Number This feature sets viewing restrictions and prevents unauthorized access to your PDP Display through a PIN (Personal Identification Number), which is a 4 digit number. 1 2 3 4 5 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Function, then press the ENTER button. Press the ENTER button again to select Safety Lock. Press the ▲ or ▼ button to select Change PIN, then press the ENTER button.
Setting the MDC (Multiple Display Control) This function enables you to easily control the connected PDP Displays from a PC by specifying IDs to connected PDP Displays. 1 2 3 4 5 6 ➢ ➢ ➢ Press the MENU button to display the menu. Press the ▲ or ▼ button to select Function, then press the ENTER button. Press the ▲ or ▼ button to select Multi Control, then press the ENTER button. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Setting the Multiple Screen You can get various display effects with many PDPs. 1 2 3 4 5 6 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Function, then press the ENTER button. Press the ▲ or ▼ button to select Video Wall, then press the ENTER button. Press the ENTER button again. Press the ▲ or ▼ button to select On, then press the ENTER button. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Selecting the Fan Fans inside the PDP Display are used to lower the temperature of the tops and the front of the PDP Display. To reduce the noise of the fan, you may stop the fan by setting the Fan to “Off”. The temperature of the top and the front of the PDP Display may increase when you watch the PDP Display for a long period of time while the fan is stopped, but the PDP Display will operate normally.
Using the Game Mode When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting game menu. 1 2 3 4 5 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Game Mode, then press the ENTER button. Select Off or On by pressing the ▲ or ▼ button, then press the ENTER button. Press the EXIT button to exit.
Viewing the Picture in Picture (PIP) You can display a sub (PIP) picture within the main picture from external A/V devices. In this way you can display the video input from any connected device while monitoring other video inputs. 1 2 3 4 5 6 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select PIP, then press the ENTER button. Select the desired option by pressing the ▲ or ▼ button, then press the ENTER button.
Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. 1 2 3 4 5 6 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button.
To remove after-images on the screen, use either the All White, Inverse or Signal Pattern function. ➢ Although both of the three functions remove after images on the screen, Signal Pattern is more effective. after image removal function has to be executed for a long time (approximately 1 hour) to ➢ The effectively remove after images on the screen. If after-images are not removed after the execution of the function, repeat the function again.
Setting up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported) D-Sub/DVI Input Resolution 640X350 720X400 640X480 640X480 640X480 640X480 800X600 800X600 800X600 800X60 1024X768 1024X768 1024x768 1024X768 1152X864 1280x960 1280x960 1280X1024 1280X1024 1280X1024 1280X1024 1600X1200 1920x1080P Horizontal Frequency (kHz) 31.5 31.5 31.5 37.9 37.5 43.3 37.
Setting the PC the PDP Display to the PC mode by pressing the SOURCE ➢ Set button. 1 2 3 4 5 6 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select PC, then press the ENTER button. Select the desired option by pressing the ▲ or ▼ button, then press the ENTER button. Available options: Image Lock, Position, Auto Adjustment, Image Reset, Zoom When you are satisfied with your setting, press the ENTER button.
Setting the Home Theatre PC the PDP Display to the PC mode by pressing the ➢ Set SOURCE button. Setup Screen Burn Protection Language : English Time Game Mode : Off Blue Screen : Off Melody : Off PC Home Theatre PC : Off You can view higher quality pictures by configuring the screen settings in PC Mode. If you set the Home Theatre PC function to On, you can configure the Detailed Settings (when Picture Mode is set to Standard or Movie) in PC Mode.
standard dimensions for wall mount kits are shown in the table. ➢ The When purchasing our wall mount kit, a detailed installation manual and all parts necessary for ➢ assembly are provided. Do not use screws longer than the standard dimension, as they may cause damage to the inside of ➢ the PDP Display set. wall mounts that do not comply with the VESA standard screw specifications, the length of the ➢ For screws may differ depending on their specifications.
Troubleshooting Before contacting a Samsung service center, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the PDP Display and contact Samsung at 1-800-634-8770. No sound or picture Check that the power cord has been connected to a wall socket. Check that you have pressed the (Power) button (On/Off) on the front panel or press the ON button on the remote control. Check the picture contrast and brightness settings.
Specifications Model Name Screen Size (Diagonal) PPM50M7F PPM63M7F 50 inches 63 inches PC Resolution 1920 x 1080 @ 60 Hz Sound (Output) 10 W + 10 W Dimensions (WxHxD) Body With stand Weight Body With stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity ➢ 1204.6 x 724.1 x 97.1 mm(47.4 x 28.5 x 3.8 inches) 1204.6 x 772.5 x 362.0 mm(47.4 x 30.4 x 14.3 inches) 1502.7 x 893.1 x 99.0 mm(59.2 x 35.2 x 3.9 inches) 1502.7 x 942.3 x 341.1 mm(59.
This page is intentionally left blank. BN68-01364A-02Eng_1009.
This page is intentionally left blank. BN68-01364A-02Eng_1009.
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Communiquez avec SAMSUNG WORLD-WIDE Pour toute question ou commentaire se rapportant aux produits Samsung, veuillez communiquer avec le centre de service à la clientèle SAMSUNG. Contacte con SAMSUNG WORLD-WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.