Installation manual

CHAPTER 3. Specification of OfficeServ 7400
3-2 © SAMSUNG Electronics Co., Ltd.
Table 3.1 OfficeServ 7400 Capacity (Continued)
System Configuration Maximum Line Capacity
Basic chassis + Expansion
chassis1
When using the E1: 240
When using the 8TRK: 168
When using the station: 336
When using the internal power of PLIM/PLIM2: 96
When using the VDSL: 40
When using the WLAN terminal: 128
When using the IP phone: 480
- RCM2: Up to 4 per R2 (8) or CID (14) system
R2 (4)/CID (6) (Both station and trunk lines are supported.)
- CRM: Up to 4 per R2 (16), or CID (16) system
- GWIMT: 1
- GSIM or GSIMT: 4
- GPLIMT: 21
(Use OS7150 power supplier, if necessary)
Basic chassis + Expansion
chassis1 Expansion
chassis2
When using the E1: 240
When using the 8TRK: 240
When using the station: 480
When using the internal power of PLIM/PLIM2: 144
When using the VDSL: 60
When using the WLAN terminal: 128
When using the IP phone: 480
- RCM2: Up to 6 per R2 (8) or CID (14) system
R2 (4)/CID (6) (Both station and trunk lines are supported.)
- CRM: Up to 6 per R2 (16), or CID (16) system
- GWIMT: 1
- GSIM or GSIMT: 6
- GPLIMT: 32
(Use OS7150 power supplier, if necessary)