Installation manual

OfficeServ 7400 System Description
© SAMSUNG Electronics Co., Ltd. 3-1
CHAPTER 3. Specification of
OfficeServ 7400
This chapter describes the capacity of the OfficeServ 7400, various signal specification,
power specification, rings and tones, compatible modules and terminals, and equipment
specifications.
3.1 System Capacity
Up to 720 lines can be installed and operated in the OfficeServ 7400 system, and the line
ratio of the station and trunk line can be adjusted within the capacity depending on the
users’ needs. Table 3.1 below shows the maximum line capacity of the OfficeServ 7400:
Table 3.1 OfficeServ 7400 Capacity
System Configuration Maximum Line Capacity
Basic chassis When using the E1: 240
When using the 8TRK: 80
When using the station: 160
When using the internal power of PLIM: 48
When using the VDSL: 20
When using the WLAN terminal: 128
When using the IP phone: 480
- SVMi-20E: one per 12 (20) systems
- RCM2: Up to 2 per R2 (8) or CID (14) system
R2 (4)/CID (6) (Both station and trunk lines are supported.)
- CRM: Up to 2 per R2 (16), or CID (16) system
- GWIMT: 1
- GSIM or GSIMT: 2
- GPLIMT: 10
(Use OS7150 power supplier, if necessary)