Installation manual

CHAPTER 2. Hardware of OfficeServ 7400
2-42 © SAMSUNG Electronics Co., Ltd.
Front View of CNF24
The front view of the CNF24 is shown in the figure below:
Figure 2.33 Front View of the CNF24
The components on the front panel of the CNF24 have the functions below:
Table 2.36 Ports and LEDs of the CNF24
Ports, LEDs Functions
LAN Port that connects the Ethernet.
SIO UART port (for tests).
RST Button for resetting the CNF24.
RUN LED This LED indicates CNF24 status.
- Off: Power is not being supplied.
- On: Booting.
- Blink: The RAM program is operating.
SVC LED This LED indicates if the CNF24 service is being offered.
- This LED turns on when the CNF24 software task can be serviced.
LAN LED This LED indicates the status of the Ethernet link
- Red: Linked as 10 BASE-T Ethernet mode
- Red blink: Transmitting/receiving data as 10 BASE-T
- Green: Linked as 100 BASE-TX Ethernet mode
- Green blink: Transmitting/receiving data as 100 BASE-T
- Orange: Linked as 1000 BASE-TX Ethernet mode
- Orange blink: Transmitting/receiving data as 1000 BASE-TX
- Off: Link off
MC LED
CONF LED This LED indicates the number of the conference channel
- Green: 1 ~ 8 channels conferencing
- Orange: 9 ~ 16 channels conferencing
- Red: 17 ~ 24 channels conferencing
- Off: No conference
RST
CNF24
LAN
SIO
RUN SVC
LAN
CONF
MC
REC MEM BACKUP