Installation manual

OfficeServ 7400 System Description

The components on the front panel of GPLIMT functions as follows:

Table 2.23 Ports and LEDs of GPLIMT

Ports, LED Function Description

P1~P12 Ports for connecting to 10/100BASE-T Ethernet

P13, P14 Ports for connecting to 10/100/1000 BASE-TX Gigabit Ethernet (GbE)

Left LEDs of P1~P6 First LED: Link operation of P1~P6

- On: LED turns green when a link is in operation

- Blink: Each port blinks on active status

Second LED: 10/100 BASE-T operation of P1~P6

- Off: Operated in 10 BASE-T

- On: Operated in 100 BASE-TX

Right LEDs of P1~P6 First LED: Link operation of P7~P12

- On: LED turns green when a link is in operation

- Blink: Each port blinks on active status

Second LED: 10/100 BASE-T operation of P7~P12

- Off: Operated in 10 BASE-T

- On: Operated in 100 BASE-TX

LNK LED LED turns on when P13~P14, which are Giga ports, is connected

Blinking when the relevant port is active.

SPD LED 10/100/1000 BASE-T operation of P13~P14, which are Giga ports.

- Off: Operating in 10 BASE-T

- On: Operating in 100 BASE-TX

- Blinking: Operating in 1000 BASE-TX

RST Button for resetting GPLIMT