Installation manual

OfficeServ 7400 System Description
© SAMSUNG Electronics Co., Ltd. 2-29
Front View
The front view of the PLIM2 data board is shown in the figure below.
Figure 2.21 Front View of the PLIM2 Board
The components on the front panel of the PLIM2 board have the functions below:
Table 2.21 Ports and LEDs of the PLIM2 Board
Port, LED Function Description
P1~P16 Port that connects to the Ethernet
Left LED of P1~P4, P9~P12 First LED: Indicates if the P1~P4, P9~P12's link is operating
- On: When the link is operating, LED is turned on into green color
- Blink: When each port is active, the LED is blinking
Second LED: Indicates whether the P1~P4, P9~P12 are operating in
10/100 BASE-T mode
- Off: In operation as 10 BASE-T
- On: In operation as 100 BASE-TX
Right LED of P1~P4, P9~P12 First LED: Indicates if the P5~P8, P13~P16's link is operating
- On: When the link is operating, LED is turned on into green color
- Blink: When each port is active, the LED is blinking
Second LED: Indicates whether the P5~P8, P13~P16 are operating in
10/100 BASE-T mode
- Off: In operation as 10 BASE-T
- On: In operation as 100 BASE-TX
PLIM2
P1
P5
P2
P6
P3
P7
P4
P8
P9
P13
P10
P14
P11
P15
P12
P16