Installation manual

OfficeServ 7400 System Description
© SAMSUNG Electronics Co., Ltd. 1-3
1.1.2 System Architecture
OfficeServ 7400 is configured with the basic chassis and expansion chassis mounted on the
19-inch rack as well as OfficeServ feature server mounted on the external Linux server.
The Main Control Processor 40 (MP40) module, which is the main control part, is installed
into the basic chassis and manages the entire OfficeServ 7400. The Line Control Processor
40 (LP 40), which is the sub-control part, is installed into the basic/expansion chassis,
controls modules and sends/receives data to/from the MP40. The other components are
modules, the power supply, and a fan.
OfficeServ 7400 is consisted of 5 categories.
y Call Server: Module to do voice service such as MP 40, LP 40, DLI, SLI, Trunk
y Data Server: Module to do data service such as GSIM, PLIM,LIM
y Feature Server: Linux application to do voice service in IP such as OfficeServ IP-UMS
y OfficeServ Admin: PC application to manage Call Server such as OfficeServ Easyset,
WebMMC
y OfficeServ Solution: PC application to manage high-class voice services that be linked
with Call Server such as OfficeServ Call, Operator
The service configuration diagram of the OfficeServ 7400 system is shown in the figure below:
Figure 1.1 Configuration of OfficeServ 7400 Service
Mobile station
(SMT-W5100)
AP (SMT-R2000)
Laptop
LP40 16DLI2
16MWSLI
MP40
8TRK PLIMT
TEPRI2 GWIMT
GPLIM
T
LIM
8COMBO2
MGI64
ISDN
PRI/BRI
OfficeServ 7400
LAN
T1/E1
WAN
xDSL Modem
DSU/CSU
OfficeServ Admin
- OfficeServ Manager
- OfficeServ EasySet
OfficeServ Solution
- OfficeServ Operator
- OfficeServ Call
- OfficeServ News
IP Phone
…
Basic
Chassis
xDSL Line
Private Line
PSTN
AP (SMT-R2000)
WLAN