User Manual

Table Of Contents
English 41
Maintaining your appliance
How to run a self-cleaning cycle
1. Select the length of time for the self-cleaning operation, eg. 3 hours.
Press Self Clean once for a 3 hour clean time, twice for a 5 hour clean time, or
3 times for a 2 hour clean time.
The default setting is 3 hours.
2. Press START/SET. The motor-driven door lock will engage automatically.
You will not be able to start a self-cleaning cycle if the control lockout
feature is activated or if the oven’s temperature is too hot.
The oven door locks automatically. The display will show the clean time
remaining. You will not be able to open the oven door until the self-
cleaning operation is complete and the temperature drops to a safe/cool
temperature.
The self-cleaning feature will not operate when the warming center is on.
3. When the self-cleaning cycle is done, “End” will appear in the display and the
range will beep several times.
How to delay the start of self-cleaning
1. Select the desired self-clean time by pressing Self Clean. (See Step 1 above.)
2. Press Delay Start.
3. Enter the time you want the clean cycle to start. You can change AM/PM to
press Delay Start.
4. Press START/SET. The display will show Delay Start, Self clean, and the Lock
icon. The motor-driven door lock will engage automatically.
5. The Self-Cleaning cycle will turn on automatically at the set time.
How to turn off the self-cleaning feature
You may nd it necessary to stop or interrupt a self-cleaning cycle due to smoke in
the oven.
1. Press OVEN OFF.
2. You will be able to open the oven door once the oven has cooled for
approximately 1 hour.
After a self-cleaning cycle
You may notice some white ash in the oven. Wipe it up with a damp cloth
after the oven cools. (If white spots remain, remove them with a soap-lled
steel wool pad and rinse thoroughly with a vinegar and water mixture.)
If the oven is not clean after one cycle, repeat the cycle.
You cannot set the oven for cooking until the oven is cool enough for the door
to unlock.