Product manual

03 Functions
GIGA MODE Function
The GIGA MODE function amplifies the bass
sound and provides twice the bass for powerful,
realistic sound.
1. Press the GIGA SOUND BLAST button
on the main unit or the GIGA button on the
remote control. Each time you press this
button, the mode changes as follows:
GIGA SOUND BLAST
;
OFF-GIGA SOUND
2. To cancel this function, press the GIGA
button until “OFF-GIGA SOUND” is
displayed.
| NOTE |
✎
If you connect a microphone, press the GIGA
button and the product will display " NOT
SUPPORTED".
NON-STOP RELAY Function
The NON-STOP RELAY function plays music
continuously without an interval between tracks/
files. For example, for two successive mp3 files,
the function skips to a position 10 seconds after
the start of the second file when there are 10
seconds of playing time left in the first file.
Press the NON-STOP RELAY button on the
remote control.
Each time you press this button, the mode
changes as follows:
ON-NON-STOP MUSIC RELAY
;
OFF-NON-
STOP MUSIC RELAY
| NOTE |
✎
This function is only available during playback
of a CD/USB.
Software update
Samsung may offer updates for the product's sys-
tem firmware in the future.
If an update is offered, you can update the firmware
by connecting a USB device with the firmware
update stored on it to the USB port on your product.
Note that if there are multiple update files, you must
load them onto the USB device singly and use them
to update the firmware one file at a time.
Please visit samsung.com or contact the Samsung
Call Center to receive more information about down-
loading updates files.
• Select USB function, insert a USB device
containing the firmware update into the USB port
on the main unit.
• Updating firmware may not work properly if audio
files supported by the product are stored in the
USB storage device.
• Do not disconnect the power or remove the USB
device while updates are being applied. The main
unit will turn off automatically after completing the
firmware update.
• After the update, all settings are reset to their
factory default settings. We recommend you write
down your settings so that you can easily reset
them after the update.
If the firmware fails to update, we recommend
formatting the USB device in FAT16/FAT32 and
trying again.
• Once the software update is completed, turn on
the product with no disc inserted. The “NO DISC”
message appears on the display. Press and hold
the STOP button on the main unit for longer than
5 seconds. “INIT ” appears on the display and the
unit powers off. The upgrade is complete.
• Do not format the USB device in the NTFS format.
The product does not support the NTFS file
system.
• Depending on the manufacturer, some USB
devices may not be supported.
• The product has a DUAL BOOT function. If the
firmware fails to update, most functions will
become inoperable and "UPGRADE FIRMWARE"
will appear on the display. Update the firmware
again.
27 English
02793J-MX-JS5000-ZP-ENG-20150205.indd 27 2015/3/20 11:23:31