Product manual

Functions
Listening to the Radio
To Store the Stations You Want
You can store up to 15 FM stations
,
15 AM stations.
1.
Select FM or AM by pressing the TUNER
button.
2.
To search for a station, press the TUNING
MODE button on the remote control or the
STOP button on the product one or more times
until MANUAL is displayed.
3. Select a station by:
• Pressing and holding the TUNING
1
,
2
button on the remote control to
automatically search for active broadcasting
stations.
4. Press the MO/ST button to switch between
stereo and mono.
• In a poor reception area, select MONO for
a clear, interference-free broadcast.
• This applies only when listening to an FM
station.
5. If you do not want to store the radio station
found, go back to Step 3 and search for
another station.
Otherwise:
a. Press the MEMORY button.
• FM followed by a flashing number appears in
the display. That number is the current preset
number.
b. Press the
1
,
2
button or the
,
,
.
buttons to scroll through and select a
preset number.
c. Press the
¬
button to save the preset.
• You can select a number from 1 to 15.
6. To store additional radio stations, repeat Steps
3 to 5.
| NOTES |
✎
In Tuner mode
- In the Manual mode, you can use the
1
or
2
button to change stations.
- In the Preset mode, you can use the
1
or
2
button to search for a stored radio
station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1. Select FM or AM by pressing the TUNER
button on the product or remote control.
2. Press the TUNING MODE button on the
remote control until “PRESET” is displayed.
3. Press
1
,
2
button on the main unit or
TUNING
1
,
2
on the remote control to
select a preset number.
Timer Function
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Press the TIMER SET button on the remote
control twice. "CLOCK " is displayed.
2. Press the
¬
button on the remote control.
The hour flashes.
• T
o increase the hours:
,
• To decrease the hours:
.
3. When the correct hour is displayed, press the
¬
button, and then the minutes flash.
• To increase the minutes:
,
• To decrease the minutes:
.
4. When the correct minute is displayed, press
the
¬
button, and then " TIME" appears in
the display.
Setting the Timer
The timer enables you to set the product to switch
on or off at specific times automatically.
• Before setting the timer, confirm that the current
time is correct.
• For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
• If you no longer want the product to be
switched on or off automatically, you cancel the
timer by pressing the TIMER ON/OFF button.
22 English
02793J-MX-JS5000-ZP-ENG-20150205.indd 22 2015/3/20 11:23:30