Operation Manual
Table Of Contents
- Safety Warnings
- Accessories
- Precautions
- Cautions on Handling and Storing Discs
- Disc Types And Disc Format
- Contents
- Description
- Attaching the toroidal ferrite core to the Power cable (optional)
- Display Function
- CD/MP3/WMA-CD Playback
- Selecting a Track
- Searching for a Specific Music Passage on a CD
- Repeat One or All Tracks on a Compact Disc
- 10 Skip Function
- CD Programming
- Checking or Editing the Programmed Tracks
- Auto Change Function
- Playing a USB Device
- Using Bluetooth
- Setting the Clock
- Timer Function
- Cancelling the Timer
- Listening to Radio
- Selecting a Stored Station
- Recording Function
- Recording Speed
- Selecting EQ Mode
- Selecting LOCAL EQ Mode
- Using the FOOTBALL MODE
- GIGA SOUND Function
- Connecting a Microphone
- Troubleshooting
- Specifications
16 English
English 16
English 17
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the unit,
disconnect the power cord, and contact the nearest authorized dealer or Samsung
Electronics Service Center.
Symptom Check/Remedy
I cannot eject the disc.
•Isthepowercordpluggedsecurelyintotheoutlet?
•Turnoffthepowerandthenturnitbackon.
Playback does not start
immediately when the
Play/Pause button is pressed.
•Areyouusingadeformeddiscoradiscwithscratchesonthesurface?
•Wipethediscclean.
No sound.
•Theunitdoesnotproducesoundduringfastplaybackandslow
playback.
•Arethespeakersconnectedproperly?
•Isthediscseverelydamaged?
The remote control does not
work.
•Istheremotecontrolbeingoperatedwithinitsoperationalangleand
distance range?
•Arethebatteriesdrained?
•Theproductisnotworking.
(Example: The power goes out or
the front panel key doesn't work
or you hear a strange noise.)
•Theproductisnotworking
normally.
•Reset the unit: With no disc inserted and the “NO DISC” message on
the display of the product, press and hold the
STOP (@)
button on the
main unit for longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio broadcast.
•Istheantennaconnectedproperly?
•Iftheantenna'sinputsignalisweak,installanexternalFMantennainan
area with good reception.