FULL MANUAL HW-A55C Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
SAFETY INFORMATION WARNING •• The following also applies to the Wireless Subwoofer (PS-WR45BB). •• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. •• To prevent injury, this apparatus must be SAFETY WARNINGS securely attached to the floor/wall in TO REDUCE THE RISK OF ELECTRIC SHOCK, DO accordance with the installation instructions. NOT REMOVE THE COVER (OR BACK). •• This product contains chemicals known to the NO USER-SERVICEABLE PARTS ARE INSIDE.
FCC Caution : FCC Radiation Exposure Statement : •• Any changes or modifications not expressly This equipment complies with FCC radiation approved by the party responsible for exposure limits set forth for an uncontrolled compliance could void the user’s authority to environment. This equipment should be installed operate this equipment. and operated so there is at least 8 inches (20 cm) •• This product satisfies FCC regulations when between the radiator and your body.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
ABOUT THIS MANUAL The user manual has two parts: simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsung’s on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsung’s website. (http://www.samsung.
CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control (AA batteries X 2) 02 03 04 05 06 2 -------------------------- Product Overview 2 3 Front Panel / Top Panel of the Soundbar -------------------------- 3 Bottom Panel of the Soundbar -------------------------- 4 Connecting the Soundbar 5 Connecting Electrical Power -------------------------- 5 Connecting the Soundbar to the Subwoofer –– Automatic connection between the Subwoofer and the Soundbar –– M
07 Connecting a Mobile Device Connecting via Bluetooth 08 09 19 -------------------------- 19 Using the Remote Control 23 How to Use the Remote Control -------------------------- 23 Adjusting the Soundbar volume with a TV remote control -------------------------- 26 Using the Hidden Buttons (Buttons with more than one function) -------------------------- 27 Output specifications for the different sound effect modes -------------------------- 27 Installing the Wall Mount 28 Installation Prec
01 CHECKING THE COMPONENTS PAIR SOUND MODE VOL WOOFER SOUNDBAR Soundbar Main Unit Subwoofer Remote Control (AH81-09784A) / Batteries AC/DC Adapter (Soundbar) (AH81-09783A) HDMI Cable (AH81-11233A) x2 Power Cord (Subwoofer, Soundbar) (AH81-09826A) x2 Wall Mount Guide (AH81-09822A) Holder-Screw (AH81-09824A) x2 x2 (M4 x L10) Bracket-Wall Mount (AH81-09823A) Screw (AH81-09825A) •• For more information about the power supply and power consumption, refer to the label attached to the product.
02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar Position the product so that the SAMSUNG logo is located on the top. Top Panel Display Displays the product’s status and current mode. (Power) Button Turns the power on and off. •• Auto Power Down Function The unit turns off automatically in the following situations: –– In D.IN / HDMI / BT / USB Mode : If there is no audio signal for 20 minutes. (Volume) Button Adjusts the volume.
HDMI Bottom Panel of the Soundbar USB (5V 0.5A) HDMI TO TV HDMI HDMI (ARC) USB 0.5A) USB (5V(5V 0.5A) HDMI TO TO TV HDMI DIGITALAUDIO AUDIOIN IN(OPTICAL) (OPTICAL) DIGITAL (ARC) (ARC) DIGITAL AUDIO IN (OPTICAL) DC 24V 24V DCDC 24V HDMI USB (5V 0.5A) HDMI TO TV (ARC) HDMI DC 24V DIGITAL AUDIO IN (OPTICAL) HDMI HDMI TO TV (ARC) USB (5V 0.5A) USB (5V 0.5A) DC 24V HDMI IN TO(OPTICAL) TV DIGITAL AUDIO (ARC) DC 24V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order: 1. Connect the power cord to the Subwoofer. 2. Connect the power output cable to the power adapter, and then to the Soundbar. 3. Connect the power cord to a wall socket. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicator at the rear of the subwoofer turn on.
Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. •• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Rear of Subwoofer 2.
NOTES •• Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. •• Before moving or installing this product, be sure to turn off the power and disconnect the power cord. •• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking blue several times. •• If you use a device that uses the same frequency (5.
Connecting an SWA-9100S (Sold Separately) to your Soundbar Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-9100S, sold separately) to your Soundbar. 1. Connect the Wireless Receiver Module to 2 Surround Speakers. –– When connecting the speaker cable, connect the core wire to the speaker. SURROUND-RIGHT SURROUND-RIGHT –– The speaker cables are color coded.
3. Press and hold the Up button on the remote control for at least 5 seconds. •• The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. •• The Soundbar will automatically power on when ID SET is complete. PAIR 5 Sec SAMSUNG logo is on the top ID SET ND SOUODE M CAUTION •• If your Soundbar was playing music when it connects to the SWA-9100S, you may hear some stuttering from the woofer as the connection finalizes. 4.
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. –– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1.
•• If TV sound is inaudible, press the (Source) button on the remote control or on the top of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played. •• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable is connected to the correct port. •• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.
Connecting using an Optical Cable Pre-connection Checklist •• When both the HDMI cable and optical cable are connected, the HDMI signal is received first. •• When you use an optical cable and the terminals have covers, be sure to remove the covers. Bottom of the Soundbar Optical Cable (not supplied) DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Top of the Soundbar D.IN 1.
Method 2. Connecting Wirelessly Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• Only one TV can be connected at a time. PAIR OR ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”.
Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but “BT”. •• Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) •• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the Left button on the remote control for 5 seconds with the Soundbar in “BT READY” status.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired connection or Bluetooth connection to play the external device’s sound through the Soundbar. Connecting using an HDMI Cable Bottom of the Soundbar HDMI OUT External Device HDMI HDMI Cable HDMI TO TV (ARC) HDMI IN (ARC) HDMI Cable DIGITAL AUDIO IN (OPTICAL) Top of the Soundbar HDMI 1. Connect an HDMI cable from the HDMI port on the back of the product to the HDMI OUT port on your digital device. 2.
Connecting using an Optical Cable HDMI TO TV Bottom of the(ARC) Soundbar Optical Cable (not supplied) DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT BD / DVD player / Top of the Soundbar Set-top box / Game console D.IN 1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT port of the Source Device using a digital Optical Cable (not supplied). 2. Select “D.IN” mode by pressing the (Source) button on the top panel or on the remote control.
06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. USB port HDMI USB (5V 0.5A) HDMI TO TV (ARC) DC 24V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) USB 1. Connect the USB device to the USB port on the bottom of the product. 2. Press the (Source) button on the top panel or on the remote control, and then select “USB”. 3. “USB” appears in the display screen. 4. Play music files from the USB storage device through the Soundbar.
07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• The connection is limited to one TV or two Bluetooth devices at the same time. PAIR OR Bluetooth device ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”.
What is the difference between BT READY and BT PAIRING? •• BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. •• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the on the remote control or press and hold the PAIR button (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. •• The Soundbar will be disconnected. •• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the top panel or on the remote control, and then change to any mode except “BT”.
Bluetooth Multi connection The Soundbar can be connected to 2 Bluetooth devices at the same time. Bluetooth device A Bluetooth device B 1. Connect the Soundbar to up to two Bluetooth devices. (See page 19) 2. Play music from one of the connected Bluetooth devices while two devices are connected. 3. If music is played from the Bluetooth device “B” while playing from the device “A”, the music is started playing on the device “B” and automatically being stopped/paused playback on the device “A”. 4.
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power PAIR Press to select a source connected to the Soundbar. Source Press the (Mute) button to mute the sound. Press it again PAIR to unmute the sound. SOUND MODE PAIR Mute SOUND MODE Press to cycle through the available sound modes: SOUND MODE SOUND MODE VOL WOOFER PAIR VOL SOUNDBAR SOUND MODEVOL SURROUND SOUND, GAME, ADAPTIVE, DTS VIRTUAL:X, or STANDARD.
•• DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the SOUND MODE button for more than 5 seconds while the Soundbar is powered off to turn DRC (Dynamic Range Control) on or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.) •• Bluetooth Power This feature automatically turns the Soundbar on when it receives a connection request from a previously connected TV or Bluetooth device. The setting is On by default.
When pressed, the settings TREBLE, BASS, and AUDIO SYNC are displayed in sequence. The desired settings can be adjusted using the Up/Down buttons. •• To control the volume of the treble or bass sound, press the (Sound Control) button Sound Control to select TREBLE or BASS and then adjust the volume between -6~+6 by using the Up/ Down buttons. (Make sure the Sound mode is set to “STANDARD”.) •• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band.
Adjusting the Soundbar volume with a TV remote control Adjust the Soundbar volume using the TV’s remote control. •• This function can be used with IR remote controls only. Bluetooth remote controls (remote controls that require pairing) are not supported. •• Set the TV speaker to External Speaker to use this function. •• Manufacturers supporting this function: VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1. Turn Off the Soundbar. 2. Push up and hold the WOOFER button for 5 seconds.
Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function WOOFER (Up) TV remote control On/Off (Standby) page 26 Left TV Auto connect On/Off (BT Ready) page 15 Up ID SET page 24 7 Band EQ page 25 DRC ON/OFF (Standby) page 24 Bluetooth Power page 24 (Sound Control) SOUND MODE Output specifications for the different sound effect modes Output Effect SURROUND SOUND Bluetooth POWER Surround SOUND MODE GAME ADAPTIVE SOUND M
09 INSTALLING THE WALL MOUNT Wallmount Components Wall Mount Guide (AH81-09822A) Installation Precautions x2 x2 •• Install on a vertical wall only. •• Do not install in a place with high temperature or humidity. •• Verify whether the wall is strong enough to (M4 x L10) Holder-Screw Screw (AH81-09824A) (AH81-09825A) support the product’s weight. If not, reinforce x2 the wall or choose another installation point.
2. Align the Wall Mount Guide’s Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. •• If you are not mounting below a TV, place the Center Line in the center of the installation area. 6.
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 10 PLACING THE SOUNDBAR ON A TV STAND Place the Soundbar on a TV stand. 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws. •• Insert the Holder-Screws into the wide (bottom) part of the Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts down so that the Bracket-Wall Mounts rest securely on the 1.
11 SOFTWARE UPDATE Update Procedure After the update completes, all your customized user settings are maintained. 1. Connect a USB thumb drive to the USB port on your computer. Samsung may offer updates for the Soundbar’s Important: Make sure there are no music system firmware in the future. files on the USB thumb drive. This may cause USB port the firmware update to fail. 2. Go to https://www.samsung.com/us/ HDMI USB (5V 0.
If UPDATE is not displayed Reset 1. Turn off the Soundbar, disconnect and then Top of the Soundbar reconnect the USB storage device that contains the update files to the Soundbar’s USB port. 2. Disconnect the Soundbar’s power cord, reconnect it, and then turn on the Soundbar. INIT OK NOTES •• The firmware update may not work properly if audio files supported by the Soundbar are stored in the USB storage device. •• Do not disconnect the power or remove the USB device while updates are being applied.
12 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). Soundbar does not turn on. Subwoofer does not output any sound. ;; Check whether the power cord of the Soundbar is correctly inserted into the outlet.
There is no sound in when connecting to the TV in HDMI TO TV (ARC) mode. Sound drops out when connected via Bluetooth. ;; Your device is unable to play the input signal. Change the TV’s audio output to PCM or Dolby Digital. (For a Samsung TV: Home ( ) → Settings ( ) → Sound → Expert Settings → Digital Output Audio Format) ;; Some devices can cause radio interference if they are located too close to the Soundbar. e. g. microwaves, wireless routers, etc.
13 LICENSE Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. (for companies headquartered in the U.S./Japan/ Taiwan) or under license from DTS Licensing Limited (for all other companies). DTS, Digital Surround, Virtual:X, and the DTS logo are registered trademarks or trademarks of DTS, Inc.
14 OPEN SOURCE LICENSE NOTICE To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com) 15 IMPORTANT NOTES ABOUT SERVICE •• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. •• An administration fee may be charged if either: a. An engineer is called out to your home at your request and there is no defect in the product. b.
16 SPECIFICATIONS AND GUIDE Specifications Model Name HW-A55C USB 5V/0.5A Weight 6.8 lbs (3.1 kg) 38.6 x 2.3 x 4.1 inches Dimensions (W x H x D) (980.0 x 58.0 x 105.0 mm) Operating Temperature Range +41°F to +95°F (+5°C to +35°C) Operating Humidity Range 10 % ~ 75 % AMPLIFIER Rated Output power Supported play formats 180W (30W x 6) Dolby Audio™ (supporting Dolby® Digital), DTS, DTS Virtual:X, PCM 2ch Subwoofer Name PS-WR45BB Weight 8.8 lbs (4.0 kg) 7.1 x 13.5 x 10.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.
QUESTIONS OR COMMENTS? Country IN THE US Samsung Service Center 1-800-SAMSUNG (726-7864) Web Site Address www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 © 2021 Samsung Electronics Co., Ltd. All rights reserved.