USER MANUAL HW-M4500
SAFETY INFORMATION WARNING •• The following also applies to the Wireless Subwoofer (PS-WM20). •• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. •• To prevent injury, this apparatus must be SAFETY WARNINGS securely attached to the floor/wall in TO REDUCE THE RISK OF ELECTRIC SHOCK, DO accordance with the installation instructions. NOT REMOVE THE COVER (OR BACK). •• This product contains chemicals known to the NO USER-SERVICEABLE PARTS ARE INSIDE.
Important Safety Instructions •• Reorienting or relocating the receiving antenna. Read these operating instructions carefully •• Increasing the separation between the before using the unit. Follow all the safety equipment and receiver. •• Connecting the equipment to an outlet that is on a different circuit than the radio or TV. instructions listed below. Keep these operating instructions handy for future reference. 1. Read these instructions. •• Consulting the dealer or an experienced 2.
12. Use only with the cart, stand, 3. Do not expose the unit to direct sunlight or tripod, bracket, or table other heat sources. This could lead to specified by the manufacturer, overheating and cause the unit to or sold with the apparatus. malfunction. When a cart is used, use caution when 4. Protect the product from moisture (i.e. moving the cart/apparatus combination to vases), and excess heat (e.g. a fireplace) or avoid injury from tip-over. equipment creating strong magnetic or 13.
ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the Full Manual on Samsung’s on-line customer support center by scanning the QR code. To see the manual on your PC or mobile device, download the manual in document format from the website. (http://www.samsung.
CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control (AA batteries X 2) 02 03 04 05 06 2 -------------------------- Product Overview 2 3 Top Panel / Front Panel of the Soundbar -------------------------- 3 Bottom Panel of the Soundbar -------------------------- 3 Connecting the Soundbar 4 Connecting Electrical Power -------------------------- 4 Connecting the Soundbar to the Subwoofer –– Automatic connection between the subwoofer and the Soundbar –– M
07 Connecting a Mobile Device Connecting via Bluetooth 08 09 14 -------------------------- 14 Using the Remote Control 15 How to Use the Remote Control -------------------------- 15 Adjusting the Soundbar volume with a TV remote control -------------------------- 17 Installing the Wall Mount 18 Installation Precautions -------------------------- 18 Wallmount Components -------------------------- 18 10 Troubleshooting 20 11 License 21 12 Open Source License Notice 21 13 Important N
01 CHECKING THE COMPONENTS Bluetooth POWER Surround SOUND MODE VOL WOOFER SOUNDBAR Soundbar Main Unit 1 Subwoofer Remote Control / Batteries (AH59-02758A) 2 Power Cord (Subwoofer) (3903-001117) AC/DC Adapter (Main Unit) (BN44-00886A) Optical Cable (AH39-00779A) •• The power connection steps are labelled (1, 2). For more information about power connections, see page 4. •• For Soundbar wall mounting components, see page 18. •• HDMI cable is sold separately.
02 PRODUCT OVERVIEW Top Panel / Front Panel of the Soundbar Volume Power Position the product so that the SAMSUNG logo is located on the top. Display AUX IN HDMI IN Bottom Panel of the Soundbar AUX IN HDMI IN OPTICAL IN AUX IN AUX IN AUX IN HDMIHDMI IN HDMI OUT (TV-ARC) OPTICAL IN OPTICAL IN (TV-ARC) HDMI IN 5V 0.5A AUX IN HDMI OUT (TV-ARC) OPTICAL IN DC 19V HDMI IN 5V 0.5A AUX IN HDMI OUT (TV-ARC) OPTICAL IN 5V 0.5A DC 19V HDMI IN AUX IN OPTICAL IN HDMI OUT (TV-ARC) 5V 0.
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components (1, 2) to connect the units to electrical outlets in the following order: 1.) Subwoofer 2.) Soundbar Main Unit. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product.
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicators at the top of the subwoofer turn on.
Manually connecting the subwoofer if automatic connection fails Check before performing the manual connection •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. The red indicator on the top of the subwoofer turns off and the blue indicator blinks. ID SET 5 Sec ID SET POWER Rear of the Subwoofer Top of the Subwoofer 2. Turn off the Soundbar.
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to a selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– When using optical cable, this feature can be supported by 2017 Samsung Smart TVs that support Bluetooth. –– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1.
Auto Power Link Auto Power Link automatically turns on the Soundbar when the TV is turned on. 1. Connect the Soundbar and a TV with a digital optical cable. 2. Press the (Source) button on the top panel or on the remote control, and then select “D.IN”. 3. Press the Left button on the remote control for 5 seconds to turn Auto Power Link on or off. •• Auto Power Link is set to ON by default. M C (To turn off this function, turn off Auto Power using the Soundbar.
•• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the cable is connected to the correct port. •• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar. Method 2. Connecting Wirelessly Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• Only one TV can be connected at a time. The initial connection 1.
What are the BT READY and BT PAIRING statuses? •• BT READY : In this mode, you can search for previously connected TVs or connect to the Soundbar from a previously connected mobile device. •• BT PAIRING : In this mode, you can connect to a new device. (While in “BT” mode, press and hold the (Source) button for more than 5 seconds on the top panel of the Soundbar or on the remote control.) NOTES •• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external device’s sound through the Soundbar.
Connecting using an HDMI Cable Bottom of the Soundbar HDMI Cable (not supplied) External Device HDMI IN HDMI OUT HDMI Cable (not supplied) HDMI IN (ARC) HDMI OUT (TV-ARC) Top of the Soundbar HDMI 1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. 2. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the back of the product to the HDMI IN jack on your TV. 3.
06 CONNECTING A USB You can play music files located on USB storage devices through the Soundbar. USB port Display DC 19V HDMI IN 5V 0.5A AUX IN OPTICAL IN HDMI OUT (TV-ARC) USB 5V 0.5A 1. Connect the USB device to the USB port on the rear of the product. 2. Press the (Source) button on the top panel or on the remote control and then select “USB”. 3. “USB” appears in the display screen. 4. Play music files from the USB storage device through the Soundbar.
07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• You cannot connect more than one Bluetooth device at a time. Bluetooth device The initial connection 1. Press the (Source) button on the top panel or on the remote control, and then select “BT”. 2. Change “BT” to “BT PAIRING”.
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power Sound Control Bluetooth POWER Surround SOUND MODE VOL WOOFER SOUNDBAR Bluetooth POWER Surround Surround Surround You can select from TREBLE, BASS, or AUDIO SYNC. •• To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons.
Press the p button to pause a music file temporarily. If you press the button again, the music file plays. Play / Pause Bluetooth POWER Surround Press the indicated areas to select Up/Down/Left/Right. SOUND MODE Up/Down/ Bluetooth POWER Surround Left/Right SOUND MODE Press Up/Down/Left/Right on the button to select or set functions. •• Repeat To use the Repeat function in “USB” mode, press the Up button.
W OO FE R SO SO SO U N VO L D BA R Su rro un d W OO FE R D BA R N VO L SO M UN OD D E Bl u PO eto W oth ER Bl u PO eto W oth ER D BA R N U VO L D BA R N U U Su rro un d WOOFER SO M UN OD D E WOOFER W OO FE R Su rro un d Bluetooth POWER Surround SOUND MODE SO Bl u PO eto W oth ER Push the button up or down to adjust the volume. •• Mute Press the VOL button to mute the sound. Press it again to unmute the sound.
09 INSTALLING THE WALL MOUNT Wallmount Components 430 Installation Precautions Wall Mount Guide (AH63-04137A) •• Install on a vertical wall only. •• Do not install in a place with high temperature or humidity. •• Verify whether the wall is strong enough to support the product’s weight. If not, reinforce the wall or choose another installation point.
2. Mark the location where the screws will go 5. Insert a Holder-Fix Mount into each hole on through on the wall, and then remove the the product’s bottom side. Tighten each Wall Mount Guide. Next, drill holes for the Holder-Fix Mount to fix the Soundbar to the screws using an appropriately sized drill bit. 2 Bracket-Wall pieces. Center Line Center Line OPTICAL IN AUX IN DC 19V HDMI OUT (TV-ARC) 5V 0.5A HDMI IN 3.
10 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). The unit will not turn on. Is the power cord plugged into the outlet? ;; Connect the power plug to the outlet. A function does not work when the button is pressed.
11 LICENSE 12 OPEN SOURCE LICENSE NOTICE To send inquiries and requests regarding open Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. sources, contact Samsung via Email (oss.request@samsung.com). 13 IMPORTANT NOTES ABOUT SERVICE Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.
14 SPECIFICATIONS AND GUIDE Specifications USB Weight GENERAL AMPLIFIER Dimensions (W x H x D) 5V/0.5A Soundbar Main Unit 6.0 lbs (2.7 kg) Subwoofer (PS-WM20) 10.1 lbs (4.6 kg) Soundbar Main Unit Subwoofer (PS-WM20) 42.4 x 1.9 x 5.1 inches (1078.0 x 47.5 x 129.0 mm) 7.0 x 13.9 x 11.8 inches (179.0 x 353.0 x 299.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.
Certification model only The party responsible for product compliance: Samsung Electronics Co., LTD. America QA lab of Samsung 19 Chapin Rd. Building D, Pine Brook, New Jersey 07058 QUESTIONS OR COMMENTS? COUNTRY IN THE US CALL 1-800-SAMSUNG (726-7864) OR VISIT US ONLINE AT WRITE www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660 © 2017 Samsung Electronics Co., Ltd. All rights reserved.
