AV Receiver System User Manual
Table Of Contents
- Safety information
- Features
- Contents
- Description
- Connections
- CONNECTING A CD PLAYER
- CONNECTING AN iPod
- CONNECTING THE FM ANTENNA
- Basic functions of your AV Receiver
- BEFORE USING THE AV RECEIVER
- Basic functions of your AV Receiver
- Setup
- SETUP MENU TREE
- SETTING THE SPEAKER SIZE
- CONNECTION SETTING FOR SURROUND BACK
- SETTING THE SPEAKER LISTENING DISTANCE
- SETTING THE SPEAKER LEVEL
- SETTING THE TEST TONE
- SETTING DOLBY PRO LOGIC MODE
- SETTING DOLBY PRO LOGIC IIx
- SETTING TONE CONTROL
- SETTING NEO:6 MODE
- SETTING EX/ES MODE
- AV SYNC
- MP3 ENHANCER
- SMART VOLUME
- ASC (AUTO SOUND CALIBRATION) SETUP
- DRC SETUP
- DUAL MONO SETUP
- HDMI SETUP
- VARIABLE SET (Low Power Consumption SETUP)
- VIDEO CONV. (Video Conversion)
- ZONE2 SETUP
- 12-V TRIGGER
- Operation
- USING THE SURROUND MODES
- LISTENING TO THE RADIO
- USING AN iPod
- CONVENIENT FUNCTIONS
- SOFTWARE UPGRADE
- Miscellaneous
- OPERATING YOUR TV WITH THE REMOTE CONTROL
- OPERATING YOUR DVD OR BD PLAYER WITH THE REMOTE CONTROL
- Troubleshooting
- ASC Error List
- Appendix
- SPECIFICATIONS
57
ENG
● OPERATION
LISTENING TO THE RADIO
You can listen to the radio by using either automatic or manual tuning.
Press the INPUT SELECT button to select FM.
Select a frequency (radio broadcast).
Preset tuning :
Press the #,$ buttons on the remote control to select the preset frequency.
Manual tuning 1 (Automatic tuning):
Press and hold the TUNING/CH ( .,, ) buttons on the remote control to automatically tune in a frequency.
Manual tuning 2 :
Press the TUNING/CH ( .,, ) buttons on the remote control to increase or decrease the frequency step by
step.
You can also use the SELECT (.,,) button on the main uint to change the radio frequency.
To Listen in mono/stereo
Press the MO/ST button on the remote control.
Each time you press this button, STEREO or MONO will be selected in turn.
If you select MONO in an area with weak reception, it will help to reduce noise.
This function works only with the remote control.
Presetting radio stations
You can preset up to 30 FM stations.
E.g.: Setting station FM 89.10 in preset 2.
Press the INPUT SELECT button to select FM.
Press the TUNING/CH ( .,, ) buttons on the remote control
to select 89.10.
Refer to step 2 above to tune in automatically and manually.
Press the MEMORY button on the main unit.
You can also use the TUNER MEMORY button on the
remote control.
Tuner number will blink on the display.
Press the TUNING/CH ( .,, ) buttons on the remote control
to select preset 2.
You can select from presets 1 to 30.
Press the MEMORY button on the main unit.
Tuner number will disappear and station 89.10 will be saved
in preset 2.
To preset other stations, repeat steps 2 to 5.
To Listen to Preset Station
Press the TUNING MODE button to select PRESET and press the SELECT ( .,, ) buttons.
1.
2.
•
•
•
M
•
•
•
1.
2.
•
3.
•
•
4.
•
5.
•
6.
•
Æ
Æ
Æ
- HW-C900-XAA_0831.indd 57 - HW-C900-XAA_0831.indd 57 2010-08-31 6:22:302010-08-31 6:22:30