HW-C700 HW-C700B HW-C770S HW-C779S HW-C770BS AV Receiver System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HW-C700-C770S-C770BS-ELS_0504.
Safety information SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
ENG PRECAUTIONS 2.7 inches 3.9 inches 3.9 inches 3.9 inches Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). Make sure the ventilation slots are not covered. Do not stack anything on top of the amplifier.
Features Digital AV Receiver This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss. Dolby Pro Logic llx Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.It also provides Music,Movie and Game modes. Dolby Pro Logic IIx is an improved surround system that is optimized to a 7.1 CH multimedia system, enabling you to maximize your entertainment experience.
ENG Contents SAFETY INFORMATION 2 Safety Warnings Precautions 4 Accessories 7 9 10 11 11 12 Front Panel Rear Panel Display Insert Remote Control Batteries Operation Range of the Remote Control Tour of the Remote Control 14 16 17 18 19 20 21 22 23 24 25 27 27 Speaker Positioning Connecting the Speakers Connecting External Devices/Your TV via HDMI HDMI Function Connecting to your TV Connecting a DVD or BD(Blu-ray) Player Connecting a Cable, Satellite or Set-top Box Connecting a VCR Connecting a CD Pl
Contents SETUP 30 OPERATION 45 MISCELLANEOUS 54 TROUBLESHOOTING 30 34 35 36 37 38 38 39 39 40 41 42 42 42 43 44 44 44 Setup Menu Tree Setting the Speaker Size Setting the Speaker Listening Distance Setting the Speaker Level Setting the Test Tone Setting Dolby Pro Logic Mode Setting Dolby Pro Logic IIx Setting Dolby Pro Logic IIz Setting Tone Control Setting NEO:6 Mode Setting EX/ES Mode AV SYNC MP3 Enhancer Smart Volume ASC (Auto Sound Calibration) Setup DRC Setup HDMI Setup Variable Set 45 46 47 48
ENG Description FRONT PANEL 2 3 4 5 6 7 10 11 12 13 14 15 16 17 8 9 ● DESCRIPTION 1 18 19 20 1 HEADPHONE JACK Used to connect a set of headphones. 2 AUX IN JACKS Auxiliary AV input terminals used to connect a camcorder, portable DVD player or gaming device. 3 ASC MIC JACK Used to connect the ASC MIC for setting up ASC (Auto Sound Calibration). 4 DISPLAY Displays the speaker/audio input status, listening mode, etc. 5 S.DIRECT/STEREO BUTTON Used to select the S.DIRECT or STEREO mode.
Description FRONT PANEL 10 INPUT SELECT BUTTON Used to select a source. (FM BD/DVD SAT TV VCR CD AUX 7.1 MULTI CH IPOD AUDIO IPOD VIDEO). 11 AUDIO ASSIGN BUTTON Toggles to select an input mode for the selected source. 12 SOUND EFFECT BUTTON Toggles to select a surround sound mode. 13 SETUP BUTTON Displays the SETUP menu. 14 UP(,), DOWN(.), LEFT(<), RIGHT(>) BUTTONS Used to move the cursor up, down, left or right. 15 ENTER BUTTON Used to select an item in the SETUP menu.
ENG REAR PANEL 1 2 3 4 5 ● DESCRIPTION 6 7 8 9 10 11 12 15 16 18 13 19 14 17 1 FM ANTENNA JACK Connect the FM Antenna here. 2 MULTI CH IN JACKS Receives the analogue audio signal from an external player with a multi-channel port. 3 HDMI IN JACKS Receives digital video and audio signals simultaneously using an HDMI cable. 4 HDMI OUT JACK Outputs digital video and audio signals simultaneously using an HDMI cable. 5 USB PORT Can be only used for firmware upgrades.
Description REAR PANEL 9 OPTICAL IN JACKS (DIGITAL AUDIO IN) Receives the digital optical audio signal. 10 COAXIAL IN JACK (DIGITAL AUDIO IN) Receives the digital coaxial audio signal. 11 VCR VIDEO IN JACK Receives the video signal from a VCR. 12 VCR VIDEO OUT JACK Outputs the video signal to a VCR. 13 VIDEO IN JACKS Receives the video signal from a video player (BD/DVD, SAT,TV). 14 VIDEO OUT JACK Outputs the video signal to video devices (TV, Projector etc).
ENG INSERT REMOTE CONTROL BATTERIES * Batteries (AAA size) ● DESCRIPTION M Follow these precautions to avoid leaking or cracking cells: Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–). Assuming typical TV usage, the batteries last for about one year. Use the correct type of batteries. Batteries that look similar may differ in voltage. Always replace both batteries at the same time. Do not expose the batteries to heat or a flame.
Description TOUR OF THE REMOTE CONTROL INPUT SELECT TV SOURCE POWER 1 2 AMP/TV DIMMER BD/DVD RDS DISPLAY 3 4 TA 1 2 3 PTY- PTY SEARCH PTY+ 4 5 6 NEO : 6 SLEEP 7 8 9 PROLOGIC AUDIO ASSIGN DSP 0 5 23 7 24 8 MUTE TUNING /CH VOL ASC 10 11 12 TUNER MEMORY SUBWOOFER MO/ST SETUP/MENU INFO RETURN EXIT 13 14 15 21 22 6 9 16 17 18 19 20 BD/DVD MULTI CH SAT VCR / AUX TV 25 26 27 28 29 30 CD iPod 12 HW-C700-C770S-C770BS-ELS_0504.
Turns the receiver on/off. 2 AMP/TV BUTTON Used to select the AMP/TV mode. - If you select the AMP mode, the button will flash orange. - If you select the TV mode, the button will flash green. 3 NUMBER BUTTONS Used to select a TV channel. 4 NEO : 6 BUTTON Select the desired NEO:6 mode. 5 PROLOGIC BUTTON Select the desired Dolby Pro Logic audio mode. 6 SKIP BUTTONS Press to skip backwards or forwards on a connected DVD/BD player or iPod.
Connections This section involves various methods of connecting the AV receiver to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. SPEAKER POSITIONING There are two methods for positioning the speakers. When using Dolby Pro Logic IIz, place the Surround Back Speakers in the FHL, FHR position and connect them to SURROUND BACK/ FRONT HEIGHT Jack. * The HW-C700/C700B model does not supply speakers (sold separately). FHL FHR 6.
ENG Centre speaker It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV. ● CONNECTIONS Surround Speakers Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward.
Connections CONNECTING THE SPEAKERS FRONT (R) SURROUND (R) SURROUND BACK (R) PS-FC770S PS-RC770S PS-BC770S SURROUND BACK (L) SURROUND (L) FRONT (L) PS-BC770S PS-RC770S PS-FC770S ACTIVE SUBWOOFER (BUILT-IN POWER AMPLIFIER) PS-AW730 Model HW-C700/C700B AV Receiver CENTRE PS-CC770S HW-C700/C700B Model HW-C770S/C779S/C770BS HW-C770S/C779S/ AV Receiver C770BS FRONT SPEAKER PS-FC770S CENTRE SPEAKER PS-CC770S SURROUND SPEAKER PS-RC770S SURROUND BACK SPEAKER PS-BC770S ACTIVE SUBWOOFER PS-AW730 M One Active
ENG CONNECTING EXTERNAL DEVICES/YOUR TV VIA HDMI HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top box and more. By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio.
Connections HDMI FUNCTION Using Anynet+(HDMI-CEC) Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support Anynet+. 1. Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 17) 2. Set the Anynet+ function on your TV. (See the TV instructions manual for more information.
ENG CONNECTING TO YOUR TV ● CONNECTIONS or COMPONENT IN or VIDEO IN OPTICAL OUT AUDIO OUT Video Connection If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Input jacks on your TV. OR Connect the Video cable from the VIDEO OUT (MONITOR) jack on the back of your AV Receiver to the Video Input jack on your TV.
Connections CONNECTING A DVD OR BD(Blu-ray) PLAYER COMPONENT IN VIDEO IN or or COMPONENT OPTICAL OUT OUT AUDIO OUT VIDEO OUT DVD or BD Player or Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (BD/DVD) (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your DVD/BD player. OR Connect a Video cable from the VIDEO IN (BD/DVD) jack on the back of your AV Receiver to the Video Output jack on your DVD/BD player.
ENG CONNECTING A CABLE, SATELLITE OR SET-TOP BOX COMPONENT IN VIDEO IN ● CONNECTIONS or or SAT(Cable/Satellite/Set-top box) COMPONENT OPTICAL OUT OUT AUDIO OUT VIDEO OUT or Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (SAT) (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your SAT. OR Connect a Video cable from the VIDEO IN (SAT) jack on the back of your AV Receiver to the Video Output jack on your SAT.
Connections CONNECTING A VCR VCR AUDIO OUT VIDEO OUT VIDEO IN AUDIO IN VIDEO IN (For playback) (For recording) Video Connection For playback Connect a Video cable from the VIDEO IN (VCR) jack on the back of your AV Receiver to the Video Output jack on your VCR. For recording Connect a Video cable from the VIDEO OUT (VCR) jack on the back of your AV Receiver to the Video Input jack on your VCR. Audio Connection For playback Connect AUDIO IN (VCR) on your AV Receiver to the Audio Out of the VCR.
ENG CONNECTING A CD PLAYER CD player ● CONNECTIONS AUDIO OUT COAXIAL OUT or Audio Connection Connect the Digital Input (COAXIAL) on your AV Receiver to the Digital Output of the CD Player. OR Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player. M If the CD player has only one audio output jack, connect it to either the right or left audio input jack of the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.
Connections CONNECTING 7.1 CHANNEL DEVICES You can connect the AV receiver to a DVD player, SUPER AUDIO CD player or other device with 7.1 channel output. C SW SW FRONT SURROUND C SUB CENTER WOOFER SURROUND BACK 5.1 CH 7.1 CH 7.1 Channel device 24 HW-C700-C770S-C770BS-ELS_0504.
ENG CONNECTING AN iPod You can listen to audio from an iPod through the main unit. For iPod operation with your receiver, see this page and pages 50 ~ 51. ● CONNECTIONS iPOD 1. Connect the iPod dock connector to the iPod jack on your reciever. 2. Place the iPod in the Dock. • If you want to play a movie stored in your iPod player, you should set the player's TV Out option to On before inserting it into the dock. See page 51. 3. Press the iPod button on the remote control.
Connections CONNECTING AN iPod (Continued) iPod models that are compatible with HW-C700/C700B/C770S/C779S /C770BS M "Made for iPod" means that the dock has been designed to connect specifically for the iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
ENG CONNECTING THE FM ANTENNA 1. Connect the FM antenna supplied to the FM ANTENNA terminal as a temporary measure. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. ● CONNECTIONS FM antenna (supplied) M Do not place the antenna cable close to the power cord. Keep it as far away as possible. If you experience poor FM reception, use an external antenna.
Basic functions of your AV Receiver BEFORE USING THE AV RECEIVER Turning On/Off Connect the power plug to the outlet. Press the POWER button on the main unit for 2 seconds. • This unit will be turned on or set to Standby mode. • You can also turn the unit on/off by pressing the POWER button on the remote control. Remote control functions You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/DVD player with this remote control. See pages 54 ~ 55 for more details.
ENG SELECTING DIGITAL/ANALOGUE INPUT You can listen to sound in 2 channel analogue , Dolby Digital or DTS using this unit. 1. Press the INPUT SELECT button to select a desired function (BD/DVD, SAT,TV, CD, AUX). See page 28. AMP/TV DIMMER BD/DVD 1 2 3 4 5 6 ● BASIC FUNCTIONS OF YOUR AV RECEIVER 2. Press the AUDIO ASSIGN button on the remote control to select the external device you have connected.
Setup For your convenience, you can set this AV receiver's features for the best use. SETUP MENU TREE Here’s a quick look at how the setup menus are organized on your AV Receiver. AUDIO SETUP BD/DVD OPT 1,2,3 COAX OPT 1,2,3 COAX OPT 1,2,3 COAX OPT 1,2,3 COAX SAT TV CD SPK SIZE SPK DISTANCE SPK LEVEL TEST TONE DPLIIX SETUP DPLIIZ SETUP TONE CONTROL NEO:6 SETUP EX/ES SETUP A/V SYNC MP3 ENHANCER SMART VOLUME ASC SETUP DRC SETUP HDMI SETUP VARIABLE SET 30 HW-C700-C770S-C770BS-ELS_0504.
ENG SETUP MENU TREE (Continued) AUDIO SETUP FRONT LARGE SMALL CENTER LARGE SMALL NONE SURR LARGE SMALL NONE SBACK LARGE SMALL NONE FRONTH LARGE SMALL NONE SUBW YES NO CROVR SPK DISTANCE ● SETUP SPK SIZE 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180Hz, 200Hz F.L F.R CEN S.L 0.30 ~ 9.00m (0.3m step), default : 3m S.R SBL/FHL SBR/FHR S.W SPK LEVEL F.L F.R CEN S.L -10 ~ +10dB (1dB step) , default : 00dB S.R SBL/FHL SBR/FHR S.
Setup SETUP MENU TREE (Continued) AUDIO SETUP SPK SIZE SPK DISTANCE SPK LEVEL TEST TONE DPLIIX SETUP PANORAMA OFF ON DIMENSION -7 ~ 0 ~ +7 C- WIDTH 0~7 DPLIIZ SETUP TONE CONTROL HEIGHT OFF ON OFF ON TONE BASS -6dB ~ +6dB (1dB Step) TREBLE -6dB ~ +6dB (1dB Step) NEO:6 SETUP C-IMAGE 0~5 EX/ES SETUP AUTO OFF ON A/V SYNC MP3 ENHANCER SMART VOLUME ASC SETUP DRC SETUP HDMI SETUP VARIABLE SET 32 HW-C700-C770S-C770BS-ELS_0504.
ENG SETUP MENU TREE (Continued) AUDIO SETUP ● SETUP SPK SIZE SPK DISTANCE SPK LEVEL TEST TONE DPLIIX SETUP DPLIIZ SETUP TONE CONTROL NEO:6 SETUP EX/ES SETUP A/V SYNC SYNC OFF ~ SYNC 240MS (10MS Step) MP3 ENHANCER OFF ON SMART VOLUME OFF ON ASC SETUP START EQ ON / EQ OFF DRC SETUP MAX STD HDMI SETUP SYNC MIN ON OFF AVR TV ON OFF AUDIO ANYNET+ VARIABLE SET OFF ON 33 HW-C700-C770S-C770BS-ELS_0504.
Setup SETTING THE SPEAKER SIZE Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Æ 2. Press the ENTER button to select SETUP ENTER. 3. Press the ▲▼ buttons to select SPK SIZE, and then press the ENTER or ► button. 4.
ENG SETTING THE SPEAKER LISTENING DISTANCE If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the centre and surround speakers. 2. Press the ENTER button to select SETUP ENTER. ● SETUP 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Æ 3. Press the ▲▼ buttons to select SPK DISTANCE, and then press the ENTER or ► button. 4.
Setup SETTING THE SPEAKER LEVEL You can set the balance and level of speakers. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. Æ 3. Press the ▲▼ buttons to select SPK LEVEL, and then press the ENTER or ► button. 4. Press the ▲▼ buttons to select the speaker you want, and then press the ENTER or ► button. • Each time you press this button, F.L Æ F.RÆ CEN Æ S.L Æ S.R Æ SBL Æ SBR Æ S.
ENG SETTING THE TEST TONE Use the test tone to check the speaker connection status or level. 2. Press the ENTER button to select SETUP ENTER. ● SETUP 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Æ 3. Press the ▲▼ buttons to select TEST TONE, and then press the ENTER or ► button. 4. Press the ▲▼ buttons to select the option you want, and then press the ENTER or ► button.
Setup SETTING DOLBY PRO LOGIC MODE This mode provides 7.1 channel sound from 2 channel sources. Press the PROLOGIC button on the remote control. • MOVIE : Adds realism to the movie soundtrack. • MUSIC : Provides 7.1 channel surround sound for digital, analogue or existing stereo sources. • GAME : Enhances the excitement of the game’s sound. • MATRIX : You will hear 7.1 channel surround sound. • PL (Pro Logic) : You will experience a surround effect with 5.1 channel surround sound.
ENG SETTING DOLBY PRO LOGIC IIz Dolby Pro Logic IIz adds front height channels to surround sound. 2. Press the ENTER button to select SETUP ENTER. ● SETUP 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Æ 3. Press the ▲▼ buttons to select DPLIIZ SETUP, and then press the ENTER or ► button. 4. Press the ▲▼ buttons. • Each time you press this button, HEIGHT OFF Æ HEIGHT ON will be selected in turn.
Setup SETTING NEO:6 MODE You can play back 2 channel sound over 6.1 channels when enjoying music or a movie. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. Æ 3. Press the ▲▼ buttons to select NEO:6 SETUP, and then press the ENTER or ► button. 4. Press the ▲▼ buttons to set the C-IMAGE mode you want.
ENG SETTING EX/ES MODE When surround back speakers are connected, you can listen to 6.1 or 7.1 multi-channel sound using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources. 2. Press the ENTER button to select SETUP ENTER. ● SETUP 1. Press the SETUP/MENU button.
Setup AV SYNC Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. Æ 3. Press the ▲▼ buttons to select A/V SYNC, and then press the ENTER or ► button. 4. Press the ▲▼ buttons to set the A/V Sync mode you want.
ENG ASC (AUTO SOUND CALIBRATION) SETUP By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1channel sound field optimized for your environment. ● SETUP - Before Setting 1. Plug the ASC microphone into the ASC MIC jack. 2. Place the ASC microphone at the listening position. 3.
Setup DRC SETUP You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. Æ 3. Press the ▲▼ buttons to select DRC SETUP, and then press the ENTER or ► button. 4.
ENG Operation USING THE SURROUND MODES Using the SOUND EFFECT button on the front of the main unit 1. Press the SOUND EFFECT button to select DPLIIX. • Each time you press this button, DPLIIX Æ NEO:6 Æ SFE will be selected in turn. 2. Press the UP/DOWN ( ,,. ) button. • Each time you press the UP/DOWN ( ,,. ) button, MUSIC Æ GAME Æ MATRIX Æ PL Æ MOVIE will be selected in turn. • You can also select the DPLIIx mode by pressing the PROLOGIC button on the remote control.
Operation USING THE SURROUND MODES (Continued) Surround Mode and Input Signal Chart o = active, – = inactive Surround Mode DOLBY NEO:6 SFE EX/ES STEREO True-HD Dolby Digital + DTS-HD Input Signal Decoding Dolby D Surr. EX Dolby D (5.1ch) Dolby D Surr.EX Dolby D(5.1ch) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) Analogue L.PCM (Audio) Analogue Dolby D (2ch) Dolby D (2ch Surr) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) Analogue Dolby D Surr. EX Dolby D (5.1ch) DTS-ES DTS (5.
ENG LISTENING TO THE RADIO You can listen to the radio by using either automatic or manual tuning. 1. Press the INPUT SELECT button to select FM. M ● OPERATION 2. Select a frequency (radio broadcast). • Preset tuning : Press the #,$ buttons on the remote control to select the preset frequency. • Manual tuning 1 (Automatic tuning): Press and hold the TUNING/CH ( .,, ) buttons on the remote control to automatically tune in a frequency. • Manual tuning 2 : Press the TUNING/CH ( .
Operation ABOUT RDS BROADCASTING Using the RDS (Radio Data System) to receive FM stations RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display.
ENG PTY (Program Type) indication and PTY-SEARCH function One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes. To search for a program using the PTY codes ● OPERATION Before you start, remember... • The PTY Search is only applicable to preset stations. • To stop searching any time during the process, press PTY SEARCH while searching. • There is a time limit in doing the following steps.
Operation USING AN iPod You can enjoy playback of your iPod using the supplied remote control. Listening to Music (iPod audio function) You can play music files stored in the iPod player by connecting it to the AV receiver. 1. Connect the iPod dock connector to the iPod jack on the AV Receiver. 2. Place the iPod in the dock. • Your iPod is automatically turned on. 3. Press the INPUT SELECT button on the remote control to select IPOD AUDIO mode. 4. Press the PLAY button on the remote control to play.
ENG USING AN iPod (Continued) Watching a Movie (iPod Video function) 1. Connect the iPod dock connector to the iPod jack on the AV receiver. 2. In the iPod screen, move to Videos > Settings and set the TV Out option to On. 3. Place the iPod in the dock. 4. Press the INPUT SELECT button on the remote control to select IPOD VIDEO mode. 5. Set the AV IN option of the TV connected to the AV receiver to COMPOSITE.
Operation CONVENIENT FUNCTIONS Sleep timer function You can set the time that this unit will shut itself off. Press the SLEEP button. • SLEEP : OFF Æ 15 Æ 30 Æ 45 Æ 60 Æ 90 Æ 120 M (MIN) will be selected in turn. 4 5 NEO : 6 SLEEP 6 7 8 9 PROLOGIC AUDIO ASSIGN DSP 0 To check sleep timer Press the SLEEP button. • The remaining time before this unit will shut itself off is shown on the display. • Pressing the button again changes the sleep time from what you set previously.
ENG Reset function When the Power is on, 1. Press the MUTE button. • MUTE appears on the display. 3. Press the ▲▼ buttons to select YES. • The unit will turn off after 5 seconds. SLEEP 7 8 9 PROLOGIC AUDIO ASSIGN DSP 0 MUTE VOL ASC TUNER MEMORY SUBWOOFER ● OPERATION 2. Press the 9 button five times and then press the ENTER button. • "INITIAL : NO" appears on the display. NEO : 6 TUNING /CH MO/ST POPUP SETUP/MENU INFO RETURN EXIT When the Power is Off, 1.
Miscellaneous OPERATING YOUR TV WITH THE REMOTE CONTROL 1. Press the POWER button to turn on the TV. 2. Press the AMP/TV button to set the remote to TV mode. 3. Point the remote control toward the TV. 4. While holding down the POWER button, enter the code corresponding to your brand of TV. • If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. • If the code matches the TV's code, the TV will be turned off. 5.
ENG OPERATING YOUR TV WITH THE REMOTE CONTROL (Continued) TV Brand Code List Brand AOC Bell & Howell (M.
Miscellaneous OPERATING YOUR DVD OR BD PLAYER WITH THE REMOTE CONTROL 1. Press the POWER button to turn on the DVD (BD) player. 2. Press the BD/DVD button on the remote control to set the remote to DVD (BD) mode. 3. Point the remote control toward the DVD (BD). 4. While holding down POWER button, enter the code corresponding to your brand of DVD (BD). • If there is more than one code listed for your DVD (BD) in the table, enter one at a time to determine which code works.
ENG Troubleshooting Before requesting service, please check the following. Symptom Check Remedy • Is the power cord plugged into the outlet? • Connect the power plug to the outlet. A function does not work when the button is pressed. • Is there static electricity in the air? • Disconnect the power plug and connect it again. Sound is not produced. • Are the speakers and external components connected properly? • Connect them correctly.
Troubleshooting Symptom Check Remedy Can't select Dolby Pro Logic llx mode. • Is the input signal selected properly? • Only 2 channel signal can select Dolby Pro Logic IIx mode. (ex:Dolby Digital, PCM, 2 channel analogue input signal.) Can't select NEO:6 mode. • Is the input signal selected properly? • Use PCM and Analogue input signal. There is no sound when playing a DTS encoded DVD.
ENG Appendix SPECIFICATIONS FM TUNER AMPLIFIER FREQUENCY RESPONSE HDMI VIDEO OUTPUT 6.21 Kg Dimensions (W x H x D) 436.88 x 167.64 x 373.38 mm Operating temperature range +5°C~+35°C Operating humidity range 10%~75% Frequency response 87.5~108.0MHz Usable sensitivity 12dBf S/N ratio MONO/STEREO 55/55dB Distortion MONO/STEREO 0.3/0.8% Stereo separation 30dB Tuner output level 1kHz, 75kHz Dev Rated output 20Hz~20kHz/THD = 0.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area Contact Center ` North America Canada 1-800-SAMSUNG (726-7864) Mexico 01-800-SAMSUNG (726-7864) U.S.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.