FULL MANUAL HW-A450 Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Para evitar cualquier avería o daños, lea detalladamente este manual de instrucciones antes de conectar y utilizar este aparato. Conserve el manual para referencia futura.
SAFETY INFORMATION SAFETY WARNINGS WARNING •• To reduce the risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK). CAUTION NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside.
PRECAUTIONS 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery 1. Ensure that the AC power supply in your in the general household trash. Do not house complies with the power expose the battery to excess heat, direct requirements listed on the identification sunlight, or fire. Do not short circuit, sticker located on the bottom of your disassemble, or overheat the battery. product.
CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control (AA batteries X 2) 02 03 04 05 -------------------------- Product Overview 2 3 Front Panel / Top Panel of the Soundbar -------------------------- 3 Bottom Panel of the Soundbar -------------------------- 4 Connecting the Soundbar 5 Connecting Electrical Power -------------------------- 5 Connecting the Soundbar to the Subwoofer –– Automatic connection between the Subwoofer and the Soundbar –– Manuall
07 Connecting a Mobile Device Connecting via Bluetooth 08 09 17 -------------------------- 17 Using the Remote Control 20 How to Use the Remote Control -------------------------- 20 Adjusting the Soundbar volume with a TV remote control -------------------------- 23 Using the Hidden Buttons (Buttons with more than one function) -------------------------- 24 Output specifications for the different sound effect modes -------------------------- 24 Installing the Wall Mount 25 Installation Prec
01 CHECKING THE COMPONENTS PAIR SOUND MODE VOL WOOFER SOUNDBAR Soundbar Main Unit Subwoofer Remote Control / Batteries (Not available in some locations or models) Optical Cable Wall Mount Guide x2 Power Cord (Subwoofer, Soundbar) x2 Holder-Screw x2 x2 (M4 x L10) Screw Bracket-Wall Mount •• For more information about the power supply and power consumption, refer to the label attached to the product.
02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar Position the product so that the SAMSUNG logo is located on the top. Top Panel Display Displays the product’s status and current mode. (Power) Button Turns the power on and off. •• Auto Power Down Function The unit turns off automatically in the following situations: –– In D.IN / BT / USB Mode : If there is no audio signal for 18 minutes. (Volume) Button Adjusts the volume.
Bottom Panel of the Soundbar DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) POWER DIGITAL AUDIO IN (OPTICAL) POWER USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device. USB (5V 0.5A) Connect a USB device here to play music files stored on the USB device through the Soundbar. POWER Connect the Soundbar's AC power cable. •• When disconnecting the power cord from a wall outlet, pull the plug. Do not pull the cable.
03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order: 1. Connect the power cord to the Subwoofer. 2. Connect the power cord to the Soundbar. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the DIGITAL AUDIO IN (OPTICAL) label attached to the product.
Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.
Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. •• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Rear of Subwoofer 2.
NOTES •• Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. •• Before moving or installing this product, be sure to turn off the power and disconnect the power cord. •• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear of the sub-woofer will turn red after blinking blue several times. •• If you use a device that uses the same frequency (5.
Connecting an SWA-9100S (Sold Separately) to your Soundbar Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-9100S, sold separately) to your Soundbar. 1. Connect the Wireless Receiver Module to 2 Surround Speakers. –– When connecting the speaker cable, connect the core wire to the speaker. SURROUND-RIGHT SURROUND-RIGHT –– The speaker cables are color coded.
3. Press and hold the Up button on the remote control for at least 5 seconds. •• The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. •• The Soundbar will automatically power on when ID SET is complete. SAMSUNG logo is on the top PAIR 5 Sec ID SET ND SOUODE M CAUTION •• If your Soundbar was playing music when it connects to the SWA-9100S, you may hear some stuttering from the woofer as the connection finalizes. 4.
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. –– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1.
1. Connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar to the OPTICAL OUT port of the TV with a digital optical cable. 2. Press the (Source) button on the top panel or remote control, and then select the “D.IN” mode. Method 2. Connecting Wirelessly Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• Only one TV can be connected at a time. PAIR OR ND SOUODE M The initial connection 1.
Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but “BT”. •• Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) •• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the Left button on the remote control for 5 seconds with the Soundbar in “BT READY” status.
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired connection or Bluetooth connection to play the external device’s sound through the Soundbar. Connecting using an Optical Cable Bottom of the Soundbar Optical Cable BD / DVD player / OPTICAL OUT Top of the Soundbar Set-top box / Game console DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) D.IN 1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT port of the Source Device using a digital optical cable. 2.
06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. USB port DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) POWER USB (5V 0.5A) USB 1. Connect the USB device to the USB port on the bottom of the product. 2. Press the (Source) button on the top panel or on the remote control, and then select “USB”. 3. “USB” appears in the display screen. 4. Play music files from the USB storage device through the Soundbar.
File Format Type Compatibility list Extension Codec Sampling Rate Bitrate *.mp3 MPEG 1 Layer2 32kHz ~ 48kHz 32kbps~320kbps MPEG 1 Layer3 32kHz ~ 48kHz 32kbps~320kbps MPEG 2 Layer3 16kHz ~ 24kHz 8kbps~160kbps MPEG 2.5 Layer3 8kHz ~ 12kHz 8kbps~160kbps *.wma WMA7/8/9/STD 8kHz ~ 48kHz 32kbps~320kbps *.aac AAC 8kHz ~ 96kHz < 1728kbps AAC-LC HE-AAC *.ogg Vorbis codec (8, 16, 22.05, 32, 44.1, 48)kHz unsupport ogg: 1. block size 0 < 256, block size 0 > 1024 2.
07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• You cannot connect more than one Bluetooth device at a time. PAIR OR Bluetooth device ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the top panel and then select “BT”.
What is the difference between BT READY and BT PAIRING? •• BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. •• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the on the remote control or press and hold the PAIR button (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device’s user manual. •• The Soundbar will be disconnected. •• When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display “BT DISCONNECTED” on the front display. Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the top panel or on the remote control, and then change to any mode except “BT”.
08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power PAIR Press to select a source connected to the Soundbar. Source Press the (Mute) button to mute the sound. Press it again PAIR to unmute the sound. SOUND MODE PAIR Mute SOUND MODE Press to cycle through the available sound modes: SOUND MODE SOUND MODE STANDARD, SURROUND SOUND, BASS BOOST, GAME, or ADAPTIVE . –– STANDARD VOL WOOFER Outputs the original sound.
•• DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the SOUND MODE button for more than 5 seconds while the Soundbar is powered off to turn DRC (Dynamic Range Control) on or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.) •• Bluetooth Power This feature automatically turns the Soundbar on when it receives a connection request from a previously connected TV or Bluetooth device. The setting is On by default.
When pressed, the settings TREBLE, BASS, and AUDIO SYNC are displayed in sequence. The desired settings can be adjusted using the Up/Down buttons. •• To control the volume of the treble or bass sound, press the (Sound Control) button to select TREBLE or BASS and then adjust the volume between -6~+6 by using the Up/ Down buttons. •• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.
Adjusting the Soundbar volume with a TV remote control Adjust the Soundbar volume using the TV’s remote control. •• This function can be used with IR remote controls only. Bluetooth remote controls (remote controls that require pairing) are not supported. •• Set the TV speaker to External Speaker to use this function. •• Manufacturers supporting this function: VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1. Turn Off the Soundbar. 2. Push up and hold the WOOFER button for 5 seconds.
Using the Hidden Buttons (Buttons with more than one function) Hidden Button Reference page Remote Control Button Function WOOFER (Up) TV remote control On/Off (Standby) page 23 Left TV Auto connect On/Off (BT Ready) page 13 Up ID SET page 21 (Sound Control) SOUND MODE 7 Band EQ (Press and hold 5 seconds) page 22 Reset (Press and hold 10 seconds) page 28 DRC ON/OFF (Standby) page 21 Bluetooth Power page 21 Output specifications for the different sound effect modes Output Effect STAND
09 INSTALLING THE WALL MOUNT Wallmount Components Wall Mount Guide Installation Precautions x2 x2 •• Install on a vertical wall only. •• Do not install in a place with high (M4 x L10) Holder-Screw temperature or humidity. •• Verify whether the wall is strong enough to Screw x2 support the product’s weight. If not, reinforce the wall or choose another installation point.
2. Align the Wall Mount Guide’s Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. •• If you are not mounting below a TV, place the Center Line in the center of the installation area. 6.
7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 10 PLACING THE SOUNDBAR ON A TV STAND Place the Soundbar on a TV stand. 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws.
11 SOFTWARE UPDATE Update Procedure Important: The update function erases all user settings. We recommend you write down your settings so that you can easily reset them after Samsung may offer updates for the Soundbar’s the update. Note that updating the firmware system firmware in the future. resets the subwoofer connection too. 1. Connect a USB thumb drive to the USB port USB port DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) on your computer.
If UPDATE is not displayed 1. Turn off the Soundbar, disconnect and then reconnect the USB storage device that contains the update files to the Soundbar’s USB port. 2. Disconnect the Soundbar’s power cord, reconnect it, and then turn on the Soundbar. NOTES •• The firmware update may not work properly if audio files supported by the Soundbar are stored in the USB storage device. •• Do not disconnect the power or remove the USB device while updates are being applied.
12 TROUBLESHOOTING Before seeking assistance, check the following. Soundbar does not turn on. Subwoofer does not output any sound. ;; Check whether the power cord of the Soundbar is correctly inserted into the outlet. ;; Check whether the LED indicator on the rear of the Subwoofer is on in blue. Reconnect the Soundbar and Subwoofer if the indicator is blinking slowly in blue or turned red. (See page 7.) ;; You may experience an issue if there is an obstacle between the Soundbar and Subwoofer.
13 LICENSE Soundbar does not connect via Bluetooth. ;; When connecting a new device, switch to “BT PAIRING” for connection. (Press the PAIR button on the remote control or press the (Source) button on the body for at least 5 seconds.) ;; If the Soundbar is connected to another device, disconnect that device first to switch the device. ;; Reconnect it after removing the Bluetooth speaker list on the device to connect.
14 OPEN SOURCE LICENSE NOTICE [ENERGY STAR] ENERGY STAR qualified model only –– Your Samsung product is ENERGY STAR qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification. –– Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices.
16 SPECIFICATIONS AND GUIDE Specifications Model Name HW-A450 USB 5V/0.5A Weight 1.5 kg Dimensions (W x H x D) 860.0 x 54.0 x 74.0 mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % ~ 75 % AMPLIFIER Rated Output power 40W x 2, 6 ohm Supported play formats LPCM 2ch, Dolby Audio™ (DTS 2.0 sound is played in DTS format.) (supporting Dolby® Digital), DTS Subwoofer Name PS-WA45T Weight 4.3 kg Dimensions (W x H x D) 181.5 x 343.0 x 272.
INFORMACIÓN DE SEGURIDAD ADVERTENCIAS DE SEGURIDAD PARA REDUCIR EL PELIGRO DE DESCARGA ELÉCTRICA, NO RETIRE LA TAPA (NI LA PARTE TRASERA). NO CONTIENE ELEMENTOS QUE DEBA REEMPLAZAR EL USUARIO. EN CASO DE AVERÍA, SOLICITE LA AYUDA DE PERSONAL ESPECIALIZADO. Consulte la tabla a continuación para obtener una explicación de los símbolos que podrían aparecer en su producto Samsung. ADVERTENCIA •• Para reducir el riesgo de incendio o de descarga eléctrica, no exponga este aparato a la lluvia ni a lahumedad.
PRECAUCIONES 1. Asegúrese de que la fuente de alimentación de CA de su hogar cumpla con los requisitos mencionados en la etiqueta de identificación ubicada en la parte inferior del producto. Instale el producto horizontalmente, sobre una base adecuada (mueble), con espacio suficiente a su alrededor para ventilación 7~10 cm. Asegúrese de que los orificios de ventilación no queden tapados. No coloque la unidad sobre amplificadores o cualquier otro equipo que pueda generar calor.
ÍNDICE 01 Verificación de los Componentes Colocación de las pilas antes de utilizar el control remoto (2 pilas AA) 02 03 04 05 -------------------------- Descripción del Producto 2 3 Panel frontal/panel superior de la Soundbar -------------------------- 3 Panel inferior de la Soundbar -------------------------- 4 Conexión de la Soundbar 5 Conexión del suministro eléctrico -------------------------- 5 Conexión de la Soundbar al subwoofer –– Conexión automática entre el subwoofer y la Sou
07 Conexión de un Dispositivo móvil Conexión vía Bluetooth 08 17 -------------------------- 17 Uso del Control Remoto 20 Cómo utilizar el control remoto -------------------------- 20 Ajuste del volumen de la Soundbar con un control remoto de televisor -------------------------- 23 Uso de los botones ocultos (botones con más de una función) -------------------------- 24 Especificaciones de salida para los diferentes modos de efectos de sonido -------------------------- 24 09 Instalación del Sop
01 VERIFICACIÓN DE LOS COMPONENTES PAIR SOUND MODE VOL WOOFER SOUNDBAR Unidad principal de la Soundbar Subwoofer Control remoto / Pilas (No disponible en algunos lugares o para algunos modelos) Cable óptico Guía para montaje en la pared x2 Cable de alimentación (Subwoofer, Soundbar) x2 Tornillo de sujeción x2 x2 (M4 x L10) Tornillo Soporte de montaje en la pared •• Para la fuente de alimentación y el consumo de energía, consulte la etiqueta pegada en el producto.
02 DESCRIPCIÓN DEL PRODUCTO Panel frontal/panel superior de la Soundbar Coloque el producto de manera que el logotipo de SAMSUNG quede en la parte superior. Panel superior Pantalla Muestra el estado del producto y el modo actual. Botón (Encendido) Permite encender y apagar la Soundbar. •• Función de Auto Power Down La unidad se apaga automáticamente en las siguientes situaciones. –– Modo D.IN / BT / USB: Si no hay señal de audio por 18 minutos.
Panel inferior de la Soundbar DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) POWER DIGITAL AUDIO IN (OPTICAL) POWER USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) Permite conectar la Soundbar a la salida digital (óptica) de un dispositivo externo. USB (5V 0.5A) Conecte un dispositivo USB aquí para reproducir archivos de música que se encuentran en el dispositivo USB a través de la Soundbar. POWER Conecte el cable de alimentación de CA de la Soundbar.
03 CONEXIÓN DE LA SOUNDBAR Conexión del suministro eléctrico Utilice los componentes de alimentación para conectar el subwoofer y la Soundbar a un tomacorriente en el siguiente orden: 1. Conecte el cable de alimentación al subwoofer. 2. Conecte el cable de alimentación a la Soundbar. Consulte las siguientes ilustraciones. •• Para la fuente de alimentación y el consumo de energía, consulte la etiqueta pegada en el producto.
Conexión de la Soundbar al subwoofer Cuando el subwoofer está conectado, puede disfrutar de sonidos graves potentes. Conexión automática entre el subwoofer y la Soundbar Cuando lo enciende después de conectar los cables de alimentación a la Soundbar y el subwoofer, el subwoofer se conectará automáticamente a la Soundbar. •• Cuando finaliza el emparejamiento automático, se enciende el indicador azul de la parte posterior del altavoz de graves.
Conexión manual del subwoofer en caso de error en la conexión automática Antes de realizar el procedimiento de conexión manual que figura a continuación: •• Verifique si los cables de alimentación de la Soundbar y el subwoofer están conectados correctamente. •• Asegúrese de que la Soundbar esté encendida. 1. Mantenga presionado ID SET en la parte posterior del subwoofer durante al menos 5 segundos. •• El indicador rojo de la parte posterior del subwoofer se apaga y el indicador azul parpadea.
NOTAS •• No conecte el cable de alimentación de este producto ni de su televisor a una toma de pared hasta realizar todas las conexiones entre los componentes. •• Antes de mover o instalar este producto, asegúrese de apagar el equipo y desconectar el cable de alimentación. •• Si la unidad principal está apagada, el subwoofer inalámbrico pasará a modo de espera y el LED de STANDBY de la parte posterior se verá rojo después de parpadear con una luz azul varias veces.
Conexión del SWA-9100S (se vende por separado) a una Soundbar Conecte el Kit de parlante trasero inalámbrico de Samsung (SWA-9100S: se vende por separado) a la Soundbar para lograr un verdadero sonido envolvente inalámbrico. 1. Conecte el módulo receptor inalámbrico a 2 parlantes de sonido envolvente. –– Para hacer la conexión con el cable del altavoz, conecte el hilo conductor al altavoz. SURROUND-RIGHT SURROUND-RIGHT –– Los cables del parlante están codificados con colores.
3. Mantenga presionado el botón Arriba en el control remoto al menos 5 segundos. •• El mensaje ID SET aparece en la pantalla de la Soundbar durante un momento y luego desaparece. •• La Soundbar se encenderá automáticamente cuando ID SET esté completo.
04 CONEXIÓN A SU TELEVISOR Escuche el sonido de su televisor desde su Soundbar a través de conexiones por cable o inalámbricas. •• Cuando la Soundbar está conectada a un televisor Samsung seleccionado, esta se puede controlar mediante el control remoto del televisor. –– Esta función es compatible con Samsung Smart TV, modelos 2017 o posteriores, que admitan Bluetooth cuando conecte la Soundbar al televisor usando un cable óptico.
1. Conecte la toma DIGITAL AUDIO IN (OPTICAL) de la Soundbar a la toma OPTICAL OUT del televisor con un cable óptico digital. 2. Presione el botón (Fuente) en el panel superior o en el control remoto y, luego, seleccione el modo “D.IN”. Método 2. Conexión inalámbrica Conexión de un televisor vía Bluetooth Cuando un televisor está conectado a través de Bluetooth, puede escuchar sonido estéreo sin utilizar varios cables. •• Solo puede conectar un televisor a la vez.
Desconexión de la Soundbar del televisor Presione el botón (Fuente) en el panel superior o en el control remoto y cambie a cualquier modo excepto “BT”. •• La desconexión lleva tiempo porque el televisor debe recibir una respuesta de la Soundbar. (El tiempo que dura la desconexión puede variar según el modelo del televisor).
05 CONEXIÓN DE UN DISPOSITIVO EXTERNO Conecte un dispositivo externo a través de un cable o de una conexión de Bluetooth para reproducir el sonido del dispositivo exterior a través de la Soundbar. Conexión con un cable óptico Parte inferior de la Soundbar Cable óptico Reproductor de OPTICAL OUT Parte superior de la Soundbar Blu-ray/Reproductor de DVD/ Decodificador/ DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) Consola de juegos D.IN 1.
06 CONECTAR UN DISPOSITIVO DE ALMACENAMIENTO USB Puede reproducir archivos de música que se encuentran en dispositivos de almacenamiento a través de la Soundbar. Puerto USB DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) POWER USB (5V 0.5A) USB 1. Conecte el dispositivo USB en el puerto USB en la parte inferior del producto. 2. Presione el botón (Fuente) en el panel superior o en el control remoto y, luego, seleccione “USB”. 3. “USB” aparece en la ventana de visualización. 4.
Lista de compatibilidad Extensión Códec Velocidad de muestreo Velocidad en bits *.mp3 MPEG 1 Layer2 32kHz ~ 48kHz 32 ~ 320 kbps MPEG 1 Layer3 32kHz ~ 48kHz 32 ~ 320 kbps MPEG 2 Layer3 16kHz ~ 24kHz 8 ~ 160 kbps MPEG 2.5 Layer3 8kHz ~ 12kHz 8 ~ 160 kbps *.wma WMA7/8/9/STD 8kHz ~ 48kHz 32 ~ 320 kbps *.aac AAC 8kHz ~ 96kHz < 1728 kbps AAC-LC HE-AAC *.ogg Códec Vorbis (8, 16, 22,05, 32, 44,1, 48)kHz incompatible con ogg: 1. tamaño del bloque 0 < 256, tamaño del bloque 0 > 1024 2.
07 CONEXIÓN DE UN DISPOSITIVO MÓVIL Conexión vía Bluetooth Cuando un dispositivo móvil está conectado a través de Bluetooth, puede escuchar sonido estéreo sin utilizar varios cables. •• No puede conectar más de un dispositivo Bluetooth a la vez. PAIR O Dispositivo Bluetooth ND SOUODE M La conexión inicial 1. Presione el botón (O) PAIR en el control remoto para ingresar al modo “BT PAIRING”. a. Presione el botón (Fuente) en el panel superior y, luego, seleccione “BT”.
¿Cuál es la diferencia entre BT READY y BT PAIRING? •• BT READY : En este modo, puede buscar los televisores que se conectaron anteriormente o conectar un dispositivo móvil que conectó anteriormente a la Soundbar. •• BT PAIRING : En este modo, puede conectar un dispositivo nuevo a la Soundbar. (Presione el botón PAIR en el control remoto o mantenga presionado el botón (Fuente) en la parte superior de la Soundbar durante más de 5 segundos mientras la Soundbar está en modo “BT”.
Desconexión del dispositivo Bluetooth de la Soundbar Puede desconectar el dispositivo Bluetooth de Soundbar. Para obtener instrucciones, consulte el manual del usuario del dispositivo Bluetooth. •• Soundbar se desconectará. •• Cuando se desconecta la Soundbar del dispositivo Bluetooth, aparecerá “BT DISCONNECTED” en la pantalla frontal de la Soundbar.
08 USO DEL CONTROL REMOTO Cómo utilizar el control remoto Enciende y apaga la Soundbar. Encender Presione el botón Fuente para seleccionar una fuente que esté conectada a la Soundbar. PAIR Fuente Silencio SOUND MODE VOL WOOFER SOUND MODE VOL SOUND MODE VOL SOUND Presione este botón para recorrer los diferentes MODE modos de sonido: STANDARD, SURROUND SOUND, BASS BOOST, GAME o ADAPTIVE. SOUND MODE –– STANDARD Reproduce el sonido original.
•• DRC (Dynamic Range Control) Le permite aplicar el control de rango dinámico a las pistas Dolby Digital. Mantenga presionado el botón SOUND MODE durante más de 5 segundos con la Soundbar apagada para encender o apagar la función DRC (control de rango dinámico). Cuando la función DRC está encendida, se reducen los sonidos fuertes. (Es posible que el sonido se distorsione).
PAIR R FE FE W OO W OO D BA R BA R N SO U VO L D N MODE U SO O U N VO L D (BAJOS)SOUND D BA R BA R W OO OO FE FE WOOFER N NIVEL de R SOUND MODE WOOFER R R SO M UN OD D E VOL U SOUND MODE SO PAIR VO L sonido SO M UN OD D E Control de SO M UN OD D E Cuando se presiona este botón, los ajustes TREBLE, BASS y AUDIO SYNC se muestran en secuencia. Se puede regular el ajuste deseado mediante los botones Arriba/Abajo.
Ajuste del volumen de la Soundbar con un control remoto de televisor Ajuste el volumen de la Soundbar con el control remoto del televisor. •• Esta función solo se puede usar con controles remotos IR. Los controles remotos Bluetooth (controles remotos que requieren emparejamiento) no son compatibles. •• Configure el parlante del televisor en Altavoz externo para usar esta función. •• Fabricantes que admiten esta función: VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1. Apague la Soundbar.
Uso de los botones ocultos (botones con más de una función) Botón oculto Página de referencia Botón del mando a distancia Función WOOFER (Arriba) Encendido/Apagado control remoto del TV (espera) Izquierda Conexión automática del TV (BT listo) Página 13 Arriba ID SET Página 21 EQ 7 bandas (mantener presionado 5 segundos) Página 22 Restablecer (mantener presionado 10 segundos) Página 28 DRC ON/OFF (espera) Página 21 Bluetooth Power Página 21 (Control de sonido) SOUND MODE Página 23 Espe
09 INSTALACIÓN DEL SOPORTE DE MONTAJE EN LA PARED Componentes de soporte Guía para montaje en la pared x2 x2 (M4 x L10) Tornillo de sujeción Precauciones para la instalación Tornillo x2 •• Instálelo en una pared vertical únicamente. •• No lo instale en un lugar donde la temperatura sea alta o haya humedad. Soporte de montaje en la pared •• Verifique si la pared es lo suficientemente resistente como para soportar el peso del producto. Si no lo es, refuerce la pared o elija otro lugar 1.
2. Haga coincidir la Línea central de la guía 5. Pase un tornillo (no suministrado) por cada para montaje en la pared con el centro de su Tornillo de sujeción y luego ajuste cada televisor (si va a montar la Soundbar debajo tornillo con firmeza en un orificio de soporte de su televisor) y luego fije la Guía para del tornillo. montaje en la pared a la pared con cinta adhesiva. •• Si no la va a montar debajo del televisor, coloque la Línea central en el centro del área de instalación. 6.
7. Para instalar la Soundbar con el Soporte de montaje en la pared ya colocado, cuelgue el soporte de montaje en la pared de los Tornillos de sujeción que están en la pared. 10 COLOCACIÓN DE LA SOUNDBAR EN UN SOPORTE PARA TV Coloque la Soundbar en un soporte para TV. 8. Deslice la Soundbar hacia abajo, como se muestra a continuación, de manera que los Soportes de montaje para pared se apoyen firmemente en los Tornillos de sujeción.
11 ACTUALIZACIÓN DEL SOFTWARE Procedimiento de actualización Es posible que Samsung ofrezca actualizaciones para el firmware del sistema de la Soundbar en el futuro. Puerto USB DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) DIGITAL AUDIO IN (OPTICAL) POWER USB (5V 0.5A) Si le ofrecen una actualización, puede actualizar el firmware conectando el dispositivo USB con la actualización del firmware almacenada en mismo al puerto USB de la Soundbar.
Si no aparece la opción UPDATE 1. Apague la Soundbar, desconecte y vuelva a conectar el dispositivo de almacenamiento que contiene los archivos actualizados al puerto USB de la Soundbar. 2. Desconecte el cable de alimentación de la Soundbar, vuelva a conectarlo y luego encienda la Soundbar. NOTAS •• La actualización de firmware tal vez no funcione correctamente si los archivos de audio admitidos por la Soundbar están almacenados en el dispositivo de almacenamiento.
12 SOLUCIÓN DE PROBLEMAS Antes de buscar ayuda, controle lo siguiente. La Soundbar no se enciende. No sale ningún sonido del altavoz de graves. ;; Compruebe si el cable de alimentación de la Soundbar se insertó correctamente en el enchufe. ;; Compruebe si el indicador LED en la parte posterior del altavoz de graves está encendido en color azul. Vuelva a conectar la Soundbar y el altavoz de graves si el indicador parpadea lentamente en azul o está en rojo. (Consulte la página 7.
13 LICENCIA La Soundbar no se conecta mediante Bluetooth. ;; Cuando conecte un dispositivo nuevo, cambie a “BT PAIRING” para establecer la conexión. (Presione el botón PAIR del control remoto o presione el botón (Fuente) en el cuerpo de la Soundbar por al menos 5 segundos). ;; Si la Soundbar está conectada a otro dispositivo, primero desconéctelo para poder cambiarlo. ;; Vuelva a conectarlo después de quitar la lista de parlantes Bluetooth del dispositivo al que se quiere conectar.
[ENERGY STAR] ENERGY STAR qualified model only –– Your Samsung product is ENERGY STAR qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification. –– Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices. Refer to www.energystar.
16 ESPECIFICACIONES Y GUÍA Especificaciones Nombre del modelo HW-A450 USB 5V/0,5A Requisitos de electricidad (solo México) 110-127V ~50/60Hz (méxico sólo) Consumo de energía (solo México) 25W (méxico sólo) Peso 1,5 kg Dimensiones (An x Al x Pr) 860,0 x 54,0 x 74,0 mm Rango de temperatura de servicio +5 °C a +35 °C Rango de humedad de servicio 10 % a 75 % AMPLIFICADOR Potencia nominal de salida 40W x 2, 6 ohm Formatos de reproducción compatibles LPCM 2ch, Dolby Audio™ (El sonido DTS 2.
© 2021 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. Country Samsung Service Center Web Site ` Latin America MEXICO 800-SAMSUNG www.samsung.com/mx/support BRAZIL 0800 555 0000 (Demais cidades e regiões) 4004-0000 (Capitais e grandes centros) www.samsung.