HT-D6500W 5.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-D6500W_XAA_1226.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within Triangle Is awarning sign alerting you of dangerous voltage Inside the product. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these Instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Safety Information Precautions • Ensure that the AC power supply in your house complies with specifications listed on the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm / 20~25 inches). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product.
Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. Disc Storage • Do not keep in direct sunlight • Keep in a cool ventilated area • Keep in a clean protection jacket and store vertically.
Contents 2 3 4 5 5 5 Safety Warnings Important Safety Instructions Precautions Cautions on Handling and Storing Discs License Copyright GETTING STARTED 8 9 10 14 15 15 16 17 Key features of your new Blu-ray Home Theater Icons that will be used in manual Disc Types and Characteristics Accessories Description Front Panel Rear Panel Remote Control CONNECTIONS 19 22 23 24 26 27 Connecting the Speakers Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit Connecting External Devices/your
44 44 44 44 44 44 44 45 45 45 47 Security BD Parental Rating DVD Parental Rating Change Password General Front Display Light Effect Network Remote Control Support Software Upgrade Contact Samsung BASIC FUNCTIONS 48 48 49 49 50 50 51 53 55 56 57 58 58 58 59 60 61 Playing a Disc Using the Disc menu / Title menu / Popup menu Playing the Title List Using the Search and Skip Functions Slow Motion Play/Step Motion Play Repeat Playback Using the TOOLS button Listening to Music Sound Mode Playing back a Picture
Getting Started Key features of your new Blu-ray Home Theater Product Features 3D This product can play 3D contents through an HDMI cable. To implement the 3D effect, connect a 3D device (3D-compliant AV receiver, 3D-compliant TV) to the product using an HDMI cable, and play the 3D content while wearing 3D vision glasses. Wireless receiver module Samsung ’s rear-channel wireless receiver module does away with cables running between the product and rear-channel speakers.
01 Getting Started Icons that will be used in manual Make sure you understand the following terms before reading the rest of the user manual. Term Logo Icon h z Z BD-ROM BD-RE/-R DVD-VIDEO Definition Indicates a function available on a BD-ROM. Indicates a function available on a BD-RE/-R disc recorded in the BD-RE format. Indicates a function available on a DVD-VIDEO.
Getting Started Disc Types and Characteristics Logos of Discs that can be played Blu-ray Disc Compatibility Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual. Blu-ray Disc 3D Blu-ray Disc Dolby Digital Plus NTSC broadcast system in U.S.
01 BD-RE/-R Both the product and the discs are coded by region. These regional codes must match for the product to play the disc.If the codes do not match, the disc will not play. Blu-ray RE/-R discs can be recorded and played back. This product can play back a BD-RE/-R disc recorded by other compatible Blu-ray disc recorders.
Getting Started Disc Format Using JPEG discs • The home theater can play back D-R/-RW, DVD-RW/-R discs recorded in the UDF or JOLIET format. • Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed. • Progressive JPEG is supported. DVD-RW/-R (V) • This format is used for recording data on DVD-RW or DVD-R discs. This product can play DVD-RW or DVD-R discs if they have been finalized.
01 Container *.vro VRO VOB Video Codec Audio Codec Resolution MPEG2 AC3 MPEG LPCM 1920x1080 AC3 MPEG LPCM AAC 352x288 MPEG1 MPEG1 *.mpg *.mpeg MPEG2 PS H.264 1920x1080 1920x1080 AC3 AAC MP3 DD+ HE-AAC MPEG2 *.ts *.tp *.trp 352x288 H.264 TS VC1 Getting Started File Extension 1920x1080 1920x1080 1920x1080 Restrictions • • • • • Some of the Codecs listed above will not play if there is a problem with the contents.
Getting Started Notes on the USB connection Supported devices: USB storage media, MP3 player, digital camera, USB card reader 1) The product does not support folder or file names longer than 125 characters. 2) A subtitle file bigger than 300 KB may not be properly displayed. 3) Some USB/digital camera devices may not be compatible with the product. 4) The praoduct supports the FAT16 and FAT32 file systems. 5) Photo (JPEG), music (MP3,) and video files must have Korean or English file names.
01 Getting Started Description Front Panel 1 2 3 4 5 6 7 8 9 10 11 12 5V 500mA ASC IN 1 POWER BUTTON ( 2 FUNCTION BUTTON The mode switches as follows : BD/DVD D. IN AUX R. IPOD W. IPOD H. IN1 H. IN2 FM 3 4 5 6 DISPLAY Displays the playing status, time, etc. STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. ENTER BUTTON Selects menu items or starts a Blu-ray disc. (It will not start a DVD disc.
Getting Started Rear Panel 1 2 3 4 5 LAN iPod DIGITAL AUDIO IN HDMI OUT HDMI IN 6 7 8 9 10 COMPONENT OUT FM ANT 11 12 SPEAKERS OUT CENTER FRONT OPTICAL SUBWOOFER FRONT WIRELESS AUX IN VIDEO OUT SPEAKER IMPEDANCE : 3 1 LAN TERMINAL Can be used for network based services (see pages 62~71), BD-LIVE and software upgrade under the network connection. 2 iPod JACK Connect the iPod dock connector here.
01 Getting Started Remote Control Tour of the Remote Control FUNCTION TV SOURCE POWER Turn the product on and off. To change to TV mode, press the TV button. To change to Home Theater, press the BD button. Press numeric buttons to operate options. RECEIVER SLEEP BD TV 1 2 3 4 5 6 7 8 9 REPEAT 0 Press to see the full screen on a TV. Allows you to repeat a title, chapter, track or disc. Press to search backwards or forwards. Press to skip backwards or forwards. Press to stop/play a disc.
Getting Started Installing batteries in the Remote Control * Battery size: AAA TV Brand Code List Brand Code Brand Code Admiral (M.
02 Connections Connecting the Speakers Connections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. SW Position of the product Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Connections Speaker Components (L) (R) (L) (R) CENTER SURROUND FRONT SUBWOOFER SPEAKER CABLE SWA-5000 TX Card Wireless Receiver Module Speaker Cable (2EA) Removing/Installing the speaker stand * Front Speakers only Removing the Stand from the Speaker If you intend to attach the Front Speakers to the wall, you must remove the stands before attaching them. 1. Pull out the stand in the direction of the arrow as shown. • Be careful not to apply excessive force when removing the stand.
02 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab. 3. Connect the speaker wire plugs to the back of the product by matching the colors of the speaker plugs to the speaker jacks. 4. With the product turned off, insert the TX card into the TX Card Connection (WIRELESS) on the back of the product.
Connections ! CAUTION Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct. Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall through the duct (hole).
02 HDMI is the standard digital interface for connecting to devices such as a TV, projector, DVD player, Blu-ray player, set top box, and more. Connections Connecting External Devices/your TV via HDMI Because HDMI is all digital, you'll enjoy digital quality video and sound as it was originally created, without the distortions that can be caused when digital content is converted to analog.
Connections HDMI IN : Connecting to an External Component with an HDMI Cable 1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. 2. Press the FUNCTION button to select H. IN1 or H. IN2 input. The mode switches as follows : BD/DVD D. IN AUX R. IPOD W. IPOD H. IN1 H.
02 Blue Connections Red Green METHOD 1 COMPONENT OUT SPEAKERS OUT CENTER FRONT Yellow METHOD 2 SUBWOOFER FRONT AUX IN VIDEO OUT SPEAKER IMPEDANCE : 3 METHOD 1 : Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (PR, PB and Y) Jacks on the back of the product to the Component Video Input Jacks on your TV.
Connections Connecting Audio from External Components COMPONENT OUT FM ANT DIGITAL AUDIO IN HDMI OUT HDMI IN OPTICAL WIRELESS AUX IN Red VIDEO OUT S White Optical Cable (not supplied) Set-Top Box Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. VCR OPTICAL AUX OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1.
02 You can connect this product to a network and use network based services such Smart Hub and BDLIVE (See pages 62~71), as well as receive software upgrades through the network connection. We recommend using a wireless router or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Connections Connecting to a Network Cable Network 1.
Connections Wireless Network You can connect the home theater to your network through a wireless IP sharer (router). To set the network configuration options. see page 39. Broadband service Wireless IP sharer PC 5V 500mA ASC IN Networking with PC for AllShare function (See page 71) ✎ NOTE To use a wireless network, your product must be connected to a wireless IP sharer (router).
03 Setup 1. Turn on your TV after connecting the product. When you connect and turn on the product to a TV for the first time, the Initial Settings screen appears. Setup Initial Settings • Home Menu My Contents Videos Photos Music Function My Devices Internet Settings Initial Settings | On-Screen Language Select a language for the on-screen displays.
Setup 2. Press the ◄► buttons to select Settings, and then press the ENTER button. Accessing the Settings Menu DISC MENU MENU 3. Press the ▲▼ buttons to select the desired submenu, and then press the ENTER button. TITLE MENU POPUP 1 TOOLS INFO 4. Press the ▲▼ buttons to select the desired item, and then press the ENTER button. 3 5. Press the EXIT button to exit the menu.
03 You can configure various display options such as the TV Aspect Ratio, Resolution, etc. 3D Settings Screen Size Select whether to play a Blu-ray Disc with 3D contents in 3D Mode.
Setup TV Aspect (Picture Size and Format) BD Wise (Samsung Products only) Depending on the type of television you have, you may want to adjust the screen size setting. BD Wise is Samsung’s latest inter-connectivity feature. • 16:9 Original : Select when you connect the product to a 16:9 TV screen. The product will display all content in its original aspect ratio. Content formatted in 4:3 will be displayed with black bars on the left and right.
03 Setup Resolution according to the output mode • Blu-ray Disc/E-contents/Digital Contents playback HDMI / connected HDMI / not connected HDMI Mode Output Component Mode Blu-ray Disc E-contents/ Digital contents Component/ VIDEO Mode Blu-ray Disc E-contents/ Digital contents VIDEO Mode BD Wise Resolution of Blu-ray Disc 1080p@60F 480i - - - Auto Max. Resolution of TV input Max.
Setup ✎ NOTE If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
03 Speaker Settings Settings Speaker Settings Display Audio Network System | Level Setup Audio Distance If you cannot place the speakers at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, center, surround and subwoofer speakers. • You can set the Speaker Distance between 1ft (0.3m) and 30ft (9.0m).
Setup Musical Room Calibration By setting the Musical Room Calibration (MRC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment. ✎ NOTE Running the Musical Room Calibration function takes about 3 minutes.
03 The audio signals transmitted over the HDMI Cable can be toggled On/Off. • Off : Video is transmitted over the HDMI connection cable only, and audio is output through your product speakers only. • On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. ✎ NOTE HDMI Audio is automatically down-mixed to 2ch for TV speakers.
Setup Digital Output Selection Setup PCM Bitstream (Unprocessed) Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) HDMI supported HDMI supported HDMI supported HDMI supported AV receiver AV receiver AV receiver AV receiver Connection PCM Up to 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to 7.1ch Dolby Digital DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Plus Up to 7.
03 Setup Wired Network Audio Sync Video may fall out of sync with the audio when the product is connected to a digital TV. If this occurs, adjust the audio delay time to match the audio to the video. • You can set the audio delay time between 0 msec and 300 msec. Set it to the optimal status. Setting Up a Wired Connection - Auto 1. Press the ▲▼ buttons to select Wired. Settings Audio Network System Network Before you begin, contact your ISP to find out if your IP address is static or dynamic.
Setup To enter the Network settings into your product, follow these steps: Wireless Network 1. Press the ▲▼ buttons to select Wired, and then press the ENTER button. • Wireless (General) 2. Press the ◄► buttons to select IP Settings, and then press the ENTER button. • One Foot Connection IP Settings Display IP Mode Network IP Address System Subnet Mask Language Security Manual 0 . 0 . 0 . 0 0 . 0 . 0 . 0 0 . 0 . 0 . 0 Gateway DNS Mode Manual 0 . 0 . 0 .
03 Settings Display Audio Network Settings Enter security key. 0 entered To enter the Network settings into your product, follow these steps: Setup 4. On the Security screen, enter your network’s Pass Phrase. Enter numbers directly using your remote control. To select a letter, press the ▲▼◄► buttons to move the cursor, then press the ENTER button. 1. Follow Steps 1 through 5 in the ‘Setting Up the Wireless Network Connection - Auto’ procedure. 2.
Setup WPS(PBC) 2. Press the ENTER button. The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function. If your wireless router has a WPS(PBC) button, follow these steps: 1. Press the ▲▼ buttons to select WPS(PBC). Settings Network Settings Display Select a network connection type. Audio Network 3. Place the Samsung Wireless Router within 25 cm (10 inches) of Samsung Wireless LAN Adapter to connect. 4.
03 Initial Settings By using the Initial Settings function, you can set the language, Musical Room Calibration, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual. (See page 29) Anynet+ (HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this product to a Samsung TV with an HDMI cable.
Setup Language You can select the language you prefer for the Home menu, disc menu, etc. • On-Screen Menu : Select the language for the on-screen displays. • Disc Menu : Select the language for the disc menu displays. • Audio : Select the language for disc audio. • Subtitle : Select the language for disc subtitles. ✎ NOTE The selected language will only appear if it is supported on the disc. Change Password Change the 4-digit password used to access security functions. If you forgot your password 1.
03 The four methods are explained below. The Network Remote Control function lets you control your Blu-ray Home Theater from a remote device such as a smart phone through a wireless connection to your local area network. By Internet To use the Network Remote Control function, follow these steps: 1. Select On in the Network Remote Control menu. 2. Install the Samsung network remote control application to control your product on your compatible portable device. 3.
Setup By USB To upgrade by USB, follow these steps: 1. Visit www.samsung.com/bluraysupport 2. Download the latest USB software upgrade zip archive to your computer. 3. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file. 4. Copy the folder to a USB flash drive. 5. Make sure the disc tray is empty, and then insert the USB flash drive into the USB port of the product. 6. In the product’s menu, go to Settings > Support > Software Upgrade. 7. Select By USB.
03 Setup Download in Standby Mode You can set the Download in Standby Mode function so that the product downloads new upgrade software when it is in Standby mode. In Standby mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it. To set Download in Standby Mode, follow these steps: 1. Press the ▲▼ buttons to select Download in Standby Mode, and then press the ENTER button. 2. Select On or Off.
Basic Functions • Audio CD (CD-DA) Playing a Disc track 1 track 2 track 3 track 4 track 5 Playback 1. Insert a disc into the disc slot with the disc's label facing up. 2. Press the PLAY (►) button. folder (group) 1 file 1 file 2 Playback related buttons PLAY ( ►) Starts playback. STOP ( ) Stops playback. • If you press the button once : The stop position is memorized. • If you press the button twice : The stop position is not memorized.
04 Using the Search and Skip Functions Z 1. During playback, press the TITLE MENU button on the remote control. 2. Press the ◄ ► buttons to make the desired selection, then press the ENTER button. TITLE MENU POPUP Searching for a Desired Scene hzZyx ✎ NOTE Depending on the disc, the menu items may differ and this menu may not be available. The Title Menu will only be displayed if there are at least two titles on the disc. Using the Popup Menu h 1.
Basic Functions Slow Motion Play/Step Motion Play Repeat > Off Slow Motion Play hzZyx • In pause ( ) mode, press the SEARCH () button. If you press the SEARCH () button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 • To return to normal speed playback, press the PLAY (► ) button. ✎ NOTE The product does not play sound in slow 3. To return to normal play, press the REPEAT button again. 4. Press the ▲▼ buttons to select Off, then press the ENTER button.
04 During playback, you can operate the disc menu by pressing the TOOLS button. TOOLS • TOOLS Menu Screen Tools Title Search Chapter Search Time Search Picture Settings Audio User EQ Subtitle Angle 1/2 : 1/20 : 00:00:13/01:34:37 : Normal : 1/4 ENG Multi CH : : audio modes will be also displayed if the Bluray Disc has a BONUSVIEW section. Use the ◄► button to switch between primary and secondary audio modes. The languages available depend on the languages that are encoded on the disc.
Basic Functions Caption Function x • You must have some experience with video extraction and editing in order to use this feature properly. • To use the caption function, save the caption file (*.smi) with the same file name as that of the DivX media file (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi • You can use up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
04 7 ENTER button : Plays the selected track. 8 ► button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist. ◄ button : During playback, moves to the previous page in the Music List or moves to the previous track in the Playlist. ow Buttons on the Remote Control used for Music Playback @ 1 2 3 9 STOP button : Stops a track. 4 5 6 0 $ button : Plays the next track. 7 8 ! # button : Plays the previous track.
Basic Functions Playing an Audio CD (CD-DA)/MP3 Repeat an Audio CD (CD-DA)/MP3 1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc slot. • For an Audio CD (CD-DA), the first track will be played automatically. • For an MP3 disc, press the ◄► buttons to select Music, then press the ENTER button. 1. During the Playlist playback, press the REPEAT button. Audio CD (CD-DA)/MP3 Screen Elements 1 2 3 REPEAT 2. Select the desired play mode by pressing the REPEAT button repeatedly.
04 1/2 Page Selected Items : 3 TRACK 001 TRACK 002 00:43 03:56 TRACK 003 TRACK 004 04:41 04:02 TRACK 005 TRACK 006 03:43 03:40 TRACK 007 TRACK 008 04:06 03:52 Close Edit Mode ( ) Page Tools " Select ' Return 5. When done, press the TOOLS button. 6. To play the selected track(s), select Play Selected in the Tools menu, and then press ENTER.
Basic Functions The models below support audio sync Dolby Pro Logic II Mode settings. Press iPod SYNC on the remote control to change audio delay. Supported Models : classic/3G nano/4G nano/120GB classic/160GB Classic/5G nano You can select the desired Dolby Pro Logic II audio mode. Press the PL II button. MUSIC When listening to music, you can experience sound effects as if you are listening to the actual performance. MOVIE Adds realism to the movie soundtrack.
04 During the slide show playback, you can use various function by pressing the TOOLS button. Playing back a USB Storage Device F TOOLS Tools Pause Slide Show Slide Show Speed : Normal Slide Show Effect : Blind Background Music : Off Background Music Setting Zoom Rotate Picture Settings Information You can use the USB connection to play multimedia files (MP3, JPEG, DivX, etc) downloaded from the USB storage device. 1. Basic Functions Using the TOOLS button Move to the home menu.
Basic Functions Listening to Radio Using buttons on the Remote Control 1. Press the FUNCTION button to select FM. 2. Tune in to the desired station. • Preset Tuning 1 : You must first add a desired frequency as a preset. Press the STOP () button to select PRESET and then press the ) button to select the preset TUNING/CH ( station. • Manual Tuning : Press the STOP () button to select MANUAL and then press the TUNING/ ) button to tune in to a lower or higher CH ( frequency.
04 My Contents Videos ✎ NOTE Connected Device Photos iPod Function Music My Devices You must have the VIDEO output Internet Settings " Enter ' Return d WPS(PBC) 1. Connect the iPod dock connector to the iPod Jack on the rear panel of the product. 2. Place the iPod in the supplied iPod Dock. • Your iPod automatically turns on. • The “iPod” message appears on the TV screen. 3. Press the ENTER button. 4. Press the ◄▲▼ buttons to select Music, and then press the ENTER button. 5.
Basic Functions How to charge the Wireless Transmitter LIN STA N K STA CH ARG DB Y NDB Y E CH AR GE 1. Connect the Wireless Transmitter to the Charging Cradle. 2. Connect the DC power adapter to a wall socket. • The charging indicator lights and charging starts. After the battery is fully charged, the charging indicator turns Green. Operation status of the charging cradle's LED Display Function GREEN LED ON Power on /Charging completed RED LED ON Charging.
04 the product is not guaranteed. We recommend playing contents downloaded to the iPod. Basic Functions Playback of applications' contents through Operation status of the wireless transmitter's LED If you have a problem using your iPod, please visit www.apple.com/support/ipod LIN How to Link the Wireless Transmitter with the Main Unit K STA ND BY 1. Turn off your Home Theater. 2. Press the 4, 7, 6, 3 buttons on the remote control in order. • The Power LED blinks once. 3.
Network Services You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the product to your network. Read the following instructions before using any network service. 1. Connect the product to the network. (see pages 27~28) 2. Configure the network settings. (see pages 39~42) 3. The Smart Hub screen appears. ✎ NOTE Certain applications are available only in certain countries. 4. The Terms of Service Agreement screen appears.
05 1 2 3 4 6 Navigation Help : Displays the remote control buttons you can use to navigate in Smart Hub. • RED (A) : To log in to Smart Hub. • GREEN (B) : To sort the applications. • YELLOW (C) : To edit the applications. • BLUE (D) : To change the settings of Smart Hub. 7 My Applications : Displays your personal gallery of applications which you can add to, modify, and delete.
Network Services Using the Keypad Creating an Account Through your remote, you can use the OnScreen Keypad to enter letters, numbers, and symbols. To establish your own, exclusive, configuration of Smart Hub, create your own Smart TV Account. To create an account, follow these steps: 1. 1 2 1 2 3 .
05 When done, press the ENTER button to select OK, and then press the ENTER button again. The Login screen re-appears. 2. Select the Down Arrow next to the Smart TV ID field, and then press the ENTER button. 9. Select Confirm password, and then press the ENTER button. 3. Select your ID from the list that appears, and then press the ENTER button. The Login screen re-appears. 4. Select Password, and then press the ENTER button. The Password window and a keypad appears. 5.
Network Services Register Service Account If you have existing accounts with any of the providers listed by the Register Service Account function, you can associate the provider account and the provider account password with your Smart TV Account. If you associate the account, you will be able to log onto the account through Smart Hub easily, without entering your account name or password. To use the Register Service Account function, follow these steps: 1.
05 4. After a few moments, Smart Hub automatically resets. The screen may go black, then Smart Hub re-appears. In a few moments, it starts the re-initialization procedure. To complete the re-initialization, go to Step 4 in Starting Smart Hub for the First Time. (See page 62) ✎ NOTE The functions in the Edit Mode Menu bar are described below. ✎ NOTE Some menu items may not appear on the screen.
Network Services Move to Folder Rename Folder The Move to Folder function lets you move a application to a folder. To use the Move to Folder function, follow these steps: The Rename Folder function lets you rename folders. To use the Rename Folder function, follow these steps: 1. Press the YELLOW (C) button on your remote. 1. Press the YELLOW (C) button on your remote. 2. Select a application, and then press the ENTER button. 2. Press the ▲▼◄► to select a folder, and then press the ENTER button.
05 Samsung Apps 1. Press the YELLOW (C) button on your remote. 2. Press the ▲▼◄► to select a locked application, and then press the ENTER button. 3. Press the ▲▼◄► to select Unlock, and then press the ENTER button. The Security window appears. 4. Enter the Parental Security Code (See page 44). If you have not created a Parental Security Code, enter 0000. Additional applications and services are added regularly. 5. Press the ENTER button.
Network Services Using the Samsung Apps Screen Samsung Apps by category To use the Samsung Apps screen, follow these steps: The following categories are available: 1. Press the ◄► buttons to move to the category list on the left. 2. Press the ▲▼ to highlight a category. In a few seconds, the Samsung Apps screen displays the applications in that category. The Sort tabs appear across the top. 3. Press the ► button to move to the displayed applications or services. 4.
05 • RED (A) (Login) : To log into your Smart TV Account. • GREEN (B) (Thumbnail/List View) : To toggle applications between Thumbnail and List view. • BLUE (D) (Sort By) : To sort the applications in a category by Recommended, Most Downloaded, Most Recent, or Name. • Return : To return to the previous menu. ✎ NOTE The Internet contents services may be added or deleted by providers without notice. For instructions to use Your Video or Search Function, please visit www.samsung.
Other Information Troubleshooting Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect.
06 Check/Remedy Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The product is not working. (Example: The power goes out or a strange noise is heard.) • Press and hold the romote control's STOP ( ) button for 5 seconds in STANDBY mode. • The Product is not working normally.
Other Information Symptom Check/Remedy PC Share Manager function I can see folders shared through the PC Share Manager, but I cannot see the files. • Since it shows only files corresponding to the Image, Music, and Movie categories, files that do not correspond to these categories may not be displayed. AllShare function Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded.
06 0~9 2D3D 3D Settings 3D Sound D 48 31 56 A Accessories Ad-hoc AllShare Anynet+ (HDMI-CEC) Audio Audio Language Audio Return Channel Audio Sync 14 28 71 43 35 51 37 39 B Background Music BD-LIVE BD Data Management BD Parental Rating BD Wise BONUSVIEW Digital Output Disc menu Disc Structure Display DivX® Video On Demand Dolby Pro Logic ll Mode DSP DVD Parental Rating Dynamic Range Control 52 44 19 19 21 23 23 24 25 25 26 26 26 27 27 28 47 37 48 48 31 43 56 55 44 38 F Front Display 44 G 44 H HD
Other Information Specifications Power Requirements General FM Tuner 70 W Weight 7.7 Ibs Dimensions 16.9 (W) x 2.3 (H) x 12.8 (D) inches Operating Temperature Range +41°F to +95°F Operating Humidity Range 10 % to 75 % Signal/noise ratio 55 dB Usable sensitivity 12 dB Total harmonic distortion 0.5 % BD (Blu-ray Disc) DVD (Digital Versatile Disc) Disc AC 120V, 60Hz Power Consumption CD : 5 inches (COMPACT DISC) CD : 3 1/2 inches (COMPACT DISC) Composite Video Reading Speed : 9.
06 Speaker Front Surround Center Subwoofer Impedance 3Ω 3Ω 3Ω 3Ω Frequency range 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz Output sound pressure level 87dB/W/M 87dB/W/M 87dB/W/M 88dB/W/M Rated input 165W 165W 170W 170W Maximum input 330W 330W 340W 340W Dimensions (W x H x D) Front : 3.54 x 13.17 x 2.7 inches (Stand base : 4.29 x 3.86 inches) Surround : 3.54 x 5.57 x 2.7 inches Center : 14.17 x 2.93 x 2.7 inches Subwoofer : 6.61 x 13.78 x 11.
English Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be in interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com.
Français Avis de Cinavia : Ce produit utilise la technologie Cinavia pour limiter l'utilisation de copies non autorisées de certains films et vidéos commerciaux ainsi que leurs bandes son. Lorsqu'une copie non autorisée est détectée, un message est affiché et la lecture ou la copie est interrompue. Des informations complémentaires concernant la technologie Cinavia sont disponibles sur le site http:// www.cinavia.com du Centre d'information consommateur Cinavia.
Suomi Cinavia-ilmoitus: Tämä tuote käyttää Cinaviatekniikkaa rajoittaakseen joidenkin kaupallisesti tuotettujen elokuvien ja videoiden sekä niiden ääniraitojen luvattomien kopioiden käyttöä. Kun luvattoman kopion kielletty käyttö tunnistetaan, viesti tulee näkyviin ja toisto tai kopiointi keskeytetään. Saat lisätietoja Cinavia-tekniikasta Cinavia Online Consumer Information Centre -kuluttajakeskuksesta osoitteessa http://www.cinavia.com.
Polski Komentarz Cinavia : Urządzenie to korzysta z technologii Cinavia w celu ograniczenia wykorzystania nieupoważnionych kopii pewnych filmów i obrazów wideo wyprodukowanych w celach komercyjnych, oraz ich ścieżek dźwiękowych. W przypadku wykrycia zakazanego użycia nieautoryzowanej kopii, zostanie wyświetlony komunikat i proces odtwarzania i kopiowania zostanie zatrzymany. Więcej informacji o technologii Cinavia można uzyskać w Centrum obsługi klienta Cinavia online: http:// www.cinavia.com.
Hrvatski Obavijest o tehnologiji Cinavia : ovaj proizvod rabi tehnologiju Cinavia kako bi se ograničila uporaba neovlaštenih kopija nekih komercijalno proizvedenih filmova i videozapisa i njihovih zvučnih zapisa. Kada se otkrije zabranjena uporaba neovlaštene kopije, prikazat će se poruka i prekinut će se reproduciranje i kopiranje. Ostale informacije o tehnologiji Cinavia dostupne su u mrežnom informacijskom centru za korisnike tvrtke Cinavia na http://www.cinavia. com.
繁體中文 Cinavia 聲明:本產品使用 Cinavia 技術來限制 使用某些商業製造的電影和視訊及其聲道的未經授權副本。當偵測 到禁止使用的未經授權副本時,將會顯示一則訊息,並且播放或複 製動作將會中斷。 Cinavia 技術的詳細資訊在 Cinavia 線上消費者資訊中心中提供,網址為:http://www. cinavia.com。若要透過郵件請求關於 Cinavia 的其他資訊,請將含有您的郵寄地址的明信片寄往:Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA.
Tiếng Việt Thông báo của Cinavia: Sản phẩm này sử dụng công nghệ Cinavia để hạn chế việc sử dụng các bản sao trái phép một số bộ phim và video được sản xuất thương mại và các đoạn âm thanh của chúng. Khi bị phát hiện sử dụng bản sao trái phép, một thông báo sẽ được hiển thị và việc phát lại hoặc sao chép sẽ bị gián đoạn.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area ` North America Canada Mexico U.S.A Contact Center Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (7267864) www.samsung.com/us Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-2112 Code No. AH68-02323R HT-D6500W_XAA_1226.