Instruction Manual

4140
Presetting Radio Stations
You can preset up to 30 FM and AM stations.
Press TUNER button.
• Each time you press this button, FM ➝ AM will be selected in turn.
Press Select button and then TUNING MODE button
to select 89.10.
• Refer to step 2, page 40, to tune in automatically and manually.
Press TUNER MEMORY button.
• Tuner number will blink on the display.
Press TUNING/CH( ) button to select preset 2.
• You can select from presets 1 to 30.
Press TUNER MEMORY button.
• Tuner number will disappear and station 89.10 will be saved in preset 2.
To preset other stations, repeat steps 2 to 5.
To Listen to Preset Station
• Press TUNING MODE button of the remote control to select the PRESET and press
TUNING/CH ( ) button.
Ex) Setting station FM 89.10 in preset 2 .
REMOTE CONTROL
1
2
4
5
6
3
,
,
RADIO OPERATION
Listening to Radio
You can listen to the chosen band (FM, AM) by using either automatic or manual tuning.
Press TUNER button.
• Each time you press this button, FM ➝ AM will be
repetitively selected.
Select frequency.
•
Automatic Tuning 1
:
1) Press TUNING MODE button to select PRESET.
2) Press TUNING/CH ( ) button to select the preset
frequency.
• Automatic Tuning 2 :
1) Press TUNING MODE button to select MANUAL
2) Press and hold TUNING/CH ( ) button to
automatically tune in frequency.
• Manual Tuning :
1) Press TUNING MODE button to select MANUAL.
2) Press TUNING/CH ( ) button briefly to increase or
decrease the frequency step by step.
Press FUNCTION button to select
FM or AM.
Select the frequency.
• Automatic Tuning :
Press and hold TUNING( ) button to
automatically tune in frequency.
•
Manual Tuning
:
Press TUNING( ) button briefly to
increase or decrease the frequency step by step.
To Listen to Mono/Stereo
Press MO/ST button on the remote.
• Each time you press this button, STEREO, MONO
will be selected in turn.
• If you select MONO in the area with weak reception,
it will help to reduce noise.
• This function works only with the Remote Control.
REMOTE CONTROL MAIN UNIT
1
2
1
2
,
,
,
,
,
How to select PRESET and MANUAL
on the main unit.
1. Press the SETUP button.
2. Press the FUNCTION button 9 times.
• “TUNER SETUP” appears in the display.
3. Press the SURROUND button.
4. SELECT ( ) button to select MANUAL
or PRESET.
,