Datasheet
Mobile SATA
Spinpoint MP2
250GB 200GB 160GB 120GB 100GB 80GB
Non-FFS HM250JJ HM200JJ HM160JJ HM120HJ HM100HJ HM080HJ
FFS HM251JJ HM201JJ HM161JJ HM121HJ HM101HJ HM081HJ
FEATURES
• Max. 125GB formatted capacity per disk • ATA Security Mode Feature Set
• SATA Native Command Queuing Feature • ATA S.M.A.R.T. Feature Set
• TuMR/PMR head with FOD technology • SilentSeek™
• Serial ATA 3.0Gbps Interface Support • NoiseGuard™
• Load/Unload Head Technology • Free Fall Sensor(optional)
Ca
p
acit
y
1
80GB/100GB/120GB/160GB/200GB/250GB
Temperature
Interface
SATA 3.0Gbps Operating
5 ~ 55 ℃
Buffer DRAM Size
2
16 MB Non-operating
-40 ~ 70 ℃
Byte per Sector
512
Humidity (non-condensing)
Rotational Speed
7,200 RPM Operating 5 ~ 90 %
Non-operating 5 ~ 95 %
Linear Shock (1/2 sine pulse)
Average Seek time (typical)
11ms Operating(2ms) 325 G
Average Latency
4.17 ms Non-operating(1ms) 900 G
Data Transfer Rate Vibration
Media to/from Buffer (Max.) 1.1 Gbits/s Operating(Random,10~500Hz) 0.7Grms
Buffer to/from Host (Max.) 300MB/s
Altitude (relative to sea level)
Drive Read
y
Time
(
t
yp
ical
)
3
4 sec Operating -300 to 3000 m
Non-operating -400 to 15000 m
Non-recoverable Read Error
1 sector in 10
14
bits
Controlled Ramp Load/Unload
600,000
Height (Max.)
9.5 mm
Width
69.85 mm
Idle
80,100,120GB : 2.4Bel
Length
100 mm
160,200,250GB : 2.6Bel
Weight (avg.)
115 g
Performance Seek
80,100,120GB : 2.6Bel
160,200,250GB : 2.8Bel
* Note : Design and specifications are subject to change without prior notice.
1.1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes
Accessible capacity may vary as some OS uses binary numbering system
Voltage +5V±5%
for reported capacity
Spin-up Current (Max.) 1000 mA
2. A small portion of the 16MB buffer memory is reserved for firmware use.
Seek
(
av
g
.
)
4
2.65 W
3. Power-On to Drive Ready
Read/Write (avg.) 2.55 W
4. 30% duty cycle, random seek
Low Power Idle (avg.) 0.8 W
※. Unless otherwise specified, specifications are for 250GB configuration
Standby (avg.l) 0.25 W
Sleep (avg.) 0.20 W
2.5" HDD product specification Rev 0.2
Match with product Manual Rev 01
ENVIRONMENTAL SPECIFICATIONS
PERFORMANCE SPECIFICATIONS
RELIABILITY SPECIFICATIONS
PHYSICAL DIMENSION
POWER REQUIREMENTS
ACOUSTICS
Capacity
DRIVE CONFIGURATION
Model