LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model [HG673-ZA]Install Guide-ENG.indd 1 Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Introduction This TV B2B (Business to Business) model is designed for the hospital or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls. Operational Modes This TV has two modes : Interactive and Stand-alone mode.
Contents yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy Introduction............................................................................................................................................................... 2 Operational Modes.................................................................................................................................................... 2 Still image warning.............................................................................................
Accessories ✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎The items’ color and shape may vary, depending on the model. List of Parts yy Safety Guide / Quick Setup Guide (Not available in all locations) yy Power Cord Using the TV's Controller The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control.
The Connection Panel 1 HDMI IN 2 (DVI) 1 HDMI IN 1 0 1 9 PILLOW OUT HOSPITALITY TV HDMI IN 3 DVI AUDIO IN 2 USB (5V 0.5A) / CLONING DATA AV IN VIDEO EX-LINK DIGITAL AUDIO OUT (OPTICAL) 3 AUDIO AUDIO OUT 4 5 ANT IN AIR/CABLE 6 7 8 ✎✎Whenever you connect an external device to your TV, make sure that the TV and the device are turned off. ✎✎When connecting an external device, match the color of the connection terminal to the cable.
Connecting the TV to a SBB or STB of a SI vendor TV Rear Panel HDMI IN 3 ETH MODEM DIO IN Data Cable DATA 1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. ✎✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type. 6 English [HG673-ZA]Install Guide-ENG.
Connecting a Pillow Speaker (NB673 Models only) You can connect a pillow speaker to the TV in the hospital using a jumper cable. The speaker functions as a remote control and speaker. TV Rear Panel Jumper Cable PILLOW OUT Pillow Speaker 1. Connect the pillow speaker jumper cable (cable sold separately) from the television's PILLOW SPEAKER Port to the pillow speaker jack on the wall behind the television.
¦¦ List of SI Vendors and Compatible Data Cables Supplied with the TV yy Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables. yy Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV. Confirm the code on the Code Label Note the labeled end. Note the labeled end.
¦¦ Connecting the Audio Output to an Audio Amplifier AUDIO IN Audio Amplifier TV Rear Panel EX-LINK AUDIO OUT 1 Stereo cable 1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable. English [HG673-ZA]Install Guide-ENG.
Connecting the RJP (Remote Jack Pack) Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV. 3H DMI cable TV Rear Panel USB HDMI S-VIDEO RCA PC/AUDIO RS/232 RJP Rear HDMI IN 2 (DVI) PILLOW OUT HDMI IN 1 1P C Audio cable HDMI IN 3 DVI AUDIO IN USB (5V 0.5A) / CLONING AV IN VIDEO 2V ideo / Audio Cable EX-LINK DIGITAL AUDIO OUT (OPTICAL) AUDIO AUDIO OUT 4 1. 2. 3. 4.
yy RJP (Remote Jack Pack): The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding Active/Inactive sources. –– A group of hospital menu items let you assign numbered priorities to the jacks of the RJP. (See page 14). 1 is the highest priority and 3 is the lowest.
Setting the Hospital Option Data To let you control how the TV functions when in Hospital mode, the TV has two Hospital mode menus, the Stand-alone mode menu and the Interactive mode menu. The menu items that differ between the menus are listed below. Menu items in the Stand-alone mode only: –– SI Vendor : SSCP –– REACH Server and its submenus. Menu items in the Interactive mode only: –– SI Vendor: Samsung and other vendors. All other items appear in both menus.
¦¦ Menu Items To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any changes you made are saved. Menu Item Hospitality Mode Hospitality Mode Standalone SI Vendor SI Vendor Samsung Power On Channel EN Last Saved Power On Channel Channel Type Power On Volume EN Power On Power On Volume Min Volume Max Volume initial Value 3 ... Last Saved ...
Menu Menu OSD Operation Clock Music Mode External Device External Source Pillow Spekaer 14 Item Picture Menu Lock initial Value Menu Display ON Panel Button Lock Unlock Mute on CC OFF Local Time Manual Music Mode AV OFF Music Mode Backlight OFF 7610 Priority AV 1 7610 Priority PC 2 7610 Priority HDMI 7610 AV Option RJP HDMI Option HDMI Music Mode OFF 3 AV HDMI1 OFF USB Media Mode Default External Source Banner ON Auto Source OFF Pillow Spekaer Type CZ Speaker Select Mai
Menu Item Eco Solution Energy Saving Logo/ Message Welcome Message Edit Welcome Message Hospitality Logo Hospitality Logo DL Cloning Logo Display Time Clone TV to USB Clone USB to TV Setting Auto Initialize REACH Server update Time REACH Server REACH Update Immediate REACH Server Channel REACH Server Version REACH Server Group ID S-LYNK REACH S-LYNK REACH Volume IPG Room Type TICKER initial Value Description OFF Adjusts the brightness of the TV to reduce power consumption.
Menu Item CAS initial Value Pro:idiom Self Diagnosis PI AES Data 0xD279 Self Diagnosis for TV Service Self Diagnosis for HTV Upgrade Now Service Pattern ATV Cable AGC Gain DTV Cable AGC Gain TV reset 32GRAY Default Default Description Configures CAS support. Applies to only the NB673, NB677, and NB678 models. OFF : Turns off CAS support. LYNK DRM : Select to turn on S-LYNK DRM CAS support only. Pro:idiom : Select to turn on Pro:Idim CAS support only.
¦¦ Welcome Message The Welcome Message feature displays a custom message on the TV every time it is turned on. –– Welcome message settings are in the Hospital Option Menu. –– Set Welcome Message to ON to display the message when the TV is powered on. Welcome Message OFF Edit Welcome Message Hospitality Logo OFF Hospitality Logo DL ... Logo Display Time ... –– You can make the Welcome Message up to 25 characters long and edit it in the Hospital Service menu.
¦¦ Hospitality Logo The Hospitality Logo function displays the Hospital's picture image when the TV is initially powered on. –– Hospitality Logo settings are in the Hospital mode menus. –– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. –– If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
¦¦ USB Cloning The USB Cloning function lets you download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hospital Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard array of settings and distribute that standard array to all the TVs in your facility. yy Cloning from TV to USB: Copies stored menu settings from a TV to a USB device. 1. Insert a USB drive into the USB port on the rear of the TV. 2.
yy Settings Cloned in the Hospital Menu Menu Item Cloning Support Applicable Region Hospitality Mode Yes All SI Vendor Yes All except Brazil Power On Channel EN Yes All Power On Channel Yes All Channel Type Yes All Power On Volume EN Yes All Power On Volume Yes All Min Volume Yes All Max Volume Yes All Power On Source Yes All Power On Option Yes All Channel Setup N/A All except Hospital Channel Editor N/A All Channel Bank Editor N/A Smooovie SI and Hospital Chann
RJP HDMI Option Yes All HDMI Music Mode Yes US and US Hsopital Sound Bar Out Yes All Video Out Yes ASIA Models only USB Media Mode Yes US and EU External Source Banner Yes All Auto Source Yes All Anynet+ Return Source Yes All Models except Hospital Sub Amp Mode Yes All except US Sub Amp Volume Yes All except US Pillow Speaker Type Yes Hospital Models Only Speaker Select Yes Hospital Models Only Pillow Volume Yes Hospital Models Only Energy Saving Yes All Energy Savi
¦¦ Multi Code Remocon A Multi Code Remocon is a special remote which is designed to control multiple TVs. This function is useful where there is more than one TV in a location. You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are displayed on each TV's OSD. The Initial ID code for each TV is “0”. –– You can set and reset the ID code in Analog TV mode or PC mode. (Not available in DTV mode.) –– You can set the ID code to any digit from 0 to 9.
¦¦ Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hospital side menu settings: Picture, Sound, Input, Channel, Setup, and Hospital Setup. This lets you set nearly all the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example - the Picture menu they can change the settings in those menus so they are no longer standard.
¦¦ Hospitality Plug & Play The Hospitality Plug & Play function, which automatically performs the Hospital mode selection, Country Setup, Clock Setup, and Picture mode Setup, runs once when power is first turned ON. Setup also runs automatically after you have executed a Service Reset. CAS If you select Factory Reset, the TV resets all values to their factory defaults and then displays the Hospital Plug & Play menu. Go to the first Hospital Plug & Play screen below.
yy Hospitality Plug & Play OSD –– Initially highlighted: Interactive –– If you select the Standalone Only button, the Standalone hospital mode is set by default and the “Standalone mode is set” OSD appears for 3 seconds. TV enters RF mode automatically after displaying the “Standalone mode is set” OSD for 3 seconds. –– If you select the Interactive mode, the Interactive Setup Menu is displayed. Press the power off key to exit from the Interactive menu.
¦¦ USB Software Upgrade Method Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at 1-866-8940524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV. When the software is upgraded, video and audio settings you have made will return to their default (factory) settings.
¦¦ Channel Bank Editor The Channel Bank Editor lets you control the channels the patient (or the guest) have access to. The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each bank. You can control access to channels by setting the item of Channel Bank Service Level in Hospitality Option Menu. Setting the Channel Bank Editor under Stand-alone Mode 1. 2. 3. 4. Press MUTE+1+1+9+ENTERE on the remote to enter the Hospital Standalone menu.
¦¦ Channel Editor The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can: –– Change the channel numbers and names, and sort the channels in your desired channel number order. –– Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen.
The picture below shows a sample Channel Editor screen.
When you press the TOOLS button, the following menu is available.
The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below. In the example, there are two external sources connected to the TV, HDMI2 (DVI) and AV. –– You can assign a new analog channel to an external source by selecting the source on the last page, pressing the TOOLS button, selecting Edit Channel Number, and then using the up or down arrow button on the remote to select the channel number of the analog channel.
Installing the Wall Mount Wall or Ceiling Mounting If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product. Installing the Wall Mount Kit The wall mount kit (sold separately) lets you mount the TV on the wall. For detailed information about installing the wall mount, see the instructions provided with the wall mount.
Caution of the cover-jack CAUTION: The cover-jack is for use by qualified service personnel only. To reduce the risk of electric shock or fire hazard, do not use the cover jack, unless you are qualified to do so. TV Rear Panel Cover-jack ✎✎The rear panel may differ depending on the model. English [HG673-ZA]Install Guide-ENG.
Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Model Name 50°F to 104°F(10°C to 40°C) 10% to 80%, non-condensing -4°F to 113°F(-20°C to 45°C) 5% to 95%, non-condensing HG28NB673 Display Resolution Screen Size (Diagonal) Sound (Output) Dimensions (WxHxD) Body Weight HG32NB673 1366 x 768 28" Class (28.0" measured diagonally) 32" Class (31.5" measured diagonally) 5W x 2 10W x 2 25.3 X 15.1 X 1.9 inches (645.0 X 384.9 X 49.
Dimensions HG28NB673 ▪▪ Front view / Side view 5 1 7 2 1 4 3 2 4 3 5 (Unit: inches) 1 2 3 25.3 23.9 13.6 6 4 5 15.1 1.9 ▪▪ Jack panel detail / Rear view 1 5 2 6 4 3 (Unit: inches) 1 2 3 4 5 6 5.4 3.0 3.9 16.2 3.9 3.9 5 1 6 2 4 3 [HG673-ZA]Install Guide-ENG.
2 4 3 5 HG32NB673 ▪▪ Front view / Side view 5 1 6 2 4 3 1 5 2 6 4 3 (Unit: inches) 1 2 3 4 5 29.0 27.6 15.6 17.1 1.9 ▪▪ Jack panel detail / Rear view 5 1 6 2 4 3 (Unit: inches) 36 1 2 3 4 5 6 7.8 4.7 4.0 19.1 7.8 7.8 English [HG673-ZA]Install Guide-ENG.
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
¦¦ License Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Premium Sound | 5.1 is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
¦¦ NOTE TO CABLE TV INSTALLER This reminder is provided to call the cable TV system installer's attention to Article 820–40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. ¦¦ MAINTENANCE AND SERVICING Never remove the back cover of the TV; this can expose you to high voltage and other hazards.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Samsung Hospitality Hotline: 866-894-0524 Web site: http://www.samsung.com/us/business [HG673-ZA]Install Guide-ENG.
This page is intentionally left blank. [HG673-ZA]Install Guide-ENG.
