DUAL BAND GPRS Series SGH-e316 Portable Digital Telephone User Manual Please read this manual before operating your phone, and keep it for future reference. Printed in Korea Code No.: GH68-05083A English.05/2004. Rev. 1.0 E316UEDE1.E32.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating thereto (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Samsung Telecommunications America, L.P. U. S. Headquarters: 1301 East Lookout Drive Richardson, TX 75082 Tel: 972-761-7000 Fax: 972-761-7001 Customer Care Center: 1601 E. Plano Parkway Suite 150 Plano, TX 75047 Tel: 888-987-HELP (4357) Fax: 972-761-7501 Internet Address: http://www.samsungusa.com/ wireless ©2004 Samsung Telecommunications America, L.P. All rights reserved. No reproduction in whole or in part allowed without prior written approval.
Table of Contents Important Safety Precautions......................... 7 Unpacking ...................................................... 9 Your Phone ................................................... 11 Phone Layout ........................................................ Display ................................................................. Service Light ......................................................... Camera ................................................................
Entering Text ................................................ 51 Changing the Text Input Mode ................................. Using T9 Mode....................................................... Using Alphabet Mode .............................................. Using Number Mode ............................................... Using Symbol Mode ................................................ 51 52 55 56 56 Options During a Call .................................... 57 Putting a call on Hold.............
Outbox ................................................................. Draft .................................................................... Write New............................................................. Templates............................................................. Delete All .............................................................. Memory Status ...................................................... Setup ...................................................................
Display Settings................................................... Greeting Message ................................................ Own Number ....................................................... Language............................................................ Security.............................................................. Extra Settings...................................................... Short Cut ............................................................ TTY Setting ...................
PUK.................................................................... 160 PIN2 .................................................................. 161 PUK2.................................................................. 161 Health and Safety Information ................... 163 Exposure to Radio Frequency (RF) Signals ............... 163 For Body Operation .............................................. 165 Precautions When Using Batteries .......................... 165 Road Safety .......................
Table of Contents 6
Important Safety Precautions Read these guidelines before using your wireless phone. Failure to comply with them may be dangerous or illegal. Road Safety at All Times Do not use a hand-held phone while driving; park the vehicle first. Switching Off When Refueling Do not use the phone at a refueling point (service station) or near fuels or chemicals. Switching Off in an Aircraft Wireless phones can cause interference. Using them in an aircraft is both illegal and dangerous.
forbidden to use it, or when it may cause interference or danger (in a hospital for example). Sensible Use Use only in the normal position (held to the ear). Avoid unnecessary contact with the antenna when the phone is switched on. Emergency Call Ensure the phone is switched on and in service. Key in the emergency number for your present location, key. You must deactivate any then press the unnecessary features before you can make an emergency call.
Unpacking Your package contains the following items: Handset Travel Charger Battery Ear-microphone User’s Manual Note: The items supplied with your phone may be different, depending upon your country or service provider.
Unpacking 10
Your Phone Phone Layout The following illustrations show the main elements of your phone: Your Phone 11
Ear-microphone jack Camera Service light Antenna Camera key External display Service light Key(s) Description In Menu mode, scrolls through the menu options and Phone Book. In Idle mode, the Up key allows you to access the Camera menu and the Down key to access your favorite menu option directly. For further details about shortcuts, see “Using Shortcuts” on page 66. In Menu mode, the Left key returns to the previous menu level and the Right key selects the current menu.
Key(s) Description (Continued) Performs the functions indicated by the text above them, on the bottom line of the display. (soft keys) In Idle mode, launches the WAP (Wireless Application Protocol) browser. Makes or answers a call. In Idle mode, recalls the last number dialed, received or missed. In Menu mode, selects a menu function or stores information that you have entered, such as a name in the SIM card or phone’s memory. Ends a call. Also switches the phone on and off when held down.
Key(s) Description (Continued) Enters special characters. Performs various functions. (on the right side of the phone) In Standby mode, turns the camera on when held down. In Capture mode, works as a camera shutter. (on the left side of the phone) During a call, adjusts the earpiece volume. In Idle mode with the folder open, adjusts the keypad tone volume. With the folder closed, turns the external display on when held down. In Menu mode, scrolls through the menu options and Phone Book.
Display Display Layout The display has three areas: Area Description First line Displays various icons. See page 16. Middle lines Displays messages, instructions and any information that you enter, such as the number you are dialing. Last line Shows the current functions assigned to the two soft keys.
Icons Icon Description Shows the received signal strength. The greater the number of bars, the stronger the signal. Appears when a call is in progress. Appears when you are out of your service area. When it displays, you cannot make or receive a call. Appears when you are connected to the GPRS network. Appears when the GPRS data connection is established. Appears when you are out of your home area and have logged onto a different network; for example, when traveling in other countries.
Icon Description (Continued) Appears when you set an alarm to ring at a specified time. Appears when Silent mode is active or when you set the Alert Type menu (Menu 5.3) to Vibration. For further details, see page 33 and page 113 respectively. Appears when Mute mode is active. Shows the level of your battery. The more bars you see, the more power you have remaining. Backlight The backlight illuminates the display and the keypad.
you have set an alarm by flashing the service light and showing the corresponding icon on the display. You can also select the color of an image to be displayed in the Front LCD menu (Menu 6.1.2). See “Front LCD” on page 118 for further details. To turn the display on with the folder closed, press and hold one of the Volume keys on the left side of the phone. With the folder closed, you can take photos using the external display by pressing the Camera key on the right side of the phone.
Camera The camera module on the folder of your phone allows you to take a photo or record a video while on the move. For further details about the Camera feature, see page 103.
Your Phone 20
Getting Started Installing the SIM Card When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription details, such as your PIN, any optional services available and so on. Important! The plug-in SIM card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card. Keep all SIM cards out of the reach of small children. 1.
3. Slide the SIM card into the SIM card socket, as shown, so that it locks the card into position. Make sure the metal contacts of the card face into the phone. When you need to remove the SIM card, slide it upwards, as shown, and take it out of the socket.
4. Replace the battery so that the tabs on the end align with the slots at the bottom of the phone. 5. Press the battery down until it clicks into place. Make sure that the battery is properly installed before switching the power on. Charging the Battery Your phone is powered by a rechargeable Li-ion battery. A travel charger comes with your phone for charging the battery. Use only approved batteries and chargers. Ask your local Samsung dealer for further details.
The travel charger allows you to use the phone while the battery is charging, but this causes the phone to charge more slowly. Note: You must fully charge the battery before using your phone for the first time. A discharged battery is fully recharged in approximately 200 minutes. 1. With the battery in position on the phone, plug the connector of the travel charger into the jack at the bottom of the phone. 2. Plug the adapter into a standard AC wall outlet. 3.
phone by pressing the buttons on both sides of the connector and pulling the connector out. Note: You must unplug the adapter before removing the battery from the phone during charging; otherwise, the phone could be damaged. Low Battery Indicator When the battery is weak and only a few minutes of talk time remain, a warning tone sounds and a message repeats at regular intervals on the display. If this happens, the display dims to conserve the remaining battery power.
3. If the phone asks you to enter the phone password, enter the password and press the OK soft key. It is preset to “00000000” at the factory. For further details, see page 159. 4. If the phone asks for a PIN, enter the PIN and press the OK soft key. For further details, see page 160. The phone searches for your network and, after finding it, the idle screen appears on the display. You can now make or receive a call. The display language is preset to English at the factory.
Call Functions Making a Call When the idle screen displays, enter the area code key. and phone number, then press the Note: When you activate the Auto Redial option in the Extra Settings menu (Menu 6.6), the phone automatically redials up to ten times when the person does not answer the call or is already on the phone. See page 123 for further details. Making an International Call 1. Press and hold the 0 key. The + character appears. 2. Enter the country code, area code and phone number and press the key.
Correcting the Number To clear Press the the last digit displayed C key. any other digit in the number Left or Right key until the cursor is immediately to the right of the digit to be cleared. Press the C key. You can also insert a missing digit simply by pressing the appropriate key. the whole display C key and hold it for more than one second. Ending a Call When you want to end your call, briefly press the key or close the folder.
3. Use the Up and Down keys to scroll through the numbers until the number you want is highlighted. To dial the number Press the key. edit the number Options soft key and select Edit. Change the number, referring to “Correcting the Number” on page 28. delete the number Options soft key and select Delete. delete all of the numbers on the Call Log list Options soft key and select Delete All. For further details, see page 100.
Press the key to increase the volume level and the key to decrease the level. In Idle mode, you can also adjust the keypad tone volume using these keys. Answering a Call When somebody calls you, the phone rings and displays the incoming call image. When the caller can be identified, the caller’s phone number or name, if stored in your Phone Book, displays. 1. If necessary, open the folder. 2. Press the key or the Accept soft key to answer the incoming call.
When the Active Folder option in the Extra Settings menu (Menu 6.6) is activated, you can answer the call simply by opening the folder. See page 123. To reject the call, press and hold one of the Volume keys, or press the Reject soft key or key. 3. End the call by pressing the key. Note: You can answer a call while using Phone Book or menu features. After ending the call, the phone returns to the function screen you were using.
To Press the edit or delete a missed call number Select soft key. See below. Editing a Missed Call Number Note: When the number for the missed call is not available, the Edit option does not display. 1. Press the View soft key. 2. Press the Up or Down key to highlight the number and press the Select soft key. 3. Press the Options soft key. 4. Select the Edit soft key. Enter your edits and press the Save soft key. 5.
Deleting a Missed Call 1. Press the Options soft key. 2. If necessary, press the Up or Down key to highlight the Delete option. 3. Press the Select soft key. You can press the Missed Call feature. key at any time to exit the Note: You can access the Missed Call feature at any time by selecting the Missed Calls menu (Menu 3.1). For further details, see page 99. Quickly Switching to Silent Mode Silent mode is convenient when you wish to stop the phone from making noise, in a theater for example.
Note: Menu 5.7 Power On/Off vibration occurs during power on not power off. To exit and reactivate the previous sound settings, key again until “Exit Silent press and hold the Mode” appears. The Vibration icon ( ) no longer displays.
Selecting Functions and Options Your phone offers a set of functions that allows you to customize it. These functions are arranged in menus and sub-menus, accessed using the two soft keys and . Each menu and sub-menu allows marked you to view and alter the settings of a particular function. The roles of the soft keys vary according to the function you are currently using; the labels on the bottom line of the display just above each key indicate its current role.
To view the various functions and options available and to select the one you want: 1. Press the appropriate soft key. To select the: • function displayed • option highlighted Press the Select soft key or the Right key. view the next function or highlight the next option on a list Down key or the key on the left side of the phone. move back to the previous function or option on a list Up key or the key on the left side of the phone.
Phone Book You can store phone numbers and their corresponding names in both your SIM card and phone’s memory. They are physically separate but are used as a single entity, called Phone Book. Storing a Number with a Name There are two ways to store a number: ♦Using the Save soft key in Idle mode ♦Using the New Entry option in the Phone Book menu Storing a Number in Idle Mode As soon as you start to enter a number, Save appears above the left soft key to allow you to store the number in Phone Book. 1.
3. Select the category of the number to be stored. Three categories are available: Mobile Number Work Number Home Number To select the category, press the Left or Right key and press the Select soft key. 4. Select a memory location, either SIM or Phone, by pressing the Up or Down key and press the Select soft key. Note: When you change phones, any numbers stored in your SIM card memory are automatically available with the new phone, whereas any numbers stored in the phone’s memory must be reentered. 5.
Storing a Number Using the Phone Book Menu 1. When the idle screen displays, press the Ph.Book soft key. 2. Scroll to New Entry by pressing the Up or Down key and press the Select soft key. 3. Select the category of the number to be stored by pressing the Left or Right key, and press the Select soft key. Note: E-mail Address is available in this step. It allows you to save an e-mail address instead of a phone number. 4.
To return to the idle screen Press the key. Using Phone Book Entry Options While accessing any Phone Book entry, press the Options soft key to access the options for the entry. To Press the select the highlighted option Select soft key or the Right key. highlight a different option Up or Down key until the option you want highlights. The following options are available: Paste: allows you to paste the number into the normal dialing mode.
the selected number. For details about the Camera feature, see “Camera” on page 103. Select a Photo: allows you to select a photo for the number. View: displays a photo assigned to the number. Delete: cancels the photo caller ID setting for the number. Delete: allows you to delete the selected number from Phone Book. You are asked to confirm that you wish to delete the name and number by pressing the Yes soft key. Copy: allows you to copy the number to another location. You can select the memory location.
Dialing a Number from the SIM Card 1. In Idle mode, enter the location number of the number you want to dial and press the # key. The list of the entries in the SIM card appears. 2. If necessary, scroll through the list using the Up or Down key. 3. When the number displays, press the Dial soft key or key. Dialing a Number from the Phone’s Memory 1. In Idle mode, press and hold the 0 key. A + appears. 2. Enter the location number of the number you want and press the # key. 3.
Setting up Speed-dial Entries 1. When the idle screen displays, press the Ph.Book soft key. 2. Scroll to speed dial by pressing the Up or Down key and press the Select soft key. 3. Select a number between 2 to 9 to assign the speed dialling number, and press the OK soft key. Note: Memory location 1 is reserved for your Voice Mail server number. If you have already assigned a number to the key, the Options soft key replaces the OK soft key. Go to step 6. 4.
♦Number: allows you to view the number assigned to the key. You can dial the number by pressing the key. Speed-dialing from Phone Book To speed-dial the numbers assigned to the 2 to 9 keys, press and hold the appropriate key. Searching for and Dialing a Number in Phone Book After storing numbers in Phone Book, you can search for them in two ways; by name and by caller group. Searching for a Number by Name 1. When the idle screen displays, press the Ph.Book soft key. 2.
To look for a name starting with a different letter Press the key labeled with the letter you want. 4. Once you have found the entry, press the key to dial the number, or press the Options soft key to access the Phone Book entry options; for further details, see page 40. Searching for a Number by Caller Group 1. When the idle screen displays, press the Ph.Book soft key. 2. Scroll to Group Search by pressing the Up or Down key and press the Select soft key. You are asked to enter a group name. 3.
To select a different entry Press the Up or Down key until the entry you want highlights. 5. Once you have found the entry, press the key to dial the number, or press the Options soft key to access the Phone Book entry options; for further details, see page 40. Editing a Caller Group 1. When the idle screen displays, press the Ph.Book soft key. 2. Scroll to Group Edit by pressing the Up or Down key and press the Select soft key. 3. Scroll through the group list by pressing the Up or Down key. 4.
♦Graphic: allows you to set a graphic icon to be displayed when you receive a voice call from a person in the group. ♦Group Name: allows you to assign a name to the group. For further details about entering characters, see page 51. 6. When you are finished, press the or key. Speed-dialling from the SIM Card To speed-dial the numbers saved in the SIM card: 1. Enter the location number and press the key. or 2.
3. To place a check mark by the memory you want to empty, All, SIM or Phone, press the Mark soft key. You can remove the check mark by pressing the Unmark soft key. 4. When you are finished marking, press the Delete soft key to delete the entries in the selected memory. 5. Enter the phone password and press the OK soft key. The password is preset to “00000000” at the factory. To change this password, see page 159. 6. When a confirming message appears, press the Yes soft key.
3. Press the Up or Down key to view the number of existing and total entries available in the SIM card and phone’s memory. 4. When you are finished, press the C or key. Using the Service Dialing Numbers You can view the list of Service Dialing Numbers (SDN) assigned by your service provider. These numbers include emergency numbers, directory enquiries and voice mail numbers. 1. When the idle screen displays, press the Ph.Book soft key. 2.
Phone Book 50
Entering Text When using your phone, you will often need to enter text, such as when storing a name in Phone Book, creating your personal greeting or scheduling events on your calendar. You can enter alphanumeric characters by using your phone’s keypad. Your phone has the following text input modes: ♦T9 mode This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter; for example, when you press the 5 key once, J, K or L displays.
Example: Writing a text message To select T9 mode Alphabet mode Number mode Symbol mode Press the right soft key until displays. See page 52. displays. See page 55. displays. See page 56. the symbol list displays. See page 56. Using T9 Mode T9 is a predictive text input mode that allows you to key in any character using single keystrokes. This text input mode is based on a built-in dictionary. To enter a word in T9 mode: 1. When you are in T9 mode, start entering a word by pressing the 2 to 9 keys.
Example: To enter “HELLO” in T9 mode, press the 4, 3, 5, 5 and 6 keys. The word that you are typing appears on the display. It may change with each key that you press. 2. Enter the whole word before editing or deleting the keystrokes. 3. When the word displays correctly, go to step 4. If not, press the 0 key or the Up or Down key repeatedly to display alternative word choices for the keys that you have pressed. Example: Both “OF” and “ME” use the 6 and 3 keys.
The word is added to the T9 dictionary and becomes the first word for the associated keypress. ♦To enter periods, hyphens or apostrophes, press the 1 key. T9 mode applies grammar rules to ensure that the correct punctuation is used. ♦To shift the case in T9 mode, use the key. There are three cases; Initial Capital ( ), Capital lock ( ) and Lower case ( ). ♦You can move the cursor by using the Left and Right keys. To delete letters, press the C key. Press and hold the C key to clear the display.
Using Alphabet Mode Use the 1 to 0 keys to enter your text. 1. Press the keys labeled with the letter you want: - Once for the first letter - Twice for the second letter - And so on 2. Select the other letters in the same way. Note: The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same key, just wait for a few seconds for the cursor to move to the right automatically, and then select the next letter.
♦To shift the case in Alphabet mode, use the key. There are three cases; Capital lock ( ), Lower case ( ) and Initial Capital ( ). ♦You can move the cursor by using the Left and Right keys. To delete letters, press the C key. Press and hold the C key to clear the display. Using Number Mode Number mode enables you to enter numbers into a text message. Press the keys corresponding to the digits you want to enter. Using Symbol Mode Symbol mode enables you to insert symbols into a text message.
Options During a Call Your phone provides a number of control functions that you can use during a call. Putting a call on Hold You can place the current call on hold whenever you want. You can make another call while you have a call in progress if your network supports this service. To place a call on hold, simply press the Hold soft key. You can reactivate the call whenever you want, by pressing the Unhold soft key. To make a call while you have a call in progress: 1.
When you want to finish, end each call by pressing key. the Using the Menu Functions During a call, you can access the main menu functions. 1. Press the Options soft key. 2. Press the OK soft key when the Menu option highlights. 3. Press the Up or Down key to scroll through the menu list. Note: You cannot use some menus during a call. They are deactivated on this list. 4. When the menu you want highlights, press the Select soft key. 5. If the selected menu has sub-options, repeat steps 3 and 4.
To switch the microphone off temporarily: 1. Press the Options soft key. 2. Press the Down key to highlight the Mute option. 3. Press the OK soft key. The other person can no longer hear you. To switch the microphone back on: 1. Press the Options soft key. 2. If necessary, press the Down key to highlight the Unmute option. 3. Press the OK soft key. The other person can hear you again. Muting or Sending Key Tones These options allow you to turn the key tones off or on.
Sending a Sequence of DTMF Tones You can send the DTMF tones after entering the entire number you need to send. This option is helpful for entering a password or an account number when you call an automated system, like a banking service. To send the DTMF tones: 1. When you are connected to the teleservice system, press the Options soft key. 2. Press the Down key to highlight the Send DTMF option. 3. Press the OK soft key. 4. Enter the number you want to send and press the OK soft key. The tones are sent.
If you enter the first few letters of the name, the Phone Book entries are listed, starting with the first entry matching your input. 5. To view the highlighted entry, press the View soft key. For further details about the Phone Book feature, see page 37. Using the SMS Service If you receive an SMS (Short Message Service) message during a call, the Message icon ( ) flashes on the display. The SMS Service option enables you to read the message. You can also write a new text message.
3. To end the call on hold, press the Options soft key and select the End Held Call option. To end the current call, press the key. Making a Multi-party Call A multi-party call is a network service that allows up to six people to take part simultaneously in a multiparty or conference call. For information, contact your service provider. Setting up the Multi-party Call 1. Call the first participant in the normal way. 2. Call the second participant in the normal way.
The list of call participants appears. 2. Highlight a person from the list by pressing the Up or Down key, and press the Select soft key or the key. 3. When the Private option highlights, press the OK soft key. You can now talk privately to that person. The other participants can still converse with each other. 4. To return to the multi-party call, press the Options soft key and select the Join option. Press the OK soft key. All the multi-party call participants can now hear each other.
4. When you want to end the multi-party call, press the key. New Call While on a call, you can place another call by pressing the Options soft key. Highlight the New Call option or press the 6 key. Dial the number you wish to key.
Using the Menus The phone offers a range of functions that allow you to tailor it to your needs. These functions are arranged in menus and sub-menus. The menus and sub-menus can be accessed by scrolling using the Navigation keys or by using the shortcuts. Accessing a Menu Function by Scrolling 1. In Idle mode, press the Menu soft key to access Menu mode. 2. Scroll using the Up or Down key to reach a main menu, Phone Settings for example. Press the Select soft key or the Right key to enter the menu. 3.
To Press the return to the previous Left key, C key or menu level exit the menu without changing the settings soft key. key. Using Shortcuts The menu items, such as menu, sub-menus and options, are numbered and can be accessed quickly by using their shortcut numbers. The shortcut number soft key on is shown at the bottom right next to the the display. Simply press the Menu soft key and enter the number of the menu you want. Note: The numbers assigned to each menu are indicated on the list on page 67.
Note: If you use a SIM AT card that provides additional services, the SIM AT menu displays when you press the Menu soft key to enter Menu mode. For further details, see your SIM card instructions. 1. Text Messages 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 (see page 73) Inbox Outbox Write New Templates Settings 1.5.1 AWS SMS 1.5.2 Setting 2* 1.5.3 Setting 3* 1.5.4 Setting 4* 1.5.5 Common Setting Delete All Memory Status 1.7.1 SIM Memory 1.7.2 PHONE Memory 1.7.3 CB Memory* Voice Mail 1.8.
2.5 2.6 2.7 2.8 2.9 Templates Delete All Memory Status Setup MMS Profile 3. Call Records (see page 99) 3.1 3.2 3.3 3.4 3.5 Missed Calls Incoming Calls Outgoing Calls Delete All Call Time 3.5.1 Last Call 3.5.2 Total Outgoing 3.5.3 Total Incoming 3.5.4 Life Time 3.5.5 Reset Timers 3.6 Call Cost* 3.6.1 Last Call Cost 3.6.2 Total Cost 3.6.3 Max Cost 3.6.4 Reset Counters 3.6.5 Set Max Cost 3.6.6 Price/Unit 4. Camera 4.1 4.2 4.3 4.4 4.5 4.
5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 Ring Volume Alert Type Keypad Tone Message Tone 5.5.1 SMS Tone 5.5.2 SMS-CB Tone* 5.5.3 MMS Tone Folder Tone Power On/Off Alerts on Call Extra Tones 6. Phone Settings (see page 117) 6.1 Display Settings 6.1.1 Wallpaper 6.1.2 Front LCD 6.1.3 Menu Style 6.1.4 Back Light 6.1.5 Service Light 6.1.6 Graphic Logo 6.2 Greeting Message 6.3 Own Number 6.4 Language 6.5 Security 6.5.1 PIN Check 6.5.2 Change PIN 6.5.3 Phone Lock 6.5.4 Change Password 6.5.5 Privacy 6.5.6 FDN Mode** 6.
7. Organizer (see page 127) 7.1 Alarm 7.1.1 Once Alarm 7.1.2 Daily Alarm 7.1.3 Morning Call 7.1.4 Remove Alarm 7.1.5 Autopower 7.2 Calendar 7.3 Time & Date 7.3.1 Set Time 7.3.2 Set Date 7.3.3 World Time 7.3.4 Time Format 7.3.5 Auto Update 7.4 Calculator 7.5 To Do List 7.6 Voice Memo 7.6.1 Record 7.6.2 Voice Memo List 7.6.3 Delete All 7.6.4 Memory Status 7.7 Currency Exchange 8. Network Services (see page 139) 8.1 Call Forwarding 8.1.1 Forward Always 8.1.2 Busy 8.1.3 No Reply 8.1.4 Unreachable 8.1.
9.2 9.3 9.4 9.5 9.6 9.1.2 Bookmarks 9.1.3 http:// 9.1.4 Settings 9.1.5 Clear Cache 9.1.6 Push Message Games Sounds Images Delete All Memory Status 9.6.1 Games 9.6.
Using the Menus 72
Text Messages Short Message Service (SMS) allows you to send and receive short text messages to and from other GSM mobile phones. In addition, your phone supports the Enhanced Messaging Service (EMS), which enables you to include simple pictures, melodies and animated images in your messages. To use this feature, you must subscribe to your service provider’s message service. When the Text Message icon ( ) appears, you have received new text messages.
While reading a message, you can choose the following options by pressing the Options soft key: Delete: allows you to delete the message. Send: allows you to forward the message. For further details about how to send a message, see page 76. Reply: allows you to reply to the sender by sending a text message. Call Back: allows you to call the sender back. Cut Address: allows you to extract the sender’s number and URL, e-mail addresses or phone numbers from the message text.
1. Select a message from the list by pressing the Up or Down key and press the View soft key to read the message contents. 2. To scroll through the contents, press the Up or Down key. 3. To scroll to the previous or next message, press the or key. While reading a message, you can choose the following options by pressing the Options soft key: Delete: allows you to delete the message. Send: allows you to send/resend the message. For further details about how to send a message, see page 76.
Write New In this menu, you can write and send a text message. Note: When you add media objects to the message, the number of characters you can enter decreases. Creating a Simple Text Message 1. Create your message. For further details about entering characters, see page 51. 2. When you finish entering the message, press the Options soft key. The following options are available: ♦Send Only: allows you to send the message. The message is deleted after sending.
4. If you select a save option, choose the memory location and press the OK soft key. 5. Enter a destination number and press the OK soft key. The message is sent. Note: When the phone fails to send the message, it asks you if you want to retry. Press the OK soft key to confirm. Otherwise, press the Exit soft key to return to the Write New screen. Creating a Message Using the Options 1. Create a message. 2. Press the Options soft key. 3.
♦Add Phonebook: allows you to add a Phone Book entry to your message. Select one from the list. ♦Add Bookmark: allows you to add a web page address stored in your Bookmarks list (Menu 9.1.2). Select one from the list. ♦Language: allows you to change the language to be used in the T9 input mode. Select the language you want to use. 4. Complete the message, and send or save it by following the procedure from step 2 on page 76.
required to send messages. The number of setting groups available depends on the capacity of your SIM card. Note: 1.The setting options available in this menu may be different depending on your service provider. 2.The last setting you accessed is automatically activated for sending messages. AWS SMS (default setting)/Setting x (where x is the setting group number): each group has its own sub-menu.
Delivery Reports: allows you to activate or deactivate the report function. When this function is activated, the network informs you whether or not your message has been delivered. Bearer Selection: allows you to choose either GSM or GPRS, depending on your network. Character Support: allows you to choose either GSMAlphabet, Uni-Code or Automatic, depending on your network. If you select Uni-Code and your recipient’s phone does not support it, your recipient may not be able to read your message.
Memory Status This menu shows how many messages are currently stored in the SIM, phone and CB (cell broadcast) memories. Voice Mail This menu allows you to access your voice mailbox, if your network supports this service. The following options are available: Connect to Voice Mail: before using the Voice Mail feature, you must enter the voice server number obtained from your service provider; see menu option 1.8.2. You can then select this option and press the OK soft key to listen to your messages.
Broadcast This network service allows you to receive text messages on various topics, such as the weather or traffic. Cell Broadcast (CB) messages display as soon as they are received, provided that: ♦the phone is in Idle mode. ♦the Receive option is set to Enable. ♦the message channel is currently active on the channel list. This menu may not be available depending on your SIM card. The following options are available: Read: lets you view the received message.
Edit: use to change the ID and title of an existing channel. Language: allows you to select your preferred language to display cell broadcast messages. Please contact your service provider for further details.
Text Messages 84
Multimedia Messages The menu allows you to use the Multimedia Message Service. Multimedia Message Service (MMS) is a messaging service very similar to Short Message Service (SMS). It provides automatic and immediate delivery of personal multimedia messages from phone to phone or from phone to e-mail. In addition to the familiar text content of text messages, multimedia messages can contain images, graphics, voice and audio clips. An MMS message is a multimedia presentation in a single entry.
If you want to view the message later in the Inbox, press the Exit soft key. 2. To scroll through the message information, press the Up or Down key. 3. Press the Options soft key to use the following options: ♦Retrieve: retrieves the message from the MMS server. ♦Delete: deletes the message. ♦Properties: shows you detailed information about the message. 4. To read the message, press the Select soft key when Retrieve is highlighted. Your phone retrieves the message contents from the server and display it.
♦ : Messages that are unopened. 1. Select a message on the list and press the Select soft key. The message displays and scrolls to the next page, if it has one, after a specified time; for details about setting the time, see page 93. 2. Press the OK soft key to go to the message view screen. Or, the display will automatically switch to the screen. 3. To scroll through the message, press the Up or Down key.
Send: allows you to forward the message to another person. Save Picture: allows you to save a picture from the message into your phone. They are stored in the Images folder (Menu 9.4). Save Sound: allows you to save a sound from the message into your phone. They are stored in the Sounds folder (Menu 9.3).
2. Press the OK soft key to go to the message view screen. Or, the display will automatically switch to the screen. 3. To scroll through the message, press the Up or Down key. If the message has more than one page, you can scroll through the pages by using the Left and Right keys. While viewing a message, you can choose the following options by pressing the Options soft key: Delete: deletes the message.
Write New This menu allows you to create a new multimedia message and then send it to multiple destinations. Creating and Sending a Multimedia Message 1. Enter the subject of your message and press the OK soft key. For further details about entering characters, see page 51. 2. When Add Here highlights, press the Options soft key and add the message contents using one of the following options: ♦Add Text: enter the message text and press the OK soft key.
♦Save: saves the message in the Draft (Menu 2.3) or Templates (Menu 2.5) box for later use. This option is activated after you add content to the message. ♦Settings: allows you to change the message settings. For further details about each setting option, see page 93. After changing the settings, you need to press the soft key or the C key to go to back to the options screen. ♦Add Destination: allows you to enter destination numbers or addresses. See steps 6 to 11 starting from page 92.
page. You can move to each page using the Left or Right key on the message screen. ♦Delete: deletes the item from your message. ♦Duration: allows you to set when an image or a sound displays on the message presentation screen and a length of time it will display for. When the message is opened, the display shows the item after a specified time in Set Start Time and scrolls to the next item after a specified time in Set Duration. ♦Send: allows you to send the message.
8. Enter a number or an e-mail address, or select a number from your Phone Book. 9. When the correct number or address displays, press the OK soft key. 10.To add a destination, press the Select soft key when Add Destination highlights. Repeat from step 7. If you want to edit the destinations, select one and press the Select soft key. You can change or delete it. 11.To enter additional numbers or addresses to the other destination types, press the C key or the soft key and repeat steps 6 through 10.
Hide ID: when this option is enabled, your phone number does not display on the recipient’s phone. Expiry Date: you can select the length of time your messages are stored in the message center after they are sent. Delivery Time: you can set a delay time before the phone sends your messages. Priority: you can select the priority level of your messages. Templates This menu stores messages you saved as templates so that you can use them to make new messages. 1.
Delete All This menu allows you to delete all of the multimedia messages in each message box. You can also delete all of your messages at one time. To Press the select a message box to clear Up or Down key. To delete all of your messages, select All Messages. place a check mark Mark soft key. remove a check mark Unmark soft key. delete the marked messages Delete soft key. When a confirming message displays, press the Yes soft key to confirm.
Delivery Report: when this option is enabled, the network informs you whether or not your message has been delivered. Read Reply: when this option is enabled, your phone sends a request for a reply along with your message to the recipient. Auto Download: you can set whether or not your phone retrieves new incoming messages from the MMS server without notifications. When this option is enabled, the phone automatically retrieves new messages from the server.
message presentation screen. After a specified time, the display automatically scrolls to the next page. MMS Profile In this menu, you can configure various network settings that are required when you send or receive multimedia messages. Note: 1.The last profile you accessed is automatically activated for sending messages. 2.If you change the MMS settings without first checking with your service provider, the MMS feature may not work properly.
Multimedia Messages 98
Call Records In this menu, you can view the: ♦calls you missed, received or dialed. ♦length of your calls. ♦cost of your calls. Note: 1.You can access the numbers in the three types of call records by pressing the key in Idle mode. 2.The number of call records the phone can store may be different depending on your SIM card. Missed Calls This menu lets you view the last 20 numbers of the calls you received, but did not answer.
♦delete the call from the list. You can also dial the number by pressing the key. Outgoing Calls This menu lets you view the last 20 numbers you dialed. The number or name, if available, displays together with the time and date when the call was made. By pressing the Options soft key, you can: ♦edit the number and dial it or save it in Phone Book. ♦delete the call from the list. You can also dial the number by pressing the key.
Call Time This menu lets you view the timers for calls you made and received. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding-off for billing purposes and so on. The following timers are available: Last Call: length of the last call. Total Outgoing: total length of all calls you made since the timer was last reset. Total Incoming: total length of all calls you received since the timer was last reset.
can no longer make any calls until you reset the counter. Max Cost: maximum cost set in the Set Max Cost option. See below. Reset Counters: option used to reset the cost counter. You must first enter your PIN2 (see page 161) and then press the OK soft key. Set Max Cost: option used to enter the maximum cost that you authorize for your calls. You must first enter your PIN2 (see page 161) and then press the OK soft key.
Camera Using the camera module in your phone, you can take photos of people or events while on the move. Additionally, you can send photos to other people in a multimedia message or set one as a wallpaper. You can also record videos using your phone as a camcorder. Note: You can quickly enter the Camera menu by pressing the UP key in Idle mode. CAUTION: Do not take photos of people without their permission. Do not take photos in a place where cameras are not allowed.
Taking a Photo with the Folder Open 1. Access the Take Photos menu to turn the camera on. Or you can press and hold the Camera key ( ) on the right side of the phone in Idle mode. The image to be captured appears on the display. 2. Adjust the image by aiming the camera at the subject. 3. To Press the adjust the brightness Left and Right keys. of the image Camera 104 zoom in or out Up and Down keys. flip vertically or horizontally Volume keys. use the camera options right soft key.
To Press the use a frame 7 key. set a delay time 8 key. Press the left soft key to take the picture using the delay function. move to the My Photos or My Videos menu 9 key. 4. Press the Camera key on the right side of the phone or the left soft key to take the photo. 5. Press the Save soft key. To discard the photo and return to the capture mode, press the Cancel soft key. To use the photo options Press the Options soft key. For further details, see page 106.
Set as Wallpaper: allows you to set the image as your wallpaper for the idle screen. Set as Caller ID: allows you to set the photo as a caller ID image for Phone Book entries. Protection: allows you to protect the photo from being deleted. Delete: deletes the photo. Rename: allows you to change the name of the photo. Properties: shows the properties of the photo, such as the time and date it was saved, file size, photo size, protection status, file format and file name.
Speed, and the number of photos the camera will take. When you press the Camera key, the camera takes photos successively. After taking photos, press the SaveAll soft key to save all of them or the Save soft key to save the selected one. Rotation: rotates the photo. You can reverse the photo as a mirror image or flip the photo vertically. Self Timer: allows you to have a delay time before the camera takes the photo. Select the length of time you want.
The photo is automatically saved in the My Photos menu (Menu 4.2). My Photos This menu allows you to review your photos. When you access this menu, your phone displays them in Thumbnail mode, which shows all your photos as smaller images. Use the Navigation keys to scroll through the photos. To view photos on the full screen, select the photo you want to view and then press the View soft key. In this mode, you can scroll through the photos by using the Left and Right keys.
Record Videos You can record a video that is currently displayed on the camera screen and save it as a video file. Recording a Video 1. When the camera turns on, adjust the image by aiming the camera at the subject. 2. To Press the change the camera mode 1 key. adjust the brightness of the image Left and Right keys. zoom in or out Up and Down keys. 3. Press the left soft key or the Camera key to start recording. 4. When you are finished, press the left soft key or Camera key.
My Videos When you access this menu, the thumbnail images of the videos display. To play a video: 1. Press the Navigation keys to scroll to the video you want to view. 2. Press the Play soft key to start playing the video. To Press the pause the playback Pause soft key. resume Continue soft key. stop Stop soft key or C key. return to Idle mode key. Press the Options soft key to use the following options: Rename: allows you to change the file name. Delete: deletes the current video file.
Delete All This menu allows you to delete each type of the photos or videos saved in your phone. You can also delete all of your photos and videos at one time. To Press the select a photo or video type to clear Up or Down key. To delete all of your photos and videos, select All. place a check mark Mark soft key. remove a check mark Unmark soft key. delete the marked photos or (and) videos Delete soft key. When a confirming message displays, press the Yes soft key to confirm.
Camera 112
Sound Settings You can use the Sound Settings feature to customize various settings, such as the: ♦ring melody, volume and type. ♦sounds made when you press a key, receive a message, open/close the folder or switch your phone on or off. ♦alert tone made every minute during a call, when you make an error or when your call is connected to the system. Ring Tone This menu allows you to select a ring melody. You can choose between many different melodies.
Melody: the phone rings using the selected ring tone or alarm melody. Vibration: the phone vibrates but does not ring. Vibra+Melody: the phone first vibrates three times and then starts ringing. Keypad Tone This menu allows you to select the tone that the phone sounds when you press a key. To turn the sound off, select Off. Message Tone This menu allows you to select how the phone informs you that a new message has been received.
Light Only: the service light flashes. Vibration: the phone vibrates. Single Beep: the phone beeps once. SMS-CB Tone X: the phone uses one of several CB tones. MMS Tone The following options are available for alerting you to new multimedia messages: Off: the phone does not use a MMS tone. Light Only: the service light flashes. Vibration: the phone vibrates. Single Beep: the phone beeps once. MMS Tone X: the phone uses one of several MMS tones.
Alarm Text messages ● MMS ● SMS ● Low Battery ● WAP Push The default setting is On. To turn off this setting, select the OFF setting and press the Select soft key. ● ● Extra Tones You can customize additional tones used for the phone. To turn a given tone Press the on On soft key. A check mark displays in front of the option. off Off soft key again. The check mark no longer displays. The following options are available: Error Tone: sets whether or not the phone informs you when you make a mistake.
Phone Settings Many different features of your phone can be customized to suit your preferences. All of these features are accessed in the Phone Settings menu. Display Settings In this menu, you can change various settings for the display or backlight. Wallpaper This menu allows you to change the background image or the color of the text to be displayed in Idle mode. The following options are available: Wallpaper: you can select a background image to be displayed on the idle screen.
Text Display: you can specify whether or not the phone displays the time and date on the idle screen. Text Color: you can select the color of the text to be displayed on the idle screen. Front LCD This menu allows you to select the color of an image to be displayed on the external display. Menu Style This menu allows you to select the menu display style. You can choose either Bar Style or Page Style. Back Light You can select the length of time the backlight is on for.
Graphic Logo This menu allows you to display your service provider’s logo instead of its name. Off: the service provider’s name displays in Idle mode. On: the service provider’s logo stored in your phone displays in Idle mode; if no logo has been stored, the service provider’s name displays. Greeting Message This menu allows you to set a greeting to be displayed briefly when the phone is switched on. To Press the clear the existing message C key and hold it down until the message is cleared.
Any changes made here do not in any way affect the actual subscriber numbers on your SIM card. Language You can select a display language. When the language option is set to Automatic, the language is automatically selected according to the language of the SIM card used. Security The Security feature enables you to restrict the use of your phone to others and the types of calls. Various codes and passwords are used to protect the features of your phone. They are described in the following sections.
Change PIN This feature allows you to change your current PIN to a new one, provided that the PIN Check feature is enabled. You must enter the current PIN before you can specify a new one. Once you have entered a new PIN, you are asked to confirm it by entering it again. Phone Lock When the Phone Lock feature is enabled, the phone is locked and you must enter an 8-digit phone password each time the phone is switched on. The password is preset to “00000000” at the factory.
The password is preset to “00000000” at the factory. Once you have entered a new password, you are asked to confirm it by entering it again. Privacy Using this menu, you can lock your contents, such as multimedia messages, photos, video clips, voice memo, downloaded images and sounds. Once you have locked the contents, you must enter the phone password to access the associated menus. To select an item to lock Press the Up or Down key. To lock all of your contents, select All.
The following options are available: Disable: you can call any number. Enable: you can only call phone numbers stored in Phone Book. You must enter your PIN2. Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display. Change PIN2 The Change PIN2 feature allows you to change your current PIN2 to a new one. You must enter the current PIN2 before you can specify a new one. Once you have entered a new PIN2, you are asked to confirm it by entering it again.
Auto Redial: when this option is checked, the phone makes up to ten attempts to redial a phone number after an unsuccessful call. Note: The interval between two attempts varies. Active Folder: when this option is checked, you can simply open the folder to answer a call. When it is unchecked, you must open the folder and press a key to answer a call, depending on the setting of the Anykey Answer option. See below.
To deactivate a shortcut key, select the None option. 3. Press the Select soft key to save the selection. TTY Setting TTY, a TDD or Text Telephone, is a telecommunications device that allows people who are deaf or hard of hearing, or who have speech or language disabilities, to communicate by telephone. In this menu, you can enable your phone’s TTY feature. The following options are available: Enable: allows you to communicate with other TTY users.
Phone Settings 126
Organizer The Organizer feature enables you to: ♦set an alarm so that the phone rings at a specific time, such as to remind you of an appointment. ♦view the calendar and organize your schedule. ♦set the current time and date. ♦use the phone as a calculator for basic mathematical equations or currency exchange operations. ♦define a list of things to do. ♦record voice memos. Alarm This feature allows you to: ♦set the alarm to ring at a specific time.
Your phone is preset to use 12-hour format. To change the format, see page 132. If you want to use the alarm options, press the Options soft key. The following options are available: • Remove Alarm: deactivates the current alarm. • Alarm Sound Set: allows you to select the alarm melody. 3. Press the OK soft key. 4. Select AM or PM for 12-hour format and press the Select soft key. 5.
Consulting the Calendar When you select the Calendar menu (Menu 7.2), the calendar displays with today’s date highlighted. The following options are available when you press the Options soft key: Search All: displays all of the memos, starting with the oldest regardless of the day. To scroll through the memos, press the Up or Down key. Delete All: allows you to delete all of the memos. You are asked to confirm your action. Go to Date: allows you to go to a specific date.
4. If you want the alarm to ring on the chosen day, press the Yes soft key. Otherwise, press the No soft key. The memo is saved. 5. If you press the Yes soft key, set the time for the alarm and press the OK soft key. Your phone is preset to use 12-hour format. To change the format, see page 132. You can set the melody for the alarm by pressing the Melody soft key. 6. Select AM or PM for 12-hour format and press the Select soft key.
Delete: allows you to delete the memo. Copy to: allows you to copy the memo to another date. Move to: allows you to change the date of the memo. Time & Date This menu allows you to change the current time and date displayed. You can also find out what time it is in another part of the world. The following options are available: Set Time: allows you to enter the current time. You can choose the time format in the Time Format menu (Menu 7.3.4).
The local time and date display. 2. Press the Set soft key. Time Format: allows you to change the time format to 24 Hours or 12 Hours. Auto Update: allows you to receive time information from your service provider’s network. Off: you need to manually set the time and date according to the current time zone using the Set Time menu (Menu 7.3.1). On: the phone automatically updates the time and date according to the current time zone using the network service.
2. Press the right soft key until the arithmetic symbol you want appears: + (addition), - (subtraction), * (multiplication), / (division). 3. Enter the second number. 4. To view the result, press the key. 5. Repeat steps 1 to 4 as many times as required. To Do List This feature allows you to: ♦enter a list of tasks to be done. ♦assign a priority and a deadline to each task. ♦sort the tasks by priority and status mark. Creating the To Do List 1. Press the New soft key. 2. Enter the first task.
Editing the To Do List When you select the To Do List menu (Menu 7.5), the current contents display with the status mark if the for High, for task has been done and priority; Normal and for Low. You can use the following options: Action Procedures View the details for a specific task ➀ Highlight the task. ➁ Press the View soft key. ➂ Scroll through the tasks using the Up and Down keys, if necessary. Change the status of a specific task ➀ Highlight the task.
Action Edit an existing task Procedures (Continued) ➀ Highlight the task. ➁ Press the Options soft key. ➂ Select the Edit option. ➃ Change the text, priority and/or deadline for the task. Sort the existing ➀ Press the Options soft key. tasks by priority ➁ Select the Sort option. or status ➂ Select the sort criterion (High, Low, Done or Undo). Copy a task ➀ Highlight the task. ➁ Press the Options soft key. ➂ Select the Copy option. ➃ Change the text, priority and/or deadline for the task.
Action Exit the To Do list Procedures (Continued) ➀ Press the Options soft key. ➁ Select the Exit option. Voice Memo You can record voice memos. After recording, you can send a memo to other people using the Multimedia Message Service. Record This menu allows you to record a new memo. When you select this option, the display shows the 30second timer. 1. To start recording, press the Record soft key. 2. Record a memo by speaking into the microphone. 3.
5. Press the C key to clear the default name, if necessary, and enter a name for the memo. For further details about entering characters, see page 51. 6. Press the OK soft key. The memo is saved and then the display shows the memo information. 7. Press the Options soft key to use the following memo options: ♦Send: allows you to send the memo to other people by using the MMS feature. Follow the procedure on page 90. ♦Rename: allows you to change the memo’s name. ♦Delete: deletes the memo. 8.
Delete: allows you to delete the memo. Delete All In this menu, you can delete all of your voice memos. When a confirming message appears, press the Yes soft key. To cancel the deletion, press the No soft key. Memory Status You can check the amount of memory for voice memos. The display shows you the total, free and used space including the number of memos you recorded and the total number of memos you can record. Currency Exchange Using this menu, you can figure out currency conversions. 1.
Network Services These menu functions are network services. Please contact your service provider to check their availability and subscribe to them, if you wish. Call Forwarding This network service enables incoming calls to be rerouted to a number that you specify. Example: You may wish to forward your business calls to a colleague while you are on holidays. You can use the following options to forward voice calls and/or data calls: Forward Always: all calls are forwarded.
The current status displays. If the option has already been set, the number to which the calls are forwarded displays. To Press the activate call forwarding Activate soft key. Go to step 4. change the number to be called Change soft key. Go to step 4. deactivate call forwarding Remove soft key. 3. Enter the number to which the calls are to be forwarded and press the OK soft key. To enter an international code, press the 0 key until the + sign displays.
1. Select the type of calls, voice or data, to which you want to apply the call waiting option by pressing the Up or Down key, and then press the Select soft key. The screen informs you whether call waiting is activated or deactivated. 2. You can activate or deactivate the call waiting feature as necessary by using the Activate or Deactivate soft key respectively. To return to the previous screen, press the Exit soft key. You can also deactivate all call waiting settings by selecting the Cancel All option.
If you select Automatic, you are connected to the first available network when roaming. If you select Manual, the phone scans for the available networks. Go to step 3. 3. Press the Up or Down key until the network you want highlights and then press the OK soft key. You are connected to that network. Caller ID You can prevent your phone number from being displayed on the phone of the person being called. Note: Some networks do not allow the user to change this setting.
Funbox The Funbox menu contains several fun options. WAP Browser Your phone is equipped with a WAP (Wireless Application Protocol) browser to allow you to access and navigate the Wireless Web using your phone. mMode Selecting this menu connects the phone to the network and loads the homepage of the Wireless key Web service provider. You can also press the in Idle mode. The content of the WAP Browser startup homepage depends on your Wireless Web service provider.
Navigating the WAP Browser To Press the scroll through and select browser items Up or Down key until the symbol points to the item, and then press the Select soft key to confirm the selection. select a numbered item corresponding numeric key. return to the previous page Back soft key or the C key. return to the startup homepage key for more than two seconds and select the Home option. For further details about this option, see page 145.
Lower-case character mode (a): allows you to enter lower-case English characters. Note: You can enter special characters in Upper-case or Lower-case Character mode. For details about available characters, see page 55. Selecting and Using Browser Menu Options Various menu options are available when you are using the WAP Browser to navigate the Wireless Web. To access a menu option: 1. Press and hold the key. A menu list displays. 2. Highlight a menu by pressing the Up or Down key. 3.
Show URL: displays the URL address of the Web page to which you are currently connected. It also enables you to set the current site as the startup home page. To Press the set the current page as your startup home page Option soft key and select the Save to Home option. set a bookmark for the current page Option soft key and select the Save to Bookmark option cancel your setting Back soft key. Edit Home: allows you to change the startup home page manually. Enter the URL and press the OK soft key.
1. Select an empty location and press the Options soft key. 2. Enter the address and press the Enter soft key. For further details about entering characters, see page 51. 3. Enter a name for the favorite item and press the Enter soft key. After saving favorite items, you can use the following options by pressing the Options soft key: Goto URL: takes you to the site. Edit: allows you to edit the address and name. Delete: allows you to delete the item.
Homepage URL: set the address of your startup homepage. When the default homepage displays, you can delete it using the C key and enter your own choice. Security: select a data transmission mode. Choose Secure to protect your data against unauthorized access; otherwise, choose Non-Secure. Bearer: select a bearer to be used for each type of network address accessed; GPRS or Data. The remaining options depend on the Bearer setting.
Data Call Type: select a data call type; Analogue or ISDN. Note: The WAP browser settings may vary, depending on the service provider. Contact your service provider for further details. Clear Cache You can clear the information stored in the cache, the phone’s temporary memory which stores the most recently accessed Web pages. Press the Yes soft key to confirm the deletion. Otherwise, press the No soft key. Push Message In this menu, you can receive and access web messages from the server.
Downloading a New Game You can download more games from the web site given by your service provider using the mMode Downloads option. Once you have downloaded games, they are added to the list. Note: Java services may not be available depending upon your service provider. Launching a MIDlet Note: The procedures explained below are for the default games. For downloaded games, the procedure may be different. 1. Scroll to the MIDlet you want on the Games list and press the Launch soft key. 2.
While you are playing a game, to Press the adjust the sound volume Volume keys stop the game and return to the startup screen C key. exit the game key. Viewing MIDlet Information 1. Scroll to the MIDlet you want and press the Info soft key. The display shows information about the MIDlet, such as the file size, application version and its vendor. 2. To scroll to other MIDlet information, press the Navigation keys. 3.
Entering Text If you need to enter text while using a MIDlet, you can use the following input modes: Upper-case character mode (A): allows you to enter upper-case English characters. Lower-case character mode (a): allows you to enter lower-case English characters. Number mode (1): allows you to enter numbers. Symbol mode: allows you to enter symbols. After highlighting a symbol by pressing the Navigation key to insert it.
Images In this menu, you can view the list of pictures downloaded from the web server or received in multimedia messages. You can set the downloaded pictures as the current background image or send them to other phones. If you set a photo as your wallpaper, it displays as My Photo on the list. By pressing the Options soft key, you can use the following options: Rename: allows you to change the name of the image. Delete: deletes the image.
When a confirming message displays, press the Yes soft key to confirm. Memory Status You can check the amount of memory being used and the memory remaining for games, sounds and images. Games: the display shows the total, free and used space and the number of games downloaded. Sounds & Images: the display shows the total, free and used space, including the memory status used by sounds and images.
Solving Problems If you are experiencing problems with your phone, perform the following simple checks before contacting a service professional. This may save you the time and expense of an unnecessary service call. When you switch your phone on, the following messages may appear: Insert SIM Card ♦Check that the SIM card is correctly installed. Phone Locked Enter Password ♦The automatic locking function has been enabled. You must enter the phone’s password before you can use the phone.
“No service,” “Network failure” or “Not done” displays ♦The network connection was lost. You may be in a weak signal area (in a tunnel or surrounded by buildings). Move and try again. ♦You are trying to access an option for which you have not taken out a subscription with your service provider. Contact the service provider for further details.
The audio quality of the call is poor ♦Check the signal strength indicator on the display ( ); the number of bars indicates the signal strength from strong ( ) to weak ( ). ♦Try moving the phone slightly or moving closer to a window if you are in a building. No number is dialed when you recall a Phone Book entry ♦Check that the number has been stored correctly, by using the Phone Book Search feature. ♦Re-store the number, if necessary.
Solving Problems 158
Access Codes There are several access codes that are used by your phone and its SIM card. These codes help you protect the phone against unauthorized use. When requested for any of the codes explained below, enter the appropriate code (displayed as asterisks) and press the OK soft key. If you make a mistake, press the C key one or more times until the incorrect digit is cleared and then continue entering the correct code.
PIN The Personal Identification Number or PIN (4 to 8 digits) protects your SIM card against unauthorized use. It is usually supplied with the SIM card. If you enter an incorrect PIN three times in succession, the code is disabled and cannot be used until you re-enable it by entering the PUK (see below). To See activate/deactivate the PIN Check feature page 120 (Menu 6.5.1). change the PIN page 120 (Menu 6.5.2). PUK The 8-digit PUK (PIN Unblocking Key) is required to change a disabled PIN.
PIN2 The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to access specific functions, such as setting the maximum cost of a call. These functions are available if supported by your SIM card. If you enter an incorrect PIN2 three times in succession, the code is disabled and you cannot access the functions until you re-enable it by entering the PUK2. To change the PIN2, see page 123 (Menu 6.5.7).
Access Codes 162
Health and Safety Information Exposure to Radio Frequency (RF) Signals Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
SAR tests are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network.
FCC certification information for this model phone is attached separation paper. For Body Operation For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with a Samsung-supplied or approved accessory designated for this product or when used with and accessory that contains no metal and that positions the handset a minimum from the body. The minimum distance for this model phone is written in the FCC certification information from the body.
cellular network and the parameters set by the network operator. ♦Battery charging time depends on the remaining battery charge, the type of battery and the charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery. ♦If left unused, a fully charged battery will discharge itself over time.
♦Dispose of used batteries in accordance with local regulations. Always recycle. Do not dispose of batteries in a fire. Road Safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility.
your phonebook takes your attention away from your primary responsibility, driving safely. ♦Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue. ♦Do not engage in stressful or emotional conversations that may be distracting.
safety instructions. Do not connect incompatible products. As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder). Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals.
If you have any reason to suspect that interference is taking place, switch your phone off immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy.
Posted Facilities Switch your phone off in any facility where posted notices require you to do so. Potentially Explosive Environments Switch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch the phone off while at a refueling point (service station).
you should never rely solely on any wireless phone for essential communications (medical emergencies, for example). Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. To make an emergency call: 1. If the phone is not on, switch it on. 2.
Other Important Safety Information ♦Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. ♦Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. ♦Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.
♦Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone. ♦Do not use or store the phone in dusty, dirty moving parts may be damaged. ♦Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. ♦Do not store the phone in cold areas.
Acknowledging Special Precautions and the FCC and Industry Canada Notice Cautions Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received.
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ♦Reorient or relocate the receiving antenna. ♦Increase the separation between the equipment and receiver. ♦Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. SAR Tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
and the user’s body. None compliance to the above restrictions may violate FCC RF exposure guidelines. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http:// www.fcc.gov/oet/fccid after searching on FCC ID A3LSGHE316.
A Guide to Safe and Responsible Wireless Phone Use TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKE ADVANTAGE OF THE UNIQUE COMBINATION OF CONVENIENCE, SAFETY AND VALUE DELIVERED BY THE WIRELESS TELEPHONE. QUITE SIMPLY, THE WIRELESS PHONE GIVES PEOPLE THE POWERFUL ABILITY TO COMMUNICATE BY VOICE-ALMOST ANYWHERE, ANYTIMEWITH THE BOSS, WITH A CLIENT, WITH THE KIDS, WITH EMERGENCY PERSONNEL OR EVEN WITH THE POLICE.
users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need. When it comes to the use of wireless phones, safety is your most important call. Wireless Phone “Safety Tips” Below are safety tips to follow while driving and using a wireless phone which should be easy to remember: 1.
incoming call at an inconvenient time, if possible, let your voice mail answer it for you. 4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road. 5. Do not take notes or look up phone numbers while driving.
they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations-with your phone at your side, help is only three numbers away.
accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number. Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens.
between the phone and the user s head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person’s RF exposure decreases rapidly with increasing distance from the source.
those studies, or in determining the reasons for inconsistent results. 3. What is FDA’s role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user.
the federal level. The following agencies belong to this working group: ♦National Institute for Occupational Safety and Health ♦Environmental Protection Agency Federal Communications Commission ♦Occupational Safety and Health Administration ♦National Telecommunications and Information Administration ♦The National Institutes of Health participates in some interagency working group activities, as well. FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC).
conducted to address important questions about the effects of exposure to radio frequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world.
(RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance.
example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. 7.
believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike “hand-free” kits, these so-called “shields” may interfere with proper operation of the phone.
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time.
cancer causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don’ t know with certainty what the results of such studies mean for human health. Three large epidemiology studies have been published since December 2000.
answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used. 12.
International Commission on Non-Ionizing Radiation Protection: http://www.icnirp.de National Radiation Protection Board (UK): http://www.nrpb.org.uk Updated 4/3/2002: US Food and Drug Administration http://www.fda.
STANDARD LIMITED WARRANTY What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.
resulting from the use of Product in conjunction with accessories, products, or ancillary/peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of Product, or (g) Product used or purchased outside the United States or Canada.
replace the defective Product. SAMSUNG may, at SAMSUNG’s sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product or replace Product with a rebuilt, reconditioned or new Product. Repaired/replaced leather cases, pouches and holsters will be warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 days, whichever is longer.
♦COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT.
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER’S EXCLUSIVE REMEDY.
DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE. This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and SAMSUNG’s Product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG.
Glossary To help you understand the main technical terms and abbreviations used in this booklet, and to take full advantage of the features of your mobile phone, here are a few definitions: Active Folder Ability to answer a call simply by opening the phone. Call Forwarding Ability to reroute calls to another number. Call Holding Ability to put one call on standby while answering or making another call; you can then switch between the two calls, as required.
EMS (Enhanced Message Service) An adaptation of the Short Message Service (SMS) that allows you to send and receive ring tones and the service provider’s logo, as well as combinations of simple media to and from EMS-compliant handsets. Because EMS is based on SMS, it can use SMS centers the same way that SMS does. EMS works on all Global System for Mobile communications (GSM) networks.
promoted for and geared heavily to the Web, both for public Web sites and Intranets. When a Java program runs from a Web page, it is called a Java applet. When it is run on a mobile phone or pager, it is called a MIDlet. MMS (Multimedia Message Service) A message service for the mobile environment, standardized by the WAP Forum and the 3rd Generation Partnership Program (3GPP).
provider with the SIM card. It may be a four to eightdigit number and can be changed, as required. PUK (PIN Unblocking Key) Security code used to unlock the phone when an incorrect PIN has been entered three times in succession. The eight-digit number is supplied by the service provider with the SIM card. Roaming Use of your phone when you are outside your home area (when traveling for example).
Soft Keys Two keys marked and on the phone, the purpose of which: ♦varies according to the function that you are currently using. ♦is indicated on the bottom line of the display just above the corresponding key. Voice Mail Computerised answering service that automatically answers your calls when you are not available, plays a greeting (optionally in your own voice) and records a message.
Glossary 206
Index A , , Access codes • 159 Active folder • 124 Alarm • 127 Alert type • 113 Alphabet mode, text input • 55 Answering call • 30 second call • 61 Anykey answer • 124 Auto redial • 124 , , , , , , , B , Background image • 117 Backlight description • 17 time, set • 118 Battery caring • 165 charging • 23 installing • 23 low indicator • 25 removing • 21 Brightness, display • 118 Broadcast messages • 82 Browser, WAP • 143 , , , , , , , , , , C , Calculator • 132 Calendar memos copying • 13
, , Delivery reports, message • 80 93 Dialed calls • 100 Display backlight • 17 external • 17 icons • 16 layout • 15 settings • 117 DTMF tones, send • 60 Inbox, messages multimedia • 85 text • 73 International calls • 27 E Key volume • 30 Keypad tones selecting • 114 sending • 59 Keys description • 12 location • 11 , , , , , , , J , Java service • 149 , K , , , Earpiece volume • 29 Emergency calls • 8 EMS (Enhanced Message Service) • 73 Error tone • 116 External display • 17 , , , , F
, , , , text • 73 voice • 81 web • 149 MIDlets • 150 Minute minder • 116 Missed calls • 31 99 MMS (Multimedia Message Service) • 85 Morning call • 127 Multimedia messages creating/sending • 90 deleting • 87 89 reading • 85 88 setting • 91 93 Multi-party calls • 62 Muting all sounds • 58 key tones • 59 microphone • 58 , Names entering • 51 searching/dialing • 44 Network selection • 141 Network services • 139 Numbers, phone searching/dialing • 44 storing • 37 keys • 12 layout • 11 locking • 121 password •
, , , , , , Ring tone • 113 Ring type • 113 Ring volume • 113 Roaming • 141 , , S Safety information • 163 precautions • 7 Schedule • 128 SDN (Service Dialing Numbers) • 49 Searching, Phone Book • 44 Security, calls • 120 Sent messages multimedia • 88 text • 74 Service light • 118 Silent mode • 33 SIM card installing • 21 SMS (Short Message Service) inbox • 73 outbox • 74 Soft keys • 35 Sound settings • 113 Sounds, downloaded • 152 Switching on/off microphone • 58 phone • 25 , , , , , , , , , ,
, World time • 131 Writing messages multimedia • 90 text • 76 , , Index 211
Index 212
213 ➄ Press the Select soft key. ➃ Scroll using the Up and Down keys through the list of the options until the one you want is selected. ➂ Press the Select soft key. ➁ Scroll using the Up and Down keys through the list of the menus until you reach the menu you want. ➀ Press the Menu soft key. Each of the two soft keys ( and ) perform the function indicated by the text above it on the bottom line in the display. Access the Menu Functions ➀ Open the phone and press the View soft key.
Adjust the Volume Choose the Alert Type Take a Photo Press the or key on the left side of the phone. ➀ Select the Alert Type menu option (Menu 5.3). ➁ Select an option: • Light Only • Melody • Vibration • Vibra+Melody ➂ Press the Select soft key. • With the folder open ➀ Press and hold the Camera key. ➁ Press the Up key or Camera key. ➂ Press the Save soft key. • With the folder closed ➀ Press and hold the Camera key. ➁ Press the Camera key.
