ADT Security Hub User Guide
Contents This User Guide provides an introduction to the key features of the ADT Security Hub. Visit SmartThings.com/Support-ADT for more detailed information and customer support.
A ADT Security Hub ADT Security Hub Home button Home Screen Emergency Button Home Button Use the Home button to wake your ADT Security Hub from sleep mode or to return to the Home screen. The Home button will change color to show the status of your system: • No lights: The system is not ready to be armed. One or more protected doors or windows are open. • Green: The system is ready to be armed. All protected doors and windows are closed. • Flashing green: The system is ready to be armed.
ADT Security Hub ADT Security Hub Emergency button Manually notifying ADT Use the Emergency button to manually notify ADT of a panic, fire, or emergency event. Press the Emergency button to manually notify ADT of a panic, fire, or emergency event. Requires an optional ADT professional monitoring service. Visit SmartThings.com/ADT for more information. The Emergency button changes color to show the status of your system: • No lights: The emergency button is not available.
ADT Security Hub Panic, Fire, and Emergency buttons on your ADT Security Hub: ADT Security Hub System icons The following icons may appear at the top of the touchscreen: 4 Power Connected Dim Touchscreen Power Not Connected System Sounds On Low Backup Battery System Sounds Off Incoming Messages (Touch to see messages) (Touch to dim screen) (Siren still active)
ADT Security Hub B Intrusion Detection Local walk test Introduction It is strongly recommended that you perform a weekly test of your ADT Security Hub, detectors, and alarms: Intrusion detection is provided by devices such as the ADT Door and Window Detector or the ADT Motion Detector. These devices are only active when armed by your ADT Security Hub. 1. Select System Settings from the Home screen. 2. Enter the Master User Code. 3. Select Walk Test. 4.
Intrusion Detection Intrusion Detection Arming the system Press the Arm Stay button to arm the system when people or large pets will remain in the house. This will arm all ADT Door and Window Detectors but will not arm any ADT Motion Detectors. The alarm will be activated if a protected door or window is opened. Press the Arm Away button to arm the system when everyone leaves the house. This will arm all ADT Door and Window Detectors, and all ADT Motion Detectors.
Intrusion Detection Intrusion Detection Arming the system and bypassing detectors If you try to arm the system while protected doors or windows are still open, the ADT Security Hub will display a list of sensors that are not ready to be armed. Silence Button Disarm Button You can press the Silence button to silence the countdown, or you can press the Disarm button to cancel the countdown and leave the system unarmed.
Intrusion Detection Intrusion Detection You can close the open doors or windows to remove the warnings, or you can bypass these sensors by pressing the Bypass All button and entering your user code. Bypassed sensors do not protect doors or windows, and will not activate the alarm siren, notify ADT, or send an alert to your smartphone in the event of an intrusion. Bypassed sensors revert to normal operation when the alarm system is next armed.
Intrusion Detection Intrusion Detection In the event of an intrusion Areas protected by an ADT Motion Detector The alarm siren will be activated immediately and continue sounding for 4 minutes, or until a correct user code is entered on the ADT Security Hub to disarm the system. Doors and windows protected by an ADT Door and Window Detector Quick Exit Button You can also press the Quick Exit button to temporarily disarm protected doors and start a 60-second exit delay countdown.
Intrusion Detection Homes protected by an optional ADT Professional Monitoring Service Your ADT Security Hub will notify ADT as soon as the alarm siren is activated and an operator will respond according to the terms of your monitoring service. Visit SmartThings.com/ADT for more information about ADT professional monitoring services. In the event of a false alarm If the system is not disarmed in time, the alarm siren will be activated and ADT will contact you to confirm that it is a false alarm.
C Life Safety Protection Life Safety Protection Introduction In the event of smoke or extreme temperatures Life safety protection is provided by devices such as the ADT Smoke Alarm, the ADT Carbon Monoxide Alarm and the ADT Water Leak Detector. These devices are always active and monitored by your ADT Security Hub.
Life Safety Protection To protect yourself and occupants do the following: Life Safety Protection In the event of carbon monoxide • If flames or smoke are present, yell "Fire!" to alert all occupants of a fire. • Immediately evacuate all occupants from the premises and remain at a safe distance away from the premises. • The alarm siren on the ADT Carbon Monoxide Alarm will be activated.
Life Safety Protection In the event of a critical carbon monoxide alert, you should immediately open a window or door to get fresh air. Evacuate all occupants from the premises and call 911 or the fire department. Remain at a safe distance and do not re-enter the premises until it has been deemed safe by emergency officials. Read the user guide that came with your ADT Carbon Monoxide Alarm to learn more about how the alarm responds to low or moderate levels of carbon monoxide.
Security Codes Security Codes 3. Select Users. 4. Tap next to Master User. 5. Tap next to Code. 6. Enter a new Master User Code and then select Next. 7. Enter the new Master User Code again as confirmation and then select Done. 8. Press the Home button to return to the Home Screen. The Master User Code must be unique and cannot be the same as any of the User Codes. User codes You can create up to 98 unique User Codes, allowing different people to arm and disarm the system.
Security Codes E By default, each User Code is valid at any time of the day and on any day of the week. To create a specific schedule for when you want a User Code to be valid: System Settings The following settings are accessible from the System Settings menu. Sounds 1. Select System Settings from the Home screen. 2. Enter the Master User Code. 3. Select Users. • Keypad tones 4. Tap • Voice and chime responses 5. Scroll down and tap • System responses 6.
System Settings • Adjust the length of time before the touchscreen goes into sleep mode • Deactivate the touchscreen for 30 seconds so that it can be cleaned System Tests Use this setting to run diagnostic tests on the: • ADT Security Hub • Detectors • Alarms Cell Radio Swap Use this setting if the LTE cellular data backup module needs replacing. F Transferring Your ADT Security Hub If you want to transfer your ADT Security Hub to another person, visit SmartThings.
QR Codes QR Codes Once you have setup your detectors and alarms, keep the QR codes here for future reference. Once you have setup your detectors and alarms, keep the QR codes here for future reference.
SmartThings, Inc., 665 Clyde Ave, Mountain View, CA 94043, USA. Information in this document is subject to change without notice. Copyright 2017 SmartThings, Inc. All rights reserved. ADT and the ADT logo are marks and/or registered marks of ADT. Unauthorized use is strictly prohibited. Revised 06/17. P/N 10016958.
