Quick Guide

English14
Installation
Installation
STEP 5 Level the dishwasher
Normal Tall-kitchen
(Insert the sub foot)
0-1⁄" (0-30 mm)
⁄"-2⁄" (20-60 mm)
You can adjust the height of the dishwasher
to level it. Note that in these steps, the
dishwasher is currently inserted halfway.
1. Use the level to check if the dishwasher
is level.
2. When adjusting the front height, use the
regular foot for heights lower than 1⁄".
• To lower the height, turn the foot
clockwise.
• To raise the height, turn the foot counter
clockwise.
3. To adjust the rear height, insert the
screwdriver in the bottom center of the
dishwasher.
• To lower the height, turn the
screwdriver clockwise.
• To raise the height, turn the screwdriver
counter clockwise.
CAUTION
Do not use a hammer drill to adjust the
rear leg.
Min. ⁄"
(5 mm)
4. Leave at least a ⁄" (5 mm) space
between the top of the dishwasher and
the bottom of the countertop.
5. When levelling is complete, check that
the door opens and closes properly.
DW50T6060US_AA_DD81-03056A-00_EN.indd 14 2020-05-27 오후 6:17:48