FlexDry™ User manual DV*55M9600* DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Contents Safety information 4 Contents What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING Important safety precautions Warnings Cautions 4 4 9 9 11 11 Regulatory notice 13 Installation 16 What’s included Installation requirements Step-by-step installation Vent blockage test Exhaust ducting guide Door reversal 16 19 27 34 35 36 Before you start 39 Sort and load Lint filter Drying guidelines Rack guidelines 39 39 40 41 Operations 43
56 General cleaning and maintenance instructions Delicate Dryer Tumble Dryer 56 58 59 Troubleshooting 60 Checkpoints Samsung Smart Home Information codes 60 63 64 Specifications 66 Fabric care chart Protecting the environment Specification sheet Cycle chart 66 67 68 69 English 3 DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features. What you need to know about the safety instructions Safety information Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.
Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it. Safety information WARNING - Risk of Fire • Clothes dryer installation must be performed by a qualified installer. • Install the clothes dryer according to the manufacturer’s instructions and local codes.
Safety information WARNING - To reduce the risk of fire or explosion: Safety information • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode.
WARNING - Fire or explosion hazard Safety information • Failure to follow safety warnings exactly could result in serious injury, death or property damage. • Do not store or use gasoline or other flammable vapors and liquids near this or any other appliance. • Installation and service must be performed by a qualified installer, service agency, or the gas supplier. • Do not install a booster fan in the exhaust duct. SAVE THESE INSTRUCTIONS English 7 DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Safety information WARNING - What to do if you smell gas: Safety information • • • • • • Do not try to light any appliance. Do not turn on the appliance. Do not touch any electrical switch. Do not use any phone in your building. Clear the room, building or area of all occupants. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. • If you cannot reach your gas supplier, call the fire department.
CALIFORNIA PROPOSITION 65 WARNING WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov. Safety information Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using this appliance. 2.
Safety information 13. Do not use heat to dry articles containing foam rubber or similarly textured rubberlike materials. 14. Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt. Safety information 15. The interior of the appliance and exhaust duct should be cleaned periodically by qualified service personnel. 16. Do not place items exposed to cooking oils in your dryer.
Warnings WARNING • Cautions CAUTION • • • • • • • • • • • • • • • • Do not allow children or pets to play on, in, or in front of the appliance. Close supervision is necessary when the appliance is used near children and pets. Before discarding or removing your dryer from service, remove the door to the drying compartment to prevent children or animals from becoming trapped inside. Do not reach into the appliance when the drum is moving.
Safety information • • Safety information • Do not place items in your dryer that have been spotted or soaked with vegetable oil or cooking oil. Even after being washed, these items may contain significant amounts of these oils. Residual oil on clothing can ignite spontaneoulsy. The potential for spontaneous combustion increases when items containing vegetable oil or cooking oil are exposed to heat. Heat sources such as your dryer can warm these items, allowing an oxidation reaction in the oil to occur.
Regulatory notice FCC Notice CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: This device may not cause harmful interference, and 2. This device must accept any interference received including interference that cause undesired operation. Regulatory notice 1.
Regulatory notice IC Notice The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.
Open Source License Notice The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by sending an email to mailto:oss.request@samsung.com. It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM; a minimal charge will be required. Regulatory notice The following URL http://opensource.samsung.
Installation This FlexDry™ dryer must be installed by a qualified technician. The installer is responsible for connecting the dryer to the main power while observing the relevant safety regulations of your area. What’s included Make sure all the supplied parts and accessories are included in the product package (see page 17). If you have a question about the dryer or the accessories, contact a local Samsung service center or the retailer.
Accessories (supplied) Water hose (Canadian elec. models only) Flexible rack Dryer-sheet case Short water hose Installation Y connector Accessories (not supplied) You must purchase these items at a local service center. Pedestal WARNING Packing materials can be dangerous to children. Keep all packing materials (plastic bags, polystyrene, etc.) out of children’s reach. English 17 DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Installation Tools required (not supplied) Pliers Cutting knife Pipe wrench (gas models only) Nut screwdriver Level Philips screwdriver Duct tape Wrench Installation LPG-safe compound or Teflon Tape (for gas installation) 18 English DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Installation requirements Read through the following instructions before installing the dryer and keep this manual for future reference. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. • • • • A grounded electrical outlet. A power cord for electric dryers (except in Canada).
Installation Alcove or closet installations WARNING • • • The dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or closet. No other fuel-burning appliance should be installed in the same closet as the dryer. Place the dryer at least 18 in. (460 mm) above the floor for garage installation. Minimum clearances between the dryer and adjacent walls or other surfaces: Sides 1 in. (25 mm) Rear 5.9 in. (150 mm) Top 21 in. (533 mm) Closet front 2 in.
Side by side installation C A B B Installation A D A E A 1 in. (25 mm) D 32.5 in. (825 mm) B 27 in. (686 mm) E 2 in. (50 mm) C 21 in. (533 mm) F 5.9 in. (150 mm) F A A 61 in. (1550 mm) English 21 DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Installation Ducting requirements Recommended Use only for short-run installation Weather hood type Installation 4” (10.2 cm) 2.5” (6.4 cm) No. of 90° elbows Rigid Rigid 0 80 ft. (24.4 m) 74 ft. (22.6 m) 1 68 ft. (20.7 m) 62 ft. (18.9 m) 2 57 ft. (17.4 m) 51 ft. (15.5 m) 3 47 ft. (14.3 m) 41 ft. (12.5 m) NOTE * Use a 4-inch (10.2 cm) diameter rigid aluminum or galvanized steel duct.
Exhausting requirements Outside the United States and Canada The dryer must not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl space, or a concealed space of a building. Exhausting the dryer to the outside will prevent large amounts of lint and moisture from being blown into the room. • • In the United States and Canada • • • • • • WARNING • • You must exhaust the dryer to the outside to reduce the risk of fire when you install the dryer in an alcove or closet.
Installation • Installation • • • • Gas dryers are equipped with a burner vent for use with natural gas. If you plan to use your dryer with LP (liquid propane) gas, it must be converted for safe and proper performance by a qualified service technician. (LNG models only) You must check the burner of your model and use the proper LP Kit accordingly. To check the detail information of the burner, open the door and check the rating label location on the door frame.
Electrical requirements Grounding The wiring diagram is located on the plate under the control panel or rear frame. This dryer must be grounded. In the event of a malfunction or breakdown, the ground will reduce the risk of electrical shock by providing a path of least resistance for the electrical current. WARNING • • Gas models WARNING • • • Your dryer has a cord with an equipment-grounding conductor and a grounding plug.
Installation • If a power cord is not used and the electric dryer is to be permanently wired, the dryer must be connected to a permanently grounded metal wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the dryer. Electrical connections Installation Before operating or testing, follow all grounding instructions in the Grounding section.
Step-by-step installation Make sure you have a qualified technician install the dryer. Step by step installation instructions start below. STEP 1 Install the exhaust system 1. Select a location and move the dryer to the site. For easy access, we recommend you install the dryer in the same location as your washer. 2. To change the door direction, see Door reversal. 3. Install the exhaust system as instructed in the Exhaust ducting guide section.
Installation STEP 3 Connect the electrical wiring First, read through the Electrical requirements section, and then follow these steps. 3-wire system 1. Loosen or remove the center terminal block. 2. Connect the neutral wire (white or center wire) of the power cable to the center, silver-colored terminal screw of the terminal block. Tighten the screws. 3. Connect the other wires to outer terminal block screws. Tighten the screws. 4. Tighten the strain relief screws. 5.
4-wire system 1. Remove the external ground connector’s screw, and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION • D E F (N) A B L2 L1 • C Installation A. External ground connector To connect the ground wire to the neutral position without through contact A (cabinet ground), contact a technician. This is not user serviceable. Ring-type terminals are recommended. If using strap terminals, make sure they are tightened. B.
Installation • • • Remove the terminal block cover plate. Insert the power cord with a UL-listed strain relief through the hole provided in the cabinet near the terminal block. A strain relief must be used. Do not loosen the nuts already installed on the terminal block. Be sure they are tight. Use a 3/8” (1 cm) deep well socket. Since january 1, 1996, The national electric code requires that new wiring (not existing) utilize a 4-wire connection to this dryer.
Using the short hose as an extension Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose. Then, connect the short hose (B) to the cold water tap. Turn the coupling by hand until it is tight. 2. Using pliers, tighten the coupling an additional two-thirds turn. Do not overtighten. You can damage the coupling. 3. Connect the Y connector (A) to the brass male end of the short hose. Turn the coupling by hand until it is tight. 4.
Installation STEP 5 Level the dryer To ensure optimal performance, the dryer must be level. 1. A Using a level (A), check if the dryer is level side to side and then front to back. If the dryer is not level, adjust the leveling feet (B) at the bottom of the dryer. Then, check if the dryer is level again.
STEP 6 Power on (Gas models) Make sure all gas connections, the exhaust line, and all wiring is connected correctly. Then, plug the power cord into a power source and check the dryer’s installation and operation using the final checklist in Step 7 below. STEP 7 Final check When installation is complete, confirm that: • • • • • The dryer is plugged into an electrical outlet and grounded properly. The exhaust ductwork is connected and the joints are taped.
Installation Vent blockage test After the dryer is installed, start the Vent Blockage Test to check if the duct system is properly installed. The Vent Blockage Test automatically detects the status of the ducts and reports any blockage or problems. Proper ducting can reduce drying time and save energy. NOTE The Vent Blockage Test must run with the dryer in a cool state. If the dryer warms up after the installation check, run the AIR FLUFF cycle for several minutes to reduce its internal temperature.
NOTE • • • During or after the test, the internal drum is hot. Use caution to prevent burns. The Vent Blockage Test is used to check for problems to the current duct system when the dryer is installed for the first time. If the test result displays “CLg” (the duct system is blocked ), refer to the Ducting requirements section on page 22 and the Exhaust ducting guide section below, and then take proper measures to correct any problems. If the test is suspended, it could result in incorrect results.
Installation Door reversal 1. Unplug the power cord. 2. Remove two door hinge screws. 3. Lift the door and remove it. NOTE There is a screw on the back side of the hinge that will support the door as you unscrew the hinge screws. Remove the two screws that are above and below the cut-out in the frame front. 5. Remove the two screws above and below the lever holder on the opposite side of the door opening. 6.
7. Re-insert the two screws that held the lever holder into the same screw holes, and then tighten. 8. Remove the single screw from the back of the door hinge. NOTE 9. Insert the screw you just removed into the other screw hole on the back of the door hinge, and then tighten. 10. Place the door on the other side, and then reattach it to the dryer. NOTE Insert the head of the screw on the back of the hinge into the hole above the cut out in the frame, and then slide the door hinge down until it stops.
Installation 11. Push the lever holder into the cut out on the other side of the door opening. Insert screws, and then tighten as shown. 12. Re-attach the remaining screws to the remaining holes above and below the lever holder, and then tighten. Installation 38 English DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Before you start Here are a few things you should know before starting your dryer. Sort and load • • • • Put one wash load in the dryer at a time. Do not mix heavy and lightweight items together. To improve drying efficiency for one or two items, add a dry towel to the load. For best results, untangle items before inserting them into the dryer. • • • • Overloading causes uneven drying and wrinkling. Unless recommended on the care label, do not dry woolens or fiberglass items.
Before you start Drying guidelines The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference. Cycle Description Bedspreads & Comforters Follow the care label instructions or dry using NORMAL. • Make sure the item is thoroughly dry before using or storing. • May require repositioning in the drum to ensure even drying.
WARNING Do not dry: • • • Fiberglass items (curtains, draperies, etc.) Wool, silk items, unless recommended on the label Items spotted or soaked with vegetable or cooking oils Rack guidelines Flexible rack The flexible rack is designed to dry delicate items that are not suitable for or cannot be dried in the Tumble Dryer. To use the flexible rack Locate the rack supports (x4) in each corner of the Delicate Dryer. Push down the lower area of the front 2 supports to unfold. The rear 2 supports are fixed.
Before you start 3. B Insert a folded dryer sheet in dryersheet case (B), and then put the case at the top center of the rack. Make sure the dryer-sheet case faces the triangle mark on the Delicate Dryer because only the arrow area has the built-in magnet to secure the filter. NOTE If using a large-sized dryer sheet, the dryer-sheet case may not close normally. However, this does not affect the drying performance. Before you start Bulky items are easily wrinkled in the Delicate Dryer.
Operations This FlexDry™ dryer features the Delicate Dryer and the Tumble Dryer for your convenience. The Delicate Dryer is a top load dryer that is designed to dry relatively small loads while the Tumble Dryer is a drum loader you can use to dry normal or relatively heavy loads. The main panel is divided into 2 independent control panels. WARNING To reduce the risk of fire, electric shock, or injury, read the Safety information section before operating this dryer.
Operations Cycle overview Each cycle of the Delicate Dryer has a predefined drying time. You must adjust the drying time manually if necessary. To extend the drying time, use Time+.
Recommended for the Delicate Dryer • • • • • The drying time depends on the load and the item type. To shorten the drying time, use Super Speed. Overloads may delay the drying time. To extend the drying time, use Time+. For manual-wash items, use a towel to remove moisture from the items before drying. For machine-washable items, you can reduce the drying time by choosing a higher spinning rate. Arrange items as even and straight as possible. Overlapped items may not be dried well.
Operations Caution Clothing with accessories or hooks may get stuck in the mesh of the rack. • Clothing with accessories must face upwards. • Clothing with hooks must be hooked up before being placed. Operations Not Recommended for the Delicate Dryer Do not dry shoes, bags, down/fur products, rugs, carpets, or bulky items in the Delicate Dryer. Use the Tumble Dryer for normal items (ex: blue jeans, bulky cotton items, towels, etc.) 46 English DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Tumble Dryer Control panel 01 02 04 08 11 09 10 05 06 12 07 03 02 POWER Press to turn the Tumble Dryer on or off. 03 START/PAUSE Press to start operation or press to stop operation temporarily. 04 Status bar The status bar shows current cycle information and estimated time remaining or an information code if the Tumble Dryer needs to be checked. 05 Dry Level Operations 01 Cycle buttons Each Cycle button activates three separate cycles.
Operations Temperature can only be adjusted in TIME DRY cycle. Press Temp. to change the temperature of the current cycle. High: For sturdy cottons or those labeled Tumble Dry. 06 Temp. Medium: For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry Medium. Low: For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm. Extra Low: Provides the lowest heated drying temperature possible. 07 Time Press Time to select a drying time for the selected cycle.
12 Smart Control (Elec.) / Smart Monitor (Gas) After connecting the Tumble Dryer to your home network using the Samsung Smart Home app, you can control or monitor the dryer remotely. When started, the Smart Control (Smart Monitor) indicator blinks. The dryer enters waiting mode and waits for remote commands. Cycle overview Sensor Dry Cycle NORMAL HEAVY DUTY DELICATES PERM PRESS Description • • For most fabrics including cottons and linens.
Operations Steam Cycles Cycle Description • Use to smooth out wrinkles and reduce odors in loads of one to four items. With this cycle selected, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. Before removing the laundry, confirm that the laundry load is dry. • For best results, load 2-3 items at once. You can extend the drying time by a minimum of 20 minutes, depending on the item type or load.
Simple steps to start 03 01 04 06 05 01 05 06 03 04 1. Press POWER on the control panel of a desired dryer (Delicate, Tumble) to turn the dryer on. 2. Put the items you want to dry into the dryer. 3. Select a cycle. 4. Change the cycle settings (temperature and/or dry level) as appropriate to the items. 5. Select cycle options as needed. 6. Press START/PAUSE. Operations To change the cycle during operation 1. Press START/PAUSE to stop operation temporarily. 2.
Operations This product is a smart dryer that supports the Samsung Smart Home service. The amount of time the EZ setup function (for connecting the dryer to your network) can take to complete the network connection varies, depending on your network conditions. Samsung Smart Home Installation Visit the Google Play Store, Galaxy Apps, or Apple App Store and search for “Samsung Smart Home”. Download and install the Samsung Smart Home app provided by Samsung Electronics to your smart device.
Getting started Using Samsung Smart Home, you can control your dryer from your smart device remotely. For improved performance, the content and design of the app is subject to change without notice. 1. Launch the Samsung Smart Home App on your smartphone. 2. If ‘Dryer’ is not listed, tap Add Device > Select other device > Dryer on the app screen. 3. Press and hold Smart Control on your dryer’s control panel for more than 5 seconds until the ‘AP’ message appears on the display. 4.
Operations Special features Child Lock To prevent children or infants from accidently starting the dryer or setting any of the dryer’s functions, Child Lock locks all buttons except for the POWER button. Note that each dryer operates independently and has its own Child Lock function. To activate the Child Lock • Press and hold Dry Level and Temp. (or Time+ and Air Dry for the Delicate Dryer) simultaneously for 3 seconds. Then, press START/PAUSE to activate.
Smart Care The Smart Care function helps you diagnose and troubleshoot your dryer if it has a problem. To enable this function, you must first download the Samsung Smart Dryer app from the Play Store or the Apple Store, and then install it on a mobile device that has a built-in camera. The Smart Care function has been optimized for Galaxy and iPhone series devices. (It is not supported by some models.) As the dryer operates, it runs a self-diagnosis function in the background.
Maintenance Keep this your FlexDry™ dryer clean to prevent decreased performance and to lengthen its life. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. General cleaning and maintenance instructions Main panel • • • • Clean with a soft, damp cloth. Do not use abrasive substances.
Vent sensor The dryer features a vent sensor that detects and notifies you when it is time to clean the ductwork. The indicator lets you know the status of the duct. Level 0 Indicator Off Status Action The ductwork is not clogged. - • 1 On • • 2 Blinking • The duct or lint filter is clogged. High pressure being applied to the duct because the duct is too long or bent. The duct or lint filter is severely clogged.
Maintenance Delicate Dryer Flexible rack • • If you use the flexible rack, make sure to clean the rack after every use so that it is readily available for future use. Clean the rack with neutral cleaning agents and running water. Upper recesses • • • Maintenance • Clean the left and right rear recesses of the Delicate Dryer after every use. Locate the recesses in the rear corners of the Delicate Dryer, and then remove the recess covers on both sides.
Tumble Dryer Stainless steel drum • Clean the drum after every use. • To clean the stainless steel drum, use a damp cloth with a mild, non-abrasive cleaner suitable for easily marred surfaces. Remove cleaner residue and dry with a clean cloth. Drying rack • If you used the lower drying rack, make sure to clean the rack after every use so that it will be readily available for future use. • Clean the drying rack with neutral cleaning agents and running water.
Troubleshooting Checkpoints If the dryer operates abnormally, first check the list of problems in the table below and try the suggested actions. Symptom Action • • Does not run. • • • • • • Does not heat. • • • • • Troubleshooting • Does not dry. • • • • • • • Make sure the door is latched shut. Make sure the power cord is plugged into a live electrical outlet. Check your home’s circuit breakers or fuses. Press START/PAUSE again if the door was opened during a cycle. Clean the lint filter.
Symptom Is noisy. Action • Check the load for objects such as coins, loose buttons, nails, etc. Remove promptly. • It is normal to hear the dryer gas valve or heating element cycle on and off during the drying cycle. Make sure the dryer is leveled properly as outlined in the installation instructions. It is normal for the dryer to hum due to the high velocity of air moving through the dryer drum, fan, or exhaust system. • • • Dries unevenly. • • • Has odors. • • Lint on clothes.
Troubleshooting Symptom Action Items still wrinkled after Wrinkle Prevent (Wrinkle Away, Wrinkle Release). • • • Small loads of 1 to 4 items work best. Load fewer items. Load similar-type items. Take out the items immediately after drying is complete. • This is steam condensation. The dripping water will stop after a short time. • Sprayed water is difficult to see when the door is closed.
Samsung Smart Home Symptom I could not find “Samsung Smart Home” in the app market. The Samsung Smart Home app fails to operate. The Samsung Smart Home app is installed but is not connected to my dryer. Could not log into the app. An error message appears when I try to register my dryer. • The Samsung Smart Home app is available for smartphones that run Android 4.0 (ICS) or higher, or iOS 8.0 or higher. • The Samsung Smart Home app is available for applicable models only.
Troubleshooting Information codes If the dryer fails to operate, you may see an information code on the control panel. To determine what you should do, check the list of codes in the table below, and then try the suggested actions. Code Delicate Dryer Tumble Dryer 1 dC dC Action Operating the dryer with the door open. 1 FC FC 1 AC AC • • Make sure the door is properly closed. Make sure laundry is not caught in the door. Invalid power source frequency. • Try restarting the cycle.
Code Delicate Dryer Tumble Dryer 1 AC7 - Action Electronic Control Problem [Invalid Communication (Delicate Dryer MAIN <-> Tumble MAIN PBA)]. If any information code keeps appearing on the screen, contact a Samsung service center. Troubleshooting English 65 DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Specifications Fabric care chart The following symbols provide garment care direction. The clothing care labels include symbols for drying, bleaching, ironing, and dry cleaning. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to optimize garment life and reduce laundering problems.
Iron dry or steam temperatures Dry-clean High Dry-clean Medium Do not dry-clean Low Line dry / Hang to dry Warning symbols for laundering Drip dry Dry flat Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Do not iron Protecting the environment This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations.
Specifications Specification sheet F A B E D C Front loading dryer Type DV*55M9600* Capacity (Cu.ft) A. Height-top door opened B. Height-top door closed C. Width Dimensions 7.5 Product-inches (cm) 61 (155.0) Required for Installation-inches 63.5 Product-inches (cm) 46.9 (119.2) Required for Installation-inches - Product-inches (cm) 27 (68.6) Required for Installation-inches 29 Product-inches (cm) 32.5 (82.5) D. Depth Specifications E. Depth with door open 90° F.
Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about ¾ full. Do not add items over this level as they need to tumble freely. • Medium load : Fill the drum to about ½ full. • Small load : Fill the drum with 3-5 items, not more than ¼ full.
Specifications NOTE • : factory setting, : can be selected Cycle Temperature setting High Medium Low Time setting NORMAL HEAVY DUTY BEDDING PERM PRESS DELICATES ACTIVE WEAR TIME DRY Extra Low AIR FLUFF REFRESH WRINKLE AWAY STEAM SANITIZE Options Cycle Anti Static Mixed Load Bell Wrinkle Prevent NORMAL HEAVY DUTY PERM PRESS DELICATES BEDDING Adjust Time ACTIVE WEAR AIR FLUFF T
LIMITED WARRANTY (U.S.A.) SAMSUNG DRYER LIMITED WARRANTY TO ORIGINAL CONSUMER PURCHASER WITH PROOF OF PURCHASE AND/OR PROOF OF DELIVERY This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
LIMITED WARRANTY (U.S.A.
LIMITATION OF REMEDIES YOUR SOLE AND EXCLUSIVE REMEDY IS PRODUCT REPAIR, PRODUCT REPLACEMENT, OR REFUND OF THE PURCHASE PRICE AT SAMSUNG’S OPTION, AS PROVIDED IN THIS LIMITED WARRANTY.
Warranty (CANADA) SAMSUNG DRYER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product and shall not apply to the following: damage that occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning, or other acts of nature or God; use of products, equipment, systems, utilities, services, par
Warranty (CANADA) Some provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from province to province. To obtain warranty service, please contact SAMSUNG at: Samsung Electronics Canada Inc.
Memo DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Memo DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Memo DC68-03381H-13_IB_FlexDry_DM9600M_EN_230705.
Scan this with your smartphone This product qualifies for ENERGY STAR in the factory default “Normal + Eco dry” setting. If you change the factory default setting or enable other features, power consumption could increase and exceed the limits qualified for ENERGY STAR. QUESTIONS OR COMMENTS? COUNTRY CALL U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support 1-800-SAMSUNG(726-7864) www.samsung.com/ca/support (English) www.samsung.