Operation Manual

System Setup
English - 23
Setting the Date and Time
Your DVD Recorder & VCR contains a 24-hour clock and calendar
used to:
• Automatically stop a programme recording
• Preset your DVD Recorder & VCR to record a programme automatically
• You must set the date and time when you purchase the DVD Recorder
& VCR.
• Do not forget to reset the time when you change clocks from winter to
summer time and vice versa.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the OK or ►
button.
3. Press the ▲▼ buttons to select Clock Set, then press the OK or ►
button.
4. Press the ◄► buttons to select the hour, minutes, day, month and
year.
• The selected item is highlighted.
5. Press the ▲▼ buttons to increase or decrease the value.
• The day of the week is displayed automatically.
• You can hold the ▲▼ buttons down to scroll more quickly through
the values.
Setting the clock Automatically
6. Press the ◄► buttons to select Auto Clock.
Press the ▲▼ buttons to select On.
7. Press the OK button, then the date and time will be saved. If you don’t
press the OK button, it will not be saved.
8. Press the EXIT button to exit the menu.

You must have the aerial connected to set the Auto Clock.
Connecting the RF Cable on page 17.
If you set “Auto Clock” to “On”, the Auto Clock set function is
activated whenever the DVD Recorder & VCR is turned off.
The time is adjusted automatically by making reference to the
time signal from the station.
■
■
Clock Set
DVD-Recorder
No Disc
Programme
Setup
Date Time Auto Clock
MON
JAN 01 2007 12 00 On
MOVE OK RETURN EXIT
01293C-VR350,355-XEB-ENG.indb 2301293C-VR350,355-XEB-ENG.indb 23 2007-03-16 오후 5:14:502007-03-16 오후 5:14:50