Operation Manual

Connecting & Setting Up
English - 18
You will enjoy high quality accurate colour reproduction
images. Component video seperates the picture
element into black and white(Y), blue(P
B
), red(P
R
)
signals to present most clear and clean images.
1. Connect Component video cables between the
COMPONENT VIDEO OUT jacks on the rear of the
DVD Recorder & VCR and COMPONENT VIDEO IN
jacks on the rear of the TV.
2. Connect audio cables between the audio output jacks
on the rear of the DVD Recorder & VCR and AUDIO
IN jacks on the rear of the TV.
• Take care to respect the colour coding of the up and
down channels.
• Press the input selector on your TV remote control
until the Component signal from the DVD Recorder &
VCR appears on your TV screen.
Connecting the Component
Video Cable
You will enjoy high quality images. S-Video seperates
the picture element into black and white(Y) and
colour(C) signals to present clearer images than
composite video output mode.
1. Connect one end of the S-Video cable into the
S-VIDEO output jack on the rear of the DVD Recorder
& VCR.
2. Plug the other end of the S-Video cable into the
appropriate input connector on the television.
3. Connect one end of the audio cable supplied into the
AUDIO output jacks on the rear of the DVD Recorder
& VCR.
• Take care to respect the colour coding of the up and
down channels.
4. Plug the other end of the audio cables into the
appropriate input connectors on the television.
Connecting the S-Video Cable
red
white
white
red
S-Video cable
(not supplied)
COMPONENT INPUT
red
white
red
white
Component
cable
(not supplied)
01293C-VR350,355-XEB-ENG.indb 1801293C-VR350,355-XEB-ENG.indb 18 2007-03-16 오후 5:14:372007-03-16 오후 5:14:37