User Manual

English

- 15

Settings

Tuning Your Television

for the DVD-VCR

To view pictures from your DVD-VCR when a

Audio/Video cable is used, the television must be set

to the audio/video mode (AV).

Switch on the television.

Switch on the DVD-VCR by pressing the

/I STANDBY/ON on the front of the DVD-VCR

or STANDBY/ON on the remote control.

Select a programme position on the television

to be reserved for use with your DVD-VCR.

Insert the video cassette in the DVD-VCR.

Check that the DVD-VCR starts reading the

cassette; if not, press the √II button.

Start a scan on your television or set the

television to UHF channel 36.

Fine tune the television until the pictures and

sound are obtained clearly.

When the picture and sound are perfectly clear,

store this channel at the desired programme

position on the television.

That programme is now reserved for use with

your DVD-VCR.

• Tuning Your Television for the DVD-VCR . . 15

• Setting the Date and Time . . . . . . . . . . . . . . 16

• Setting the Menu Language . . . . . . . . . . . . . 17

• Presetting the Stations Automatically . . . . . 17

• Presetting the Stations Manually . . . . . . . . . 18

• Clearing a Preset Station . . . . . . . . . . . . . . . 20

• Changing the Preset Station Table . . . . . . . . 20

• Selecting the RF OUT Sound Mode (K-I-M) . . . 21

• Setting the VCR Output Channel . . . . . . . . . 22