User Manual

14 - English
Connections
5
Check the date and time.
Refer to “Setting the Date and Time” to change
the date and time. (See page 16).
 Now, you only have to switch the DVD-VCR
on and it is ready for use.
 Function for “Plug & Auto Set Up” is fixed
already. So if you want to change this fixed
one, you can change. (refer to “Presetting
the Stations manually” page 18)
Plug & Auto Setup
Your DVD-VCR will automatically set itself up when it
is plugged into the mains for the first time.
TV stations will be stored in memory. The process
takes a few minutes. Your DVD-VCR will then be
ready for use.
1
Connect the RF Cable as indicated on page 10.
(Connecting Your DVD-VCR to the TV Using
the RF Cable)
2
Plug the DVD-VCR into the mains.
• “AUTO” in the front panel display flickers.
3
The Language Set menu is displayed.
Press the … or † button, move the selection
bar to select the desired language then press
OK button.
4
Start the auto scanning.
The number of stations automatically stored by
the DVD-VCR depends on the number of
stations that it has found.
Note
Auto Setup
RETURN
MENU
Please Wait
10%
√√
SETUP
DVD
VCR
PROG
FUNC
Clock Set
Time Date Year
12 : 00 01 / JAN / 2005 SAT
OK
RETURN
MENU
√ English
Français
Deutsch
Español
Italiano
Nederlands
ê
ì ÒÒÍËÈ
OK RETURN MENU
Language Set