User Manual
English
- 13
Connections
Connecting External
Devices
This allows you to connect your DVD -VCR to other
external devices and view or record their outputs.
• Connecting a VCR, Set-Top Box(STB) or DVD player
to the AUDIO/VIDEO LINE IN 1 jacks.
Connecting a VCR or external device to AUDIO/VIDEO
LINE IN 1 jacks of the DVD-VCR.
You can record from connected equipment (VCR, STB
or DVD).
Copy protected content cannot be recorded.
Note
The DVD-VCR allows you to copy the contents of a
DVD to a VHS tape with a press of the COPY button.
• If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is
not permitted to copy Macrovision® encoded DVDs.
1
Insert the disc you wish to copy in the DVD deck
and close the drawer.
2
Insert a blank VHS videotape into the VCR deck.
3
Press the COPY button on the DVD-VCR front
panel.
•
The DVD will go into Play mode and the VCR
will go into Record mode.
•
If the DVD disc menu appears, you may need to
press the PLAY button manually to begin
copying.
4
When the DVD is finished playing, press the VCR
button on the remote control and then press the
STOP button to end the copy.
•
You must stop the Copy process manually when
the DVD movie ends or the DVD may replay and
record over and over again.
Copying from DVD
to VCR