XEU ENG 1 2/3/07 10:46 AM Page 1 User’s Manual DVD-V6700 www.samsung.
XEU ENG 1 1/29/07 10:48 AM Page 2 Safety Instructions The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE DVD-VCR. Refer to service personnel. DO NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%). DO NOT expose the DVD-VCR to direct sunlight. DO NOT expose the DVD-VCR to any liquids.
XEU ENG 1(01) 2/12/07 4:07 PM Page 3 Disc Type and Characteristics This DVD-VCR is capable of playing the following types of discs with the corresponding logos : Disc Types (Logos) Recording Types Disc Size DVD Audio + Video AUDIO-CD Max. Playing Time Characteristics 12 Cm Single-sided 240 min. Double-sided 480 min. • DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system. 8 Cm Single-sided 80 min. Double-sided 160 min.
XEU ENG 1 11/21/06 2:30 AM Page 4 Contents Getting Started Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . .3 Overviews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Front View of the DVD-VCR (DVD-V6700) . . . . . . . . . . .5 Rear View of the DVD-VCR (DVD-V6700) . . . . . . . . . . . .6 Display Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XEU ENG 1 11/23/06 12:57 AM Page 5 Overviews Front View of the DVD-VCR (DVD-V6700) 1 5 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 6 7 2 8 DVD DECK. OPEN/CLOSE BUTTON. VIDEO CASSETE COMPARTMENT. EJECT BUTTON. STANDBY/ON BUTTON. AUX VIDEO INPUT JACK. AUX AUDIO L/R INPUT JACK. PROGRESSIVE SCAN MODE BUTTON. FRONT PANEL DISPLAY. PROGRAMME SELECTION BUTTON. DVD/VCR SELECTION BUTTON. 3 9 10 12. 13. 14. 15. 16. 17. 4 11 12 13 14 15 16 17 EZ VIEW BUTTON. RECORD BUTTON. REWIND/SKIP BACK BUTTON.
XEU ENG 1 11/21/06 2:30 AM Page 6 Rear View of the DVD-VCR (DVD-V6700) 1 5 1. AUDIO L, R OUT JACKS. 2. AERIAL IN CONNECTOR. 3. AV2 (DEC./EXT.) IN/OUT SCART (EURO-21) JACK. 4. AUDIO L, R OUT JACKS (DVD only). 5. VIDEO OUT JACK. 2 3 4 5 6 1. The DVD Deck is active. 2. Disc is loaded. 3. The time, counter position, current deck status is displayed. 4. VHS tape is inserted. 5. The VCR Deck is active. 6. A Timer Recording is programmed or in progress. 6 - English 3 4 6 7 8 9 10 6.
XEU ENG 1 11/21/06 2:30 AM Page 7 Accessories Tour of the Remote Control Make sure that the following basic accessories are supplied with your DVD-VCR.
XEU ENG 1 11/21/06 2:30 AM Page 8 1. DVD,VCR Used to operate DVD, VCR. 23. PLAY/PAUSE ( ) Used to play or pause during playback. 2. STANDBY/ON Used to turn the power on or off. 24. SEARCH ( / ) Used to search forward or backward through a disc. 3. Number buttons 4. TIMER Used to activate the timer recording of a programme. 5. REC ( ● ) Used to make a recording on cassette. 6. SKIP ( / ) Use to skip a title, chapter or track. 7. STOP ( ■ ) Used to stop during playback. 8.
XEU ENG 2 11/22/06 2:28 AM Page 9 C onnections Connecting DVD-VCR to the TV using the RF Cable To receive television programmes a signal must be received from one of the following sources: • An outdoor aerial. • An indoor aerial. • A cable television network. • A satellite receiver. Note • Make sure that both the television and the DVD-VCR are switched off before connecting the cables. 1 Remove the aerial or network input cable from the television.
XEU ENG 2 11/20/06 12:57 AM Page 10 Connecting DVD-VCR to a Satellite Receiver or Other Equipment Connecting DVD-VCR to the TV using the Audio/Video Cable You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities.
XEU ENG 2 11/22/06 2:28 AM Page 11 Connecting DVD-VCR to the TV using the S-Video Cable (DVD only) You will enjoy high quality images. S-Video seperates the picture element into black and white(Y) and colour(C) signals to present clearer images than regular video input mode. 1 Connect one end of the S-Video cable into the S-VIDEO output jack on the rear of the DVD-VCR. 2 Plug the other end of the S-Video cable into the appropriate input connector on the television.
XEU ENG 2 1/17/07 3:22 PM Page 12 Progressive Scan (DVD only) If the TV connected supports Progressive Scan, press the P.SCAN button on the front panel in stop mode. • The message “Press OK to confirm Progressive scan mode. Otherwise press RETURN.” will be displayed. If you want Progressive scan mode, select OK. Make sure that the disc has stopped completely before changing the mode.
XEU ENG 2 1/17/07 3:22 PM Page 13 Connecting an Audio/Video Input Cable You can connect other audio/video equipment to your DVD-VCR using audio/video cables if the appropriate outputs are available on the equipment chosen. Examples : • You wish to copy a video cassette with the help of a second VCR. • You wish to play and/or copy pictures taken with a camcorder. • Make sure that both the external devices and the DVD-VCR are switched off before connecting the cables.
XEU ENG 2 11/20/06 12:57 AM Page 14 5 The current time and date are displayed automatically. Clock Set SETUP DVD Time Date Year VCR 12 : 00 01 / JAN / 2007 MON Auto Clock : On PROG FUNC Check the Date and Time if it is : • Incorrect, refer to “Setting the Date and Time”. (See page 15) • Correct, press the RETURN button twice to exit the menu. Note • Now, you only have to switch the DVD-VCR on and it is ready for use. • Function for “Plug & Auto Set Up” is fixed already.
XEU ENG 3 11/3/06 2:49 AM Page 15 S ettings Setting the Date and Time You must tune your television for the DVD-VCR only if you are using the RF cable. To view pictures from your DVD-VCR when a Scart cable is used, the television must be set to the audio/video mode (AV). Your DVD-VCR contains a 24-hour clock and calendar used to: • Automatically stop programme recording. • Preset your DVD-VCR to record a programme automatically. You must set the date and time when: • You purchase the DVD-VCR.
XEU ENG 3 11/3/06 10:57 PM Page 16 Setting the Clock Automatically 4 Press the ¥ or button to select Auto Clock. Press the or button to select On. Clock Set SETUP DVD VCR Time Date Year 12 : 00 01 / JAN / 2007 MON Auto Clock : On PROG FUNC OK RETURN MENU Setting the Menu Language 1 Press the MENU button, then press the OK or button.
XEU ENG 3 11/2/06 4:37 AM Page 17 4 Press the OK button to start the auto scanning. The message Please Wait is displayed. Auto Setup Presetting the Stations Manually You do not need to preset the stations manually if you have already set them automatically. 1 Press the MENU button, then press the OK or button. Please Wait 10% Setup SETUP Language DVD RETURN MENU VCR • The first frequency band is scanned and stored, then the DVD-VCR searches for the second station and so on.
XEU ENG 3 11/2/06 ❉ ❉ 4:37 AM Page 18 MANUAL TUNING. ❉ ❉ PR : 1 CH : 021 MFT : NAME : If you have stored a TV station: • That you do not require • At the wrong programme position, you can cancel it. ---- ¥ Clearing a Preset Station MEMORY : OK RETURN 1 Press the MENU button, then press the OK or button. 6 If necessary, press the or button to select MFT, then press the ¥ or button to adjust the picture. Setup SETUP DVD VCR 7 Press the or button to select NAME.
XEU ENG 3 11/2/06 4:37 AM Page 19 Changing the Preset Station Table You can rearrange the station table and give different programme numbers to the stations listed according to your own preferences. 1 Press the MENU button, then press the OK or button. 6 Press the or button to select required position, then press the OK button to swap the position. For example to move a TV station in programme 1 to programme 3.
XEU ENG 3 11/2/06 4:37 AM Page 20 Setting the VCR Output Channel Your DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. 1 Press the MENU button, then press the OK or button. Setup SETUP DVD VCR PROG Language : English Clock Install User Set Auto Power Off : Off Screen Messages : On FUNC OK RETURN MENU 2 Press the or button to select Install, then press the OK or button.
XEU ENG 3 11/22/06 1:11 AM Page 21 V CR F unctions Selecting the Colour Mode Before recording or playing back a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO. • When playing back a cassette, the standard is automatically selected by the DVD-VCR. • When you playback an NTSC-recorded tape on this DVD-VCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB.
XEU ENG 3 11/2/06 4:37 AM Page 22 Intelligent Picture Control Auto Power Off This feature allows you to adjust the sharpness of the image automatically, according to your own preferences. This feature automatically turns off your DVDVCR if no signal is received and you do not press any button for the selected time. 1 During playback, press the MENU button, 1 Press the MENU button, press the OK or then press the OK or button.
XEU ENG 3 11/2/06 4:37 AM Page 23 Selecting the Cassette Type Screen Messages Your DVD-VCR displays most information both If you wish to use the tape counter to display the the DVD-VCR and the television. time remaining on a cassette, you must indicate You can choose to display or hide this information the type of cassette inserted.
XEU ENG 4 11/2/06 4:45 AM Page 24 Selecting the Recording Speed You can record a cassette at two different speeds: • SP (Standard Play) • LP (Long Play) In Long Play modes: • Each cassette lasts twice as long • The recording is of a slightly lower quality 1 Press the SPEED button to select SP or LP. • The selected record speed will appear on the front panel display.
XEU ENG 4 11/2/06 4:45 AM Page 25 Recording a Programme with Automatic Stop Recording from Another VCR or Camcorder This function enables you to record up to nine hours (LP) of programmes.Your DVD-VCR stops automatically after the requested length of time. You can copy a cassette to your DVD-VCR from another video source, such as another VCR or a Camcorder etc.
XEU ENG 4 11/3/06 3:32 AM Page 26 Using the Assemble Edit Function This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change. 1 Insert the cassette to be edited in your DVD-VCR. 2 Press the ll button to start playback. 3 When you reach the position from which you wish to start the new recording, press the ll button.
XEU ENG 4 11/23/06 3:27 AM Page 27 • DLY • W-SU • W-MO : Daily : Weekly Sunday Weekly Monday • W-SA • MO 01 Weekly Saturday : Monday 01 5 Press the button to select Start (Start time 9 When you have finished, press the OK button to set the Timer Programming. 10 Press the MENU button to exit the menu. 11 Press the STANDBY/ON button to activate the timer. of recording).
XEU ENG 4 11/2/06 4:45 AM Page 28 3 To change any values, select the required programme by pressing the or button, then change any values as required. For more details refer to page 26. (Step 2 to 9). • Press the MENU button to exit the menu. Cancelling a Preset Recording You can cancel any programmes that are: • Incorrect • No longer required 1 Press the MENU button, then press the or button to select PROG . The Timer Method menu is displayed.
XEU ENG 4 11/2/06 4:45 AM Page 29 P laying Back Playing a Cassette This function allows you to play any prerecorded cassette. 1 Switch on both the television and your Selecting the Audio Output Mode You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. The following options are available. Press the AUDIO button on the remote control until the required option is displayed. ➝ L ➝ R ➝ MIX ➝ MONO ➝ L R DVD-VCR.
XEU ENG 4 11/2/06 4:45 AM Page 30 Playing a Sequence Frame by Frame You can • Stop the cassette at a given frame (image) • Advance one frame at a time No sound is heard when playing back frame by frame. Searching for a Specific Sequence Each time you record a cassette on this DVDVCR, an “index” is automatically marked on the tape when recording starts. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point.
XEU ENG 4 11/2/06 4:45 AM Page 31 4 When an Index mark is found the DVD-VCR End Search Use this feature when you want to search for a blank position to record a program on a cassette. The VCR will fast forward, searching for a blank position, and then automatically stop at that position. If the VCR reaches the end of the tape during end search, the tape will be ejected. 1 Press the SEARCH button. The VCR Function menu is displayed. Press the or button to select End Search.
XEU ENG 4 11/2/06 4:45 AM Page 32 Using the Tape Counter The tape counter: • Indicates the elapsed time in the play and record modes (Hours, Minutes and Seconds). • Is reset when a cassette is inserted in the DVD-VCR. • Allows you to find the beginning of a sequence easily. • If the remaining time is to be calculated correctly, you must indicate the type of cassette being used. 1 Insert a cassette in your DVD-VCR.
XEU ENG 5 11/2/06 5:41 AM Page 33 D VD F unctions Setting Up the Language Features If you set disc menu, audio and subtitle language in advance, it will come up automatically every time you watch a movie. Using the Disc Menu Language 1 Press the MENU button in the stop mode. Using the Audio Language 1 Press the MENU button in the stop mode. Press the or button to select DVD, then press the OK or button.
XEU ENG 5 11/2/06 5:41 AM Page 34 Using the Subtitle Language 1 Press the MENU button in the stop mode. Press the or button to select DVD, then press the OK or button. Setting Up the Audio Options 1 Press the MENU button in the stop mode. Press the or button to select DVD, then press the OK or button.
XEU ENG 5 11/3/06 3:47 AM Page 35 2 Press the or button to select Display DTS • Off: Doesn’t output digital signal. • On: Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder. Dynamic Compression • On: To select dynamic compression. • Off: To select the standard range. Setup, then press the OK or button.
XEU ENG 5 11/2/06 5:41 AM Page 36 NTSC Disc Output Create Password “NTSC” if the screen only has one NTSC-video entrance. If this is not the case, you can choose to leave “PAL60” as is. Enter Password DVD Out – – – – • RGB: Sends RGB signal from the AV JACK (SCART terminal). • S-Video: Sends S-VIDEO signal from the AV JACK (S-Video terminal). • Video: Sends COMPOSITE VIDEO signal from the AV JACK (SCART terminal). RETURN The Re-enter Password menu is displayed to confirm the password.
XEU ENG 5 11/2/06 5:41 AM Page 37 Rating Level Level 8 Adult DivX(R) Registration Please use your registration code to register this DVD-VCR with the DivX(R) Video On Demand service. This will allow you to rent and purchase videos using the DivX(R) Video On Demand format. To learn more go to www.divx.com/vod. Level 7 Level 6 Level 5 Level 4 Level 3 Level 2 Level 1 Kids Safe OK RETURN MENU 6 Press the or button to select the required level (e.g. Level 6). Press the OK or button.
XEU ENG 5 11/21/06 2:36 AM Page 38 Firmware Upgrade How to make an update disc Please read the below information before update procedure. Write the downloaded file onto a blank CD-R disc, using the following settings. 1 The following events may interrupt the update 1 Download the software update file from the procedure and may result in permanent damage to DVD-VCR. • Unplugging the power cord. • Power outage. • Dirt or Scratch in the discs. • Open a tray door during processing.
XEU ENG 5(01) 2/12/07 4:28 PM Page 39 3 ERASE and WRITE appears in turn at the same location for about 40 sec during firmware update. Special Playback Features During DVD/CD playback you can select from the following special playback options. To resume normal playback, press the ll button. ERASE RETR 00 Still Press the ll button during playback. • The picture will still and the audio will mute. • To resume playback, press the ll button.
XEU ENG 5(01) 2/12/07 4:28 PM Page 40 Stop/Resume • Press the ■ button once to stop playback. To resume the DVD/CD from the point where the disc stopped, press the ll button. • Press the ■ button twice to completely stop playback. The next time you press the ll button, the disc will start over from the beginning. Note • Slow motion operates only in the forward direction. Slow motion is not available for CD.
XEU ENG 5(01) 2/12/07 4:31 PM Page 41 To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. A DVD may contain several different titles. For example, if a disc contains four different movies, each might be considered a title. Most of DVD discs are recorded in chapters so that you can quickly find a specific passage. Each Title on a DVD is usually divided into chapters (similar to tracks on an audio CD).
XEU ENG 5 11/2/06 5:41 AM Page 42 If you are using a 4:3 TV Selecting the Subtitle Language For 16:9 aspect ratio discs - 4:3 Letter Box Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen. - 4:3 Pan Scan The left and right portions of the screen are cut off an the central portion of the 16:9 screen is displayed. - Screen Fit The top and bottom portions of the screen are cut off and a full screen appears.
XEU ENG 6 (01) 2/12/07 6:20 PM Page 43 Selecting the Audio Language Zoom Multiple language/audio setup options, such as Dolby Digital 5.1, Dolby Pro Logic or LPCM 2 Channel audio are available on some DVDs. You can use the AUDIO button to quickly view and select the options available on a disc. 1 During playback, press the MENU button. 1 During playback, press the AUDIO button. DVD Press the or button to select FUNC, then press the OK or button. The Function menu is displayed.
XEU ENG 6 (01) 2/12/07 6:20 PM Page 44 Marks Repeat Chapter/Title Up to three Bookmarks can be inserted for a given DVD, allowing you to quickly jump to your favorite scene or song. You can repeat a single chapter or a complete title. 1 During playback, press the MARK button. 1 Press the REPEAT button while in playback mode to open the repeat menu. The current repeat mode is displayed. 2 Press the ¥ or button to select Chapter/Title. Press the OK button to repeat the current chapter/Title.
XEU ENG 6 (01) 2/12/07 6:20 PM Page 45 A to B Repeat A to B Repeat feature enables you to repeat the designated section on a DVD or CD. To activate, mark where to start (A) and where to end (B) of the section you want to watch. 1 Press the REPEAT button while in playback mode, then press the ¥ or button to select A-. Cancel A-B Repeat 1 Press the REPEAT button to open the repeat menu. 2 Press the ¥ or button to selected Off, then press the OK button.
XEU ENG 6 9/25/06 2:58 AM Page 46 MP3/WMA Play CD-R MP3/WMA discs If you insert an MP3/WMA Disc into the DVD-VCR, you can see the folder directory. When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R above, plus the comments below: Your MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac. These two formats are the most widely used.
XEU ENG 6 9/25/06 2:58 AM Page 47 Program & Random Play/ (CD/MP3/WMA) RANDOM PROGRAM You can listen to songs randomly or in the desired sequence. Program Play Press the ¥ or button to select PROGRAM. Press the OK button. PROGRAM RANDOM RETURN OK 2 Press the /,¥/ buttons to select the first track to add to the program. Press the OK button. The selection numbers are displayed in the Program Order box.
XEU ENG 6 9/25/06 2:58 AM Page 48 Note • If no buttons on the remote control are pressed for 10 seconds, the menu bar will disappear. Press the DISC MENU button on the remote control to display the menu bar. Slide show Press the ¥ or button to select . Press the OK button. The 3 icons are displayed for time interval. Photo : 1/215 Album Mode OK Press the ¥ or button to select Press the OK button. The album mode is displayed. Album RETURN .
XEU ENG 6 11/21/06 2:19 AM Page 49 DivX/MPEG4 Playback 1 When the disc is inserted, the file structure of the disc will be shown. Depending on the file format, a different icon will appear next to each file. The and files will have been highlighted. Use or button to select the movie file, and then press OK or ll. Result : When the 'Reading Index......' message is displayed, wait for a second or two. The movie will be played back.
XEU ENG 6 11/21/06 2:19 AM Page 50 6 Zoom During play, press the MENU button on the remote control. Then press the or button to select the FUNC , then press the OK or button. The Function menu is displayed. Function SETUP DVD DVD Function VCR Function VCR PROG FUNC OK RETURN MENU • Press the or button to select DVD Function. Press the OK or button. • Press the or button to select ZOOM, then press the OK button.
XEU ENG 7(01) 2/12/07 6:22 PM Page 51 Technical Specifications General Rated voltage AC 220 - 240V, 50Hz Power consumption 19Watts Weight 3.9 Kg Size 430mm X 282mm X 82mm Operating ambient temperature +5°C ~ +40°C Installation conditions Operation position : Horizontal, Video input (Rear) Euro Scart socket : 1.
XEU ENG 7 9/25/06 2:45 AM Page 52 Troubleshooting Guide (VCR) Before contacting the Samsung after-sales service, perform the following simple checks. If you are unable to solve the problem after reading the below instructions, note: • The model and serial number on the rear of your DVD-VCR. • The warranty information. • A clear description of the problem. Then contact your nearest SAMSUNG after-sales service. Problem Solution No power ◆ Check that the power plug is connected to a wall outlet.
XEU ENG 7 9/25/06 2:45 AM Page 53 Troubleshooting Guide (DVD) Problem Disc does not play. Solution Page ◆ Ensure that the disc is installed with the label side facing up. ◆ Check the region number of the DVD. ◆ This DVD-VCR cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, or a CD. P3 ◆ 5.1 channel sound is reproduced only when the following conditions are met.: 1) The DVD-VCR is connected with the proper amplifier. 5.1 channel sound is not 2) The disc is recorded with 5.1 channel sound.
XEU ENG 7 12/13/06 8:35 AM Page 54 UNITED KINGDOM This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned.
XEU ENG 7 1/29/07 10:36 AM Page 55 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Region North America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL Latin America CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
XEU ENG 7(01) 2/12/07 6:24 PM Page 56 Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. ☎ 0870 242 0303 / www.samsung.
