DVD-HR770 DVD user manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
getting started WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.
PRECAUTION Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
getting started Maintenance of Cabinet For safety reasons, be sure to disconnect the AC power cord from the AC outlet. • Do not use benzene, thinner, or other solvents for cleaning. • Wipe the cabinet with a soft cloth. HDD (Hard Disk Drive) The hard disk has a high storage density, which enables long recording durations and quick access to written data. However, it can easily be damaged by shock, vibration or dust and should be kept away from magnets.
• If you move your HDD & DVD RECORDER suddenly from a cold place to a warm place, condensation may generate on the operating parts and lens and cause abnormal disc playback. If this occurs, do not connect the plug to the power outlet and wait for two hours. Then insert the disc and try to play back again. Disc Specifications This unit allows you to record and playback high quality digital video on DVD-RAM/-RW/-R discs or on the HDD. You can also edit digital images on DVD-RAM/-RW discs or HDD.
getting started • If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format. Be careful when executing Format because all the recorded data may be lost. • A DVD-RW blank disc is initialized to VR Mode when first initialized. ❖ DVD-RAM Disc Playback and Recording • Ensure that the recording mode is set to VR mode. Otherwise, this product will not be able to play the recording. • You cannot play a DVD-RAM in most DVD components due to compatibility issues.
Protection Disc Format ❖ Using MP3 disc • CD-R/-RW, DVD-RAM/±RW/±R, HDD with MP3 files recorded with UDF, ISO9660 or JOLIET format can be playbacked. • Only MP3 files with the “.mp3” or “.MP3” extension can be played. • For MP3 files recorded with a VBR(Variable Bit Rates), from 32 Kbps to 320 Kbps, the sound may cut in and out. • Playable bit-rate range is from 56 Kbps to 320 Kbps. • Each folder can have up to 500 items including files and sub folders.
contents GETTING STARTED 2 CONNECTING & SETTING UP 20 2 3 10 11 12 14 16 19 Warning Precaution General Features Before reading the user’s manual How to use the HDD & DVD RECORDER Unpacking Description Tour of the Remote Control 20 21 22 27 Connecting the HDD & DVD RECORDER Additional connections Antenna + HDD & DVD RECORDER + External decoder box + TV Other type of connecting the Video output cable Other type of connecting the Audio output cable Connecting to AV 3 IN jackS 28 28 30 30 32 32 34 35 37
RECORDING 59 73 REFERENCE Recordable Discs Recording Formats Recording Mode Unrecordable pictures Recording immediately Making a One Touch Recording (OTR) Simultaneous Recording and Playback Time Shift function as a live signal Making a Timer Recording Using the ShowView Feature ShowView Extended Go To Recorded List 73 77 78 79 79 84 85 87 88 Basic Editing (Title List) Using the Sort function (Title List) Navigation Menu Select Contents Advanced Editing (Playlist) Copying from HDD to DVD or vice-versa
getting started GENERAL FEATURES This unit allows you to record and playback high quality digital video on DVD-RAM/-RW/-R discs or on the HDD. You can also edit digital images on DVD-RAM/-RW discs or HDD. HDD Recording • DVD-HR770 You can record up to Approx. 264 hours of video (in EP mode (8 Hours)) on the internal 160GB (gigabyte) hard disk (HDD).
BEFORE READING THE USER’S MANUAL Make sure to check the following terms before reading the user manual. Icons that will be used in manual Icon Definition HDD This involves a function available on the HDD. DVD This involves a function available on DVD or DVD±R/-RW(V) discs that have been finalised. RAM This involves a function available on DVD-RAM. -RW This involves a function available on DVD-RW. -R +RW +R This involves a function available on DVD-R. This involves a function available on DVD+RW.
getting started HOW TO USE THE HDD & DVD RECORDER Step 1: Select the disc type or HDD Please check available disc type before recording. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD-RW or DVD-RAM type disc. If you want to save a recording without any changes, choose a non-rewritable DVD-R. You can record files directly to the built-in HDD or edit a recorded file.
Step 3 : Recording There are two different recording methods, Direct Recording and Timer Recording. Timer recording is classified as follows: Recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode) according to the recording mode. When recording is set in the FR mode, the best quality picture is recorded with regards to the remaining time on the disc. Step 4 : Playing A DVD consists of sections, called titles, and sub- sections, called chapters.
getting started UNPACKING Accessories Check for the supplied accessories below. Video/Audio Cable RF Cable for TV Remote Control Batteries for Remote Control (AAA Size) Instruction Manual Quick Guide Preparing the Remote Control Install Batteries in the Remote Control • Open the battery cover on the back of the remote control. • Insert two AAA batteries. Make sure that the polarities (+ and –) are aligned correctly. • Replace the battery cover.
Controllable TV Codes BRAND BUTTON SAMSUNG 01, 02, 03, 04, 05, 06, 07, 08, 09 BRAND NOBLEX NOKIA BUTTON 66 82 10, 11, 12, 13, 14, 15, 16, 17, 18 NORDMENDE 72, 73, 75 BANG & OLUFSEN 57 PANASONIC 53, 54, 74, 75 BLAUPUNKT 71 PHILIPS 06, 55, 56, 57 BRANDT 73 PHONOLA 06, 56, 57 BRIONVEGA 57 PIONEER 58, 59, 73, 74 CGE 52 RADIOLA 06, 56 CONTINENTAL EDISON 75 RADIOMARELLI DAEWOO 19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 RCA EMERSON 64 REX FERGUSON 73 SABA 74 57
getting started DESCRIPTION Front Panel 1 2 8 10 7 6 5 9 OPEN/CLOSE button Opens and closes the disc tray. DISPLAY Displays the playing status, time, etc. HDD/DVD button Selects HDD/DVD mode. REC button Starts recording. SEARCH/SKIP buttons Goes to the next title/chapter/track or goes back to the previous title/chapter/track. (Playback mode) Select TV preset Channels. (Stop mode) 10 3 4 PLAY/PAUSE button Plays a disc or pauses playback. STOP button Stops disc playback.
Rear Panel Fan 1 3 2 4 GETTING STARTED The fan always revolves when the power is on. Ensure a minimum of 10 cm clear space on all sides of the fan when installing the product. 5 6 7 8 1 In from aerial connector Connects RF cable from antenna. 2 Out to TV connector Connects RF cable to TV antenna input. 3 AV2(EXT) INPUT SCART connector Connects to equipment having SCART output jack. 4 AV1(TV) OUTPUT SCART connector Connects to equipment having SCART input jack.
getting started Front Panel Display 1 2 3 7 6 In Disc Indicator Lights status icon. REC Indicator Lights in the record mode. DVD VIEW Indicator Lights when DVD mode is selected. TIMER Indicator Lights to indicate the timer record mode. PS Lights in the progressive scan mode. Indicator 5 STATUS Indicator Playing time/clock/current status indicator. Disc Media Indicator Lights when a DVD-RAM/-RW/-R disc is loaded.
TOUR OF THE REMOTE CONTROL Your HDD & DVD RECORDER remote control will work with Samsung televisions and compatible brands. Installing batteries in the Remote Control 2. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Assuming typical TV usage, the batteries last for about one year. SELECT (DVD, HDD) TV button Press this to operate TV. STANDBY/ON button Press to turn the HDD & DVD RECORDER On/Off.
connecting & setting up CONNECTING THE HDD & DVD RECORDER This section involves various methods of connecting the HDD & DVD RECORDER to other external components and required initial setting modes. You can connect your HDD & DVD RECORDER to the television using the SCART cable if the appropriate input is available on the television. 1. Connect the RF cable as shown. 2. Connect one end of the SCART cable to the AV1 socket on the rear of the HDD & DVD RECORDER. 3.
ADDITIONAL CONNECTIONS You can connect your HDD & DVD RECORDER to a satellite or digital tuner. CONNECTING & SETTING UP External device (VCR/Satellite receiver) - DVD mode 1. Connect the AV2 connector of HDD & DVD RECORDER and VCR/Satellite receiver or digital tuner using a SCART cable. 2. Connect the AV1 connector to the SCART AV connector on TV. 3. Turn on the HDD & DVD RECORDER, VCR/Satellite receiver or digital tuner and TV. 4. Set Input mode on AV2. - TV mode 1.
connecting & setting up ANTENNA + HDD & DVD RECORDER + EXTERNAL DECODER BOX + TV If you connect external decoder box to HDD & DVD RECORDER, you can record scrambled channels (CANAL+ or Premiere broadcasts) received through the built-in TV tuner in HDD & DVD RECORDER. Wall 3 DECODER 1. Connect RF antenna cables as shown. 2. Connect the AV1 connector on this recorder to the SCART AV connector on TV using a SCART cable. 3. Connect the AV2 connector to a SCART AV connector on decoder box. 4.
OTHER TYPE OF CONNECTING THE VIDEO OUTPUT CABLE There are several ways to output a video signal not using scart cables. Select one of the following video connections that best suits. • Case 1 : Connecting to a Video (Composite) output jack • Case 2 : Component Video output jacks Case 1 : Connecting to a Video (Composite) output jack 1. Connect a video (Yellow) cable between the VIDEO (yellow) OUT jack on HDD & DVD RECORDER and VIDEO (yellow) INPUT jack on your TV (or AV amplifier).
connecting & setting up Case 2 : Component Video output jacks 1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y, PB, PR) jacks on HDD & DVD RECORDER and COMPONENT IN(Y, PB, PR) jacks on your TV. • You will enjoy high quality and accurate colour reproduction images. 2. Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD RECORDER and AUDIO IN jacks on TV (or AV amplifier). (See pages 25~26). 3. After connecting, refer to the page 36.
OTHER TYPE OF CONNECTING THE AUDIO OUTPUT CABLE Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved. Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
connecting & setting up Case 2 : Connecting to a stereo amplifier with AV output jacks If your stereo amplifier only has AUDIO INPUT jacks (L and R), use the AUDIO OUT jacks Red White Front(L) speaker Front(R) speaker Case 3: Connecting to an AV amplifier with a digital output jack If your AV amplifier has a Dolby Digital, MPEG2 or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital, MPEG2 or DTS sound, you will need to set up the audio settings.
CONNECTING TO AV 3 IN JACKS This allows you to connect your HDD & DVD RECORDER to other external devices and view or record their outputs. • Connecting a VCR, Set-Top Box(STB), DVD player or Camcorder to the AV 3 IN jacks Connecting a VCR or external device to AV 3 IN jacks of the HDD & DVD RECORDER. You can record from connected equipment (VCR, STB, DVD player or Camcorder). Camcorder VCR STB DVD Yellow M Red White AV 3 in selection will be automatically done.
system setup ON-SCREEN MENU NAVIGATION The on-screen menus allow you to enable or disable various functions on your HDD & DVD RECORDER. Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on screen menus. 1. ▲▼, ◄► buttons Press these buttons on the remote control to move the selection bar ▲▼, ◄► to cycle through the menu options. 2. OK button Press this button on the remote control to confirm any new settings.
6. Auto channel scan will be started. • The number of stations automatically stored by the HDD & DVD RECORDER depends on the number of stations that it has found. 7. After auto channel scan is completed, auto clock setting will be started automatically in 10 seconds. If you want to start auto clock setting immediately, press OK button. Auto channel scan completed successfully. Press the [OK] button to auto clock set. OK 8. Wait until current date and time are displayed automatically.
system setup SETTING THE CLOCK This menu is used to set the current time. You need to set the time to use timer recording. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select System, then press the OK or ► button. 4. Press the ▲▼ buttons to select Clock Set, then press the OK or ► button. Press the ▲▼◄► buttons to input Month, Day, Year, Hour or Minute.
4. Press the ▲▼ buttons to select Auto Setup, then press the OK or ► button. The message “Your data will be lost. Press [OK] to continue, [RETURN] to exit.” is displayed. 5. Press the OK button, then press the ▲▼◄► buttons to select your Country. • The HDD & DVD RECORDER searches for the stations according to a preset preference list corresponding to the country that you have selected. (See page 28) 6. Press the OK button. Channel scan will be started.
system setup SETTING UP THE LANGUAGE OPTIONS If you set the language options, in advance, they will come up automatically every time you watch a movie. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. HDD & DVD RECORDER HDD Library Timer Record 3. Press the ▲▼ buttons to select Language, then press the OK or ► button. Language setup menu will be displayed. 4.
Auto Power Off Setting This feature automatically turns off your HDD & DVD RECORDER, if you do not press any button for the selected time. 1. Press the ▲▼ buttons to select Auto Power Off, then press the OK or ► button. HDD & DVD RECORDER HDD Library System | Clock Set DivX(R) Registration Please use the Registration code to register this HDD & DVD RECORDER with the DivX(R) Video On Demand format. For more information, visit www.divx.
system setup SETTING UP THE AUDIO OPTIONS You can connect the HDD & DVD RECORDER to an external amp or Home theatre. Allows you to setup the Audio device and sound status depending on the audio system in use. You can also set NICAM mode. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select Audio, then press the OK or ► button. 4.
DRC HDD & DVD RECORDER HDD Library Timer Record Audio Digital Output DTS DRC Disc Manager Off On NICAM : PCM | : Off | : On | : On | Setup mMOVE sSELECT rRETURN eEXIT NICAM NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.
system setup 3D Noise Reduction (motion adaptive noise reduction) • Off : Normal • On : Provides a clear picture through noise reduction (for recording). HDD & DVD RECORDER HDD Library Timer Record Video TV Aspect 3D Noise ReductionOff On Video Output Disc Manager Component Output : 16:9 Wide | : Off | : Component | : Interlace | Setup mMOVE sSELECT rRETURN eEXIT Video Output You can enjoy high quality image through RGB or Component video connections.
SETTING UP THE PARENTAL LOCK Z The Parental Lock function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select Parental Lock, then press the OK or ► button. When you operate your HDD & DVD RECORDER for the first time, the “Create the Password” message will be displayed.
system setup SETTING UP THE RECORDING OPTIONS Automatic Chapter Creator CV (V-mode) A DVD-Video consists of ‘Titles’ and ‘Chapters’. When you record one programme, it makes one Title. If you use this function, the Title will be divided into Chapters. 1. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 2. Press the ▲▼ buttons to select Recording, then press the OK or ► button. HDD & DVD RECORDER DVD-RW(V) Library Timer Record Disc Manager 3.
EZ Record CV (V-mode) This function allows you to Initialise and Finalise a disc automatically. 2. Press the ▲▼ buttons to select On, then press the OK or ► button. Press the EXIT ( ) button to exit the menu. 3. Insert a disc. If the disc is new, it will initialise automatically. HDD & DVD RECORDER HDD Library Timer Record Disc Manager Recording Chapter Creator : Off | EP Mode Time : 6 Hours | EZ Record : Off | : Off | Off On V-Mode Compatibility Setup mMOVE sSELECT rRETURN eEXIT 4.
playback This section introduces basic functions of playback and playback by disc type. Read the following information before playing a disc. REGION CODE (DVD-VIDEO ONLY) Both the HDD & DVD RECORDER and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this HDD & DVD RECORDER is described on the rear panel of the HDD & DVD RECORDER.
Disc Types Disc Logo content Recorded content Disc Shape Max. Playing Time Single Layer(12cm) 2 hrs. (SP: Standard Quality) (4.7GB) 4 hrs. (LP: Long Playback) 1 hr. (XP: Excellent Quality) 6 or 8 hrs. (EP: Extended) VIDEO 2 hr. (XP: Excellent Quality) Dual Layer(12cm) (9.4GB) 4 hrs. (SP: Standard Quality) 8 hrs. (LP: Long Playback) 12 or 16 hrs. (EP: Extended) 1 hr. (XP: Excellent Quality) DVD-RW AUDIO VIDEO 12cm (4.7GB) 2 hrs. (SP: Standard Quality) 4 hrs. (LP: Long Playback) 6 or 8 hrs.
playback Discs that cannot be played • • • • DVD-Video with a region number other than “2” or “ALL” 3.9 GB DVD-R Disc for Authoring. DVD-RAM/-RW(VR mode) not recorded following the Video Recording Standard A DVD±R/DVD-RW(V) disc which has been recorded and not finalised in a different manufacturer’s recorder. • DVD-ROM/PD/MV-Disc, etc • CVD/CD-ROM/CDV/CD-G/CD-I M This HDD & DVD RECORDER can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.
USING THE DISC MENU & TITLE MENU Some type of discs contain a dedicated menu system that allows you to select special functions for title, chapter, audio track, subtitle, film preview, information on characters, etc. For DVD-VIDEO Disc For HDD/DVD-RAM/-RW/-R Disc SXCV • Title List Press the TITLE LIST button. Title List is a list of previously recorded programmes. If a title is deleted, that title cannot be played again. • Play List (HDD/DVD-RAM/-RW(VR)) Press the PLAY LIST button.
playback Skipping Chapters, Titles or Markers SZXCVo During play, press the SKIP ( ) buttons on the remote control. • If you press the SKIP ( ) button, it moves to the beginning of the chapter or Title or marker (HDD/DVD-RAM/-RW(VR mode)). Pressing the button once again within 3 seconds returns to the beginning of the previous chapter or Title or marker (HDD/DVD-RAM/-RW(VR mode)). • If you press the SKIP ( ) button, it moves to the next chapter or track or marker (HDD/DVD-RAM/-RW(VR mode)).
USING THE INFO BUTTON The INFO function allows you to easily search for a desired scene by accessing title, chapter, or time. You can also change the subtitle and audio settings and set some features including Angle, Repeat, and Zoom. Moving to a scene directly using the INFO 1. Press the INFO button during playback. 2. Press the ▲▼ buttons to select Search, then press the OK or ► button. 3. Press the ▲▼ buttons to select Title, Chapter or Time. 4.
playback SELECTING THE SOUNDTRACKS & AUDIO CHANNELS SZXCD Selects one of the soundtracks recorded on the disc. Also selects the audio channels from recorded TV programmes. You can also operate this function by pressing the AUDIO button on the remote control. 1. Press the INFO button during playback. 2. Press the ▲▼ buttons to select Audio. 3. Press the ◄► buttons to select the desired soundtracks or audio channel. M Soundtracks or Audio channel may be different because they are disc-specific.
Repeat A-B SZXCV 1. Press the INFO button during playback. A-B > Repeat PLAYBACK 2. Press the ▲▼ buttons to select Repeat. 3. Press the ◄► buttons to select A-B, then press the OK button. 4. Press the OK button at the point where you want the repeat play to start (A) and press it again at the point where you want the repeat play to stop (B). Repeat playback of the A-B section starts.
playback USING MARKERS SXC (VR mode) Set marks at scenes you want to see again so that you can start playback from the marked position. Setting Markers 1. Press the MARKER button during playback. Marker 01 02 -- -- -- -- -- -- -- -- N:2 2. Press the OK button when the desired scene appears. • The number 01 is displayed and the scene is memorized. 3. Press the ► button to move to the next position. 4. Press the OK button again when the desired scene appears.
USING THE BOOKMARKS ZCV (V mode) Setting Bookmarks Bookmark 2. Press the OK button when the desired scene appears. • The number 1 is displayed and the scene is memorized. 1 2 - - - - - - - -- 3. Press the ► button to move to the next position. 4. Press the OK button again when the desired scene appears. The number 2 is displayed and the scene is memorized. • Repeat above to bookmark other positions. • You can bookmark up to 10 scenes.
playback PLAYING AN AUDIO CD/MP3 Buttons on the Remote Control used for Audio CD(CD-DA)/MP3 playback 1 4 1 2 3 2 5 5 9 6 10 11 7 8 1 SKIP ( page. ) button : Moves to the previous or next 2 Press the SEARCH ( ) buttons : Fast Play (X 2, X 4, X 8) (Audio CD only) 3 STOP ( 4 PAUSE ( 5 PLAY ( 6 ▲▼ : Selects a track (song). 7 RED(A) button : • Creates a playlist or go to playlist. • Select All : MP3, CD-DA • Copy : MP3 • CD Import : Audio CD 8 GREEN(B) button : Selects the sort order.
Playing an MP3 Disc 1. Insert an MP3 disc into the disc tray. • The menu is displayed 2. Press the buttons to select Library, then press the OK or ► button. 3. Press the buttons to select Music, then press the OK or ► button. PLAYBACK 4. Press the buttons to select the track you want to hear, and then press the OK button. MP3 Screen Elements ➀ CD Q Song 1.mp3 Music List 1/9 No. Title Size Y ROOT ➁ ➂ ➃ ► 00:02:22 9 Song 1.mp3 E ROOT Edit Sort #/$ PREVIOUS/NEXT PAGE Q Song 1.mp3 3.
playback CD Import o 1. Press the RED(A) button during the Music List playback. 2. Press the buttons to select CD Import, then press the OK or ► button. 3. Press the ▲▼ buttons to select file you want to copy, then press the MARKER button until a checkmark appears. • If you don’t want to copy a certain one of the checked entries, simply select that entry and press MARKER button to deselect it until a checkmark disappears. 4. Press the ►▲▼ buttons to select the target media,then press the OK button.
Go To Playlist oA 1. Press the RED(A) button during the Music List playback. Playlist q U No. Title Length Y PLAYLIST PLAYBACK 2. Press the ▲▼ buttons to select Go To Playlist, then press the OK or ► button. CD E PLAYLIST01 3. Press the ▲▼ buttons to select the desired playlist folder, then press the OK button. The selected tracks are played automatically. ► 00:02:22 Y PLAYLIST mMOVE sSELECT a CHECK eEXIT Delete the Playlist oA 1.
playback Go To Music List oA 1. Press the BLUE(D) button during the Playlist playback. The Music List will be displayed. CD Q TRACK04 Playlist 1/4 U No. Title Y Length PLAYLIST01 R TRACK04 4:03 002 TRACK02 3:57 ► 00:02:22 003 TRACK06 5:08 I TRACK04 k PLAYLIST01 004 TRACK01 4:19 Edit Playlist New Playlist Music List eEXIT Using the Sort A When you need to change the Sort order of Music List, you can change it simply. 1.
VIEWING A PICTURE G 1. Insert a JPEG disc into the disc tray. • The menu is displayed 3. Press the ▲▼ buttons to select Photo, then press the OK or ► button. • To see the next 8 pictures, press the SKIP ( ) button. • To see the previous 8 pictures, press the SKIP( ) button. Photo List 1/17 ROOT Image 1.jpg Image 10.jpg Image 11.jpg Image 13.jpg Image 14.jpg Image 15.jpg Image 16.jpg Edit Sort #/$ PREVIOUS/NEXT PAGE Slideshow a CHECK Contents eEXIT 4.
playback Zoom To setup, follow steps 1 to 4 in page 55. 5-1. Press the YELLOW(C) button to select Zoom. 6. Each time the OK button is pressed, the picture is enlarged up to 4x (four times the normal size). ➞ X2 ➞ X4 ➞ X2 ➞ Normal • You can go to Photo List by pressing YELLOW(C) button. ❖ To stop the Zoom Press the GREEN(B), STOP ( ) or RETURN button. Go To Photo List To setup, follow steps 1 to 4 in page 55. 5-1. Press the RETURN button to go to Photo List.
PLAYING A DIVX N Using the MENU button CD Movie_01.avi DivX List 1/1 No. 2. Press the ▲▼ buttons to select Library, then press the OK or ► button. 3. Press the ▲▼ buttons to select DivX, then press the OK or ► button. 4. Press the ▲▼ buttons to select the avi file (DivX), then press the OK or PLAY ( ) button. Title Size Y ROOT 001 Movie_01.avi 162.8MB 3 DivX E ROOT Edit Sort Subtitle Enc. Contents a CHECK eEXIT 5. When DivX file is played, you can use following functions.
playback Western Afrikaans, Basque, Catalan, Danish, Dutch, English, Faeroese, Finnish, French, German, Icelandic, Indonesian, Italian, Malay, Norwegian, Portuguese, Spanish, Swahili, Swedish Central English, Albanian, Croatian, Czech, Hungarian, Polish, Romanian, Serbian(Latin), Slovak, Slovenian Greek English, Greek Cyrillic English, Azeri, Belarusian, Bulgarian, Kazakh, Macedonian, Russian, Serbian, Tatar, Ukrainian, Uzbek M If the subtitle language is displayed in broken fonts, change DivX Su
recording This section shows various HDD & DVD Recording methods. This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. This HDD & DVD RECORDER can record on the following discs. HDD DVD-RAM DVD-RW DVD-R • DVD-RAMs and DVD-RWs are rewritable. • DVD-Rs are non-rewritable.
recording M Finalise - This closes the DVD-RW/-R so no additional recording can be done. Unfinalise - This allows additional recording on a DVD-RW disc originally recorded on the HDD & DVD RECORDER. - A DVD-RW disc that has been recorded by DAO(Disc At Once) in a PC cannot be unfinalised. - A DVD-RW disc that has been recorded in Video Mode of a different maker’s recorder cannot be unfinalised. - A DVD-R disc cannot be unfinalised.
RECORDING MODE • DVD-HR770 Recording Mode Recording Times HDD (160GB) DVD-RAM/-RW/-R XP (high quality mode) Approx. 33 hours Approx. 1 hour about 8.5 Mbps SP (standard quality mode) Approx. 67 hours Approx. 2 hours about 4.5 Mbps LP (long recording mode) Approx. 133 hours Approx. 4 hours about 2 Mbps Approx. 199 hours Approx. 6 hours/ about 1.6 Mbps Approx. 264 hours Approx. 8 hours/ about 1.2 Mbps Approx. 33 hours ~ 264 hours Approx.
recording UNRECORDABLE PICTURES Video with copy protection cannot be recorded on this HDD & DVD RECORDER. When the HDD & DVD RECORDER receives a copy- guard signal while recording, recording stops and the following message appears on the screen. Concerning Copy Control Signals TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy-Once and Copy-Never. If you want to record a copy-once type programme, use DVD-RW with CPRM in VR Mode, DVD-RAM, HDD.
RECORDING IMMEDIATELY SXCV Before you start 1. Check that the disc has enough available space for the recording. Recording the current TV programme you are watching ) or number buttons to select the current 1. Press the PROG ( programme you want to record. Record Mode SP(35:12) 2. Press the REC MODE button repeatedly, (or press the REC MODE button and then press the ▲▼ buttons) to select the recording speed(quality). ➞ SP ➞ LP ➞ EP ➞ XP 3. Press the REC button.
recording To pause recording • Press the REC PAUSE button to pause a recording in progress. • Press the REC PAUSE button again during pause to resume recording. • You can switch channels by pressing the PROG ( ) buttons while recording pauses. To stop recording Press the STOP ( ) button to stop or finish a recording in progress. • When using DVD-RAM/-RW/-R discs, the message “Updating the information of disc. Please wait for a moment” is displayed.
SIMULTANEOUS RECORDING AND PLAYBACK S You can play back from the beginning of the programme you are currently recording. You can watch the previous title list while recording a programme. RECORDING Using the PLAY ( ) button 1. With the unit in recording mode, press the PLAY ( ) button. It plays back the title that you are currently recording from the beginning. Playback is not available for 10 seconds from the start of recording.
recording TIME SHIFT FUNCTION AS A LIVE SIGNAL S This function replays recordings as a live signal. If you are interrupted while watching a TV programme, simply press the TIME SHIFT button, and the HDD & DVD RECORDER immediately starts recording the programme. Time Shift >CHANGE On sSELECT Using the Time Shift function 1. Press the TIME SHIFT button on the remote control. The Time Shift menu is displayed. 2. Press the ▲▼ button to select On, then press the OK button. 3.
MAKING A TIMER RECORDING SXCV 1. Check if the antenna cable is connected. 2. Check the remaining time of the disc. RECORDING 3. Check if the date and time are correct. Make sure the Clock (Setup-Clock Set) is set before you proceed with a timer recording. (See page 30) N Using the TIMER button 1. With the unit in Stop mode, press the TIMER button. 2. Press the ▲▼ buttons to select the Scheduled List, then press the OK or ► button. HDD & DVD RECORDER HDD Library Timer Record 3.
recording - Set up the start-time EXACTLY according to the published TV schedule. Otherwise the timer recording will not operate. - Do not select PDC or VPS unless you are sure the programme you wish to record is broadcast with PDC or VPS. • TITLE : To label the title name, press the RED(A) button. Title renaming screen appears. Follow steps 4 and 5 of “Renaming (Labelling) a Title” on pages 73~74. 5. After selecting the set up value for each mode, press the OK button to select Save.
Adding a Scheduled List Follow these directions to add an entry from the Scheduled List To setup, follow steps 1 to 2 in “Making a Timer Recording” on page 67. 4. Press the OK button to confirm the added setting. 5. Press the EXIT ( ) button after finishing the operation. The Scheduled List screen will disappear. Deleting a Scheduled List SXCV Follow these directions to delete an entry from the Scheduled List. To setup, follow steps 1 to 2 in “Making a Timer Recording” on page 67. 3.
recording USING THE SHOWVIEW FEATURE SXCV Before setting your HDD & DVD Recorder to record. • Switch on both the television and your HDD & DVD RECORDER. • Check that the date and time are correct. Up to twelve programmes can be set to record. 1. With the unit in Stop mode, press the TIMER button. 2. Press the ▲▼ buttons to select ShowView, then press the OK or ► button. • A message is displayed to allow you to enter the ShowView code. 3.
SHOWVIEW EXTENDED To prevent delays or overruns, the HDD & DVD Recorder has a function called ShowView Extended allowing you to extend the recording time by up to 60 minutes. • Only use if PDC is not available or set to OFF. HDD & DVD RECORDER HDD Library Timer Record Timer Record | ShowView Scheduled List ShowView Extended Disc Manager Recorded List 1. With the unit in Stop mode, press the TIMER button. 2. Press the ▲▼ buttons to select ShowView Extended, then press the OK or ► button.
recording Clear Recorded List Clears all Recorded List at once. 3-1. Press the GREEN(B) button. HDD 4. Press the ◄► buttons to select Yes, then press the OK button. No.
editing BASIC EDITING (TITLE LIST) Playing the Title SXCV Follow these instructions to play back a scene from the Title List. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. 2. Press the ▲▼ buttons to select an entry you want to play from Title List, then press the OK or PLAY ( ) button. The selected entry (title) will be played back. HDD JAN/01/2008 17:30 PR1 Title List 1/3 No.
editing 5. Press the BLUE(D) button to select Save. The changed title name is displayed on the title item of the selected entry. HDD Rename Sports (A1 ) Back Space mMOVE Space sSELECT Clear rRETURN Save eEXIT Locking (Protecting) a Title SXCV Follow these instructions to lock an entry to protect it from accidental editing. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. HDD JAN/02/2008 21:00 PR1 Title List 2/3 No. 2.
Deleting a Title SXCV Follow these instructions to delete an entry from the Title List. 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. 2. Press the ▲▼ buttons to select an entry you want to delete in the Title List, then press the MARKER button until a checkmark appears. Repeat this step to select an additional title you want to delete.
editing Splitting a Section of a Title (Split) S Follow these instructions to split a section of a Title List entry into two titles. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. 2. Press the ▲▼ buttons to select an entry you want to Split from the Title List, then press the RED(A) button. The Edit menu is displayed. 3. Press the ▲▼ buttons to select Split, then press the OK or ► button.
5. Press the OK button at the end point. The image and end point time is displayed in the Section deletion ending point window. HDD JAN/01/2008 17:30 PR1 Start End 00:19:10 00:41:20 00:41:20 End Delete ► Play Pause
editing NAVIGATION MENU Time Navigation SXC (VR mode) Using this function, you can search scene minute-by-minute from the recorded title list. N Using the TITLE LIST button 1. With the unit in Stop mode/Playback mode, press the TITLE LIST button. HDD JAN/01/2008 17:30 PR1 Title List 1/3 No. 2. Press the ▲▼ buttons to select an entry you want to play from Title List, then press the YELLOW(C) button.
SELECT CONTENTS SXCV 1. Press the BLUE(D) button to select Contents. M This function is possible only when the disc contains the selected contents. HDD JAN/01/2008 17:30 PR1 Title List 1/3 No.
editing Playing Entries in the Playlist SXC (VR mode) Follow these instructions to play the playlist entries. N Using the PLAY LIST button 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. 2. Press the ▲▼ buttons to select the playlist you want to play, then press the OK or PLAY ( ) button. 3. Press the STOP ( ) button to stop playing. The screen returns to the Playlist screen. HDD JAN/02/2008 13:47 Playlist 1/3 No.
Editing a Scene for the Playlist SXC (VR mode) Follow these instructions to edit scenes for a playlist. 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. 2. Press the ▲▼ buttons to select the title you want to edit from the Playlist, then press the RED(A) button. The Edit menu is displayed. 3. Press the ▲▼ buttons to select Edit Playlist, then press the OK or ► button. The Edit Playlist screen is displayed. HDD JAN/02/2008 13:47 Playlist 1/3 No.
editing Moving a Scene (Changing the Position of a Scene) To setup, follow steps 1 to 3 on page 81. 4-1. Press the ▲▼◄► buttons to select the scene you want to move (change the position), then press the GREEN(B) button. • A yellow selection window is displayed on the scene to be moved. 5. Press the ▲▼◄► buttons to select the position to which you want to move the selected scene, then select the OK button. M HDD JAN/02/2008 13:47 Edit Playlist Scene No.
Deleting a Playlist Entry from the Playlist N Using the PLAY LIST button 1. With the unit in Stop mode/Playback mode, press the PLAY LIST button. 3. Press the RED(A) button to select Edit. Edit menu is displayed. 4. Press the ▲▼ buttons to select Delete, then press the OK or ► button. • You will be prompted with the delete confirmation message “Do you want to delete?”. 5. Press the ◄► buttons to select Yes, then press the OK button.
editing COPYING FROM HDD TO DVD OR VICE-VERSA About the Copy Screen 1 HDD Selected Items: Copy 2 To : DVD 4 DVD 001 JAN/01/2008 1 002 JAN/01/2008 1 3 MPEG2 003 JAN/01/2008 1 0 SP 8 47MB Start Copy Sort Selection a CHECK 5 6 1 Total size and number of selected titles for copying 2 Title to be copied 3 This shows available disc space 4 The location where the copied files are stored 5 Copy start button 6 Sort button (Date, Name, Length, Channel Info) 3 Available : 4099MB Source :
x 21% b Bar Type Cancel c Channel 8. After a successful copy, “The title is successfully copied” message is displayed. DVD-Video Copy 1. Press the OPEN/CLOSE button and place a DVD-Video disc on the disc tray. 2. Press the OPEN/CLOSE button to close the disc tray. DVD HDD Copying 3. During the playback, press the COPY button. Copy will be started. M The Copy function will be disabled in the following cases : - If you try to copy in the section of a menu.
editing 6. Press the ▲▼ buttons to select the MP3, Photo or DivX file you want to copy, then press the MARKER button until a checkmark appears. • If you don’t want to copy a certain one of the checked entries, simply select that entry and press the MARKER button to deselect it until the checkmark disappears. 7. Press the ►▲▼ buttons to select the target media,then press the OK button. • You can create a new folder by pressing the GREEN(B) button. 8. Press the RED(A) button to select Start Copy.
M Pressing the EXIT ( CD Selected Items: 76.8MB (2) Source : DVD Copying... Copy Available : 236715MB To : Y :ROOT Free space 236615 MB Number of E file MP3 : 1 /(1)24 File Name :E 01.MP3 ###(2)## 1.mp3 9 MP3 8 36.6MB Start Copy t ROOT E MP3 (3) 33% New Folder eEXIT CHANGING THE NAME OF MUSIC/PHOTO/DIVX FILE S You can rename a Music, Photo or DivX file copied to HDD. 1. Press the ▲▼ buttons to select the entry you want to rename, then press the RED(A) button. 2.
editing DISC MANAGER Editing the Disc Name XCV Follow these instructions to give a name to a disc. 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Disc Manager, then press the OK or ► button. 3. Press the ◄► buttons to select Rename, then press the OK button. The Rename screen is displayed. 4. Select the desired characters using the ▲▼◄► buttons, then press the OK button. 5. Press the BLUE(D) button to select Save. A disc name is given to the disc.
Delete All Title Lists XCV 1. With the unit in Stop mode, press the MENU button. 3. Press the ▲▼◄► buttons to select Delete All, then press the OK button. • You will be prompted with the confirmation message “Do you want to delete all title lists?”. • When Protected Entry exists: The Delete All Title List function will not operate. If there is a title containing a still picture, however, that function will not operate. If you want to delete a protected entry, disable Protect for it on the Lock item.
editing Formatting a Disc SXC Use these instructions to format a disc. The disc protect should also be cleared. 1. With the unit in Stop mode, press the MENU button. HDD 2. Press the ▲▼ buttons to select Disc Manager, then press the OK or ► button. Disc Manager Used Space 000:39 ( 1.68 GB) Available Space 065:19 XP ( 231.01 GB) 3. Press the ◄► buttons to select Format, then press the OK button.
M Once a disc is finalised, you cannot delete entries from the record list. After being finalised, the DVD-R/-RW(video mode) operates in the same manner as a DVD-Video. Depending on the disc type, the displayed screen may be different. Finalising time may be different depending on the amount of data recorded on the disc. EDITING Data on the disc will be damaged if the recorder is powered off during finalisation process. You can finalise the disc automatically using EZ Record.
reference TROUBLESHOOTING If your product malfunctions, go through the checkpoints below before contacting a Samsung authorised service centre. PROBLEM EXPLANATION/SOLUTION The input is displayed for a while when the power is turned on. The HDD & DVD RECORDER requires some time to initialize and the input will be displayed for approx. 10 seconds after it is turned on. Cannot record TV programmes. • Check whether the power cord is securely plugged into the power outlet.
EXPLANATION/SOLUTION No audio output. Check whether you have selected the correct digital output options in the Audio Output Options menu. (See pages 34~35) Timer lamp flickers • Check there is enough space in the disc or HDD for recording. • Check whether the current disc is recordable or not. Make sure to check before the start time of recording. Timer recording does not work properly. • Re-check the recording time and the end time settings again.
appendix SPECIFICATIONS General Input Power requirements AC 220~240 V, 50 Hz Power consumption 30 Watts / 2.2 Watts (Power off ) Weight 3.8 Kg Dimensions 430 mm(W) x 300 mm(D) x 55 mm(H) Operating temp. +5 °C to +35 °C Other conditions Keep level when operating. Less than 75% operating humidity Video Composite Video : 1.0 V p-p at 75ȍ load, sync negative Audio Max.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
