SAMSUNG Enterprise IP Solutions OfficeServ (& DCS Systems) User Guide for Digital Phones DS-5038S DS-5014S DS-5007S
Publication Information Samsung Telecoms reserves the right without prior notice to revise information in this publication for any reason. Samsung Telecoms also reserves the right without prior notice to make changes in design or components of equipment as engineering and manufacturing may warrant. Disclaimer Samsung Telecoms is not responsible for errors or problems arising from customers not installing, programming or operating their Samsung systems as described in this manual.
EU Declaration of Conformity (RTTE) Samsung Electronics Co., Ltd. 259 Gongdan-Dong, Gumi-City Kyungbuk, Korea, 730-030 (factory name, address) declare under our sole responsibility that the product Digital Keyphone System "DCS-816" to which this declaration relates is in conformity with RTTE Directive 1999/5/EC ( Annex II ) Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC:92/31/EEC By application of the following standards EN55022 : 1998 Inc. A1: 2000* ............................................
EU Declaration of Conformity (RTTE) Samsung Electronics Co., Ltd. 259 Gongdan-Dong, Gumi-City Kyungbuk, Korea, 730-030 (factory name, address) declare under our sole responsibility that the product Digital Keyphone System "DCS-408" to which this declaration relates is in conformity with RTTE Directive 1999/5/EC ( Annex II ) Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC:92/31/EEC By application of the following standards EN55022 : 1998 Inc. A1: 2000* ............................................
EU Declaration of Conformity (RTTE) Samsung Electronics Co., Ltd. 259 Gongdan-Dong, Gumi-City Kyungbuk, Korea, 730-030 (factory name, address) declare under our sole responsibility that the product Digital Keyphone System "DCS-408i" to which this declaration relates is in conformity with RTTE Directive 1999/5/EC ( Annex II ) Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC:92/31/EEC By application of the following standards EN55022 : 1998 Inc A1: 2000* ............................................
EU Declaration of Conformity (RTTE) Samsung Electronics Co., Ltd. 259 Gongdan-Dong, Gumi-City Kyungbuk, Korea, 730-030 (factory name, address) declare under our sole responsibility that the product Digital Keyphone System "iDCS100" to which this declaration relates is in conformity with RTTE Directive 1999/5/EC ( Annex II ) Low Voltage Directive 73/23/EEC:93/68/EEC EMC Directive 89/336/EEC:92/31/EEC By application of the following standards EN55022 : 1998, EN55024 : 1998 .................................
EU Declaration of Conformity (RTTE) Samsung Electronics Co., Ltd. 259 Gongdan-Dong, Gumi-City Kyungbuk, Korea, 730-030 (factory name, address) declare under our sole responsibility that the product Digital Keyphone System "iDCS500 / OfficeServ500" to which this declaration relates is in conformity with RTTE Directive 1999/5/EC ( Annex II ) Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC:92/31/EEC By application of the following standards .........................................................
Digital Keysets Intended Use This digital telephone is intended to be connected to a digital extension of a Samsung DCS-408, DCS-408i, DCS-816, iDCS100 or OfficeServ500 telephone system. The connection allows voice communication between the central processor unit and the telephone. It is not intended to be connected to any other telephone system or the public telephone network. Please read the provided user instructions carefully. © Samsung Telecoms (UK) Ltd.
ABOUT THIS GUIDE This User Guide provides instructions for installing and operating Samsung’s latest DS-5038S, 5014S and 5007S 2-line LCD phones with the Samsung DCS-816, DCS-408, DCS-408i, iDCS100 and Enterprise IP Solutions OfficeServ keyphone systems. Please take the time to read this guide to familiarise yourself with the features of your phone. SAFETY PRECAUTIONS For your safety and to ensure correct operation of your phone, note carefully the following important precautions.
CONTENTS INTRODUCTION About this Guide .............................................................................................................................. 1 Safety Precautions .......................................................................................................................... 1 PREPARATION Main Features.................................................................................................................................. 3 Front View of the Phone .................
PREPARATION Main Features Speed Dial For frequently used phone numbers, you can press a speed dial button to make a call. Pickup You can answer a call at another extension. Automatic Redial/Retry When your call is important but your party is busy on another call, you can use the automatic redial/retry function. The digital phone redials the called number automatically until your party is free to take your call.
Conference Calls This button is used when multiple parties need to be connected simultaneously during a phone conversation. Up to five parties, including you, can be connected in a conference call. Call Forwarding If you cannot answer an incoming call, the call can be forwarded to another extension (unconditionally, while you are busy on a call, or when you are away from your phone).
Front View of the Phone DS-5038S 38 Programmable Buttons Programmable Buttons Soft Buttons Scroll Button Speaker Status Indicator LCD screen Volume Button Redial Button Conference Button Transfer Button Dial Buttons Speaker Button Hold Button Programmable Buttons Microphone © Samsung Telecoms (UK) Ltd.
DS-5014S / DS-5007S DS-5014S (14 Programmable Buttons) DS-5007S (7 Programmable Buttons) Soft buttons and Scroll button Programmable Buttons Soft Buttons Scroll Button Speaker Status Indicator LCD screen Volume Button Redial Button Conference Button Transfer Button Dial Buttons Speaker Button Hold Button Microphone 6 © Samsung Telecoms (UK) Ltd.
Connecting Lines to the Phone 1 Connect the handset to the handset connection jack. 2 Connect the line cord to the phone line connection jack. © Samsung Telecoms (UK) Ltd.
THINGS YOU SHOULD KNOW Volume Adjustment The [ ] button is used for adjusting the volume of the handset, speaker, and ringer. Adjusting Handset/Speaker Volume During a call using the handset. Or, during a call using the [Speaker] button. 1 Press the [VolumeS] button to increase the volume. 2 Press the [TVolume] button to decrease the volume. Adjusting Ring Volume 8 1 To increase the ring volume, press the [VolumeS] button while the phone is ringing.
Entering Characters Using the dial buttons, you can easily enter and edit characters, numbers and special characters. “A” Button The “A” button is used to toggle between uppercase and lowercase characters. The “A” button of the DS-5038S, DS-5014S, and DS-5007S digital phone is the first button of the bottom row of the programmable buttons below the LCD screen. DS-5038S Button A DS-5014S Button A © Samsung Telecoms (UK) Ltd. .
DS-5007S Button A 10 © Samsung Telecoms (UK) Ltd. .
Procedure Press the [ ] button to move the cursor and insert or modify the desired character. Press the [ ] button to move the cursor one space to the right to enter the same character you previously selected. Procedures for entering characters are described below. Enter the characters according to the table below. Press button “A” to switch between uppercase and lowercase characters. Dial frequency 1 2 3 4 5 0 < > .
Button LEDs The [Transfer] button, [Hold] button, and [Speaker] button have LEDs that turn on or off according to the phone status. [Transfer] button [Hold] button [Speaker] button For incoming external calls or intercom calls ringing at your phone the trunk button LED or Call button LED will flash green. The trunk button LED will flash red on other digital phones with the same trunk button. While holding a call, the green LED of the trunk line will flash.
USING THE FEATURES Making a Call This function is used when you want to make a call to other stations or to make an external call. Calling an Extension Number This function is used when you want to make a call to other stations. © Samsung Telecoms (UK) Ltd. 1 Pick up the handset and check for dial tone. 2 Dial the extension number or station group number. Wait until the other party answers the call.
Calling an Outside number This function is used when you want to make an external call. NOTE 14 1 Pick up the handset. 2 Press the trunk or trunk group button or dial the trunk group access code (e.g., 9). 3 Dial the telephone number you want to call. 4 Finish your call by replacing the handset. If the hot keypad feature is used, you can make an external call without picking up the handset by dialling the trunk access code. © Samsung Telecoms (UK) Ltd.
Using a Speakerphone This function is used when you make a call with the speakerphone. 1 Press the [Speaker] button without lifting the handset. 2 Dial the telephone number you want to call. Or, press the trunk line / extension button. 3 Finish the call, by pressing the [Speaker] button. 1 Press the [NEW] button to disconnect your existing call, wait for dial tone and then make a new call on the same line.
Redial To redial the last outside telephone number you dialled. Press the [Redial] button. Or, dial [1][9]. Save Number with Redial To save the number you just dialled for later use. 16 1 Press the [SNR] button before hanging up. If the [SNR] button does not appear on your phone, press the Soft button corresponding to [SAVE] on the LCD screen. 2 The saved number can be redialled at any time by pressing the [SNR] button or dialling [1][7] . The same external trunk line will be selected for you.
Answering a Call This function is used when you want to answer an intercom or outside call. Using a Handset This function is used when you answer a call with the handset. 1 When the phone rings, pick up the handset. 2 To finish the call replace the handset. Using the Speakerphone This function is used when you answer a call with the speakerphone. © Samsung Telecoms (UK) Ltd. 1 When the phone rings, press the [Speaker] button without lifting the handset.
NOTE If a call is flashing at your phone but not ringing, you must press the flashing button to answer. Call Pickup This function is used when you pick up a call ringing at another station. 18 1 When, a call is ringing at another station, pick up the handset and listen for the dial tone. 2 Dial [6][5]. 3 Dial the number of the ringing station. © Samsung Telecoms (UK) Ltd.
Features Used During a Call These features are used while you are on a call. Hold an Intercom Call You can put the other party on hold if another intercom call arrives or you wish to use both hands for another task and resume the call later. © Samsung Telecoms (UK) Ltd. 1 Press the [Hold] button during a call. 2 Replace the handset to put the current call on hold. 3 To resume the call, lift the handset and then press the [Hold] button.
Hold an Outside Call You can put the other party on hold if another external call arrives or you wish to use both hands for another task and resume the call later. NOTE 20 1 While you are engaged in a conversation, press the [Hold] button. 2 The call on hold will flash green on your phone and this line will flash red on other stations. 3 To return to the held call, press the line button. The green LED will stop flashing. 4 Resume your conversation with the other party.
Mute During a call you can mute the handset transmitter or microphone while still listening to the other party. 1 Press the [MUTE] button. A red LED lights on the button. If the [MUTE] button does not appear on your phone, press the Soft button corresponding to [MUTE] on the LCD screen. 2 To clear the Mute function, press the [MUTE] button again. Transferring a Call You can transfer your call to another extension or return to the outside party. © Samsung Telecoms (UK) Ltd.
Conference Calls Up to 5 members, including you, can participate in a conference simultaneously. 1 Press the [Conference] button while on a call. You will hear conference tone. 2 Dial the number of the internal or external party you wish to add to the conference, wait for them to answer and press the [Conference] button again. 3 Dial the number of another internal or external party to be added to the conference, or press the [Conference] button to begin the conference.
ANNEX Troubleshooting Possible problems and their normal solutions are described below. Check this list before contacting your Samsung dealer for advice. Dial tone is not heard when you lift the handset or press the [Speaker] button. Check that the handset and phone line are connected to the handset connection jack and phone line connection jack of the phone. (Refer to 'Connecting Lines to the Phone' in this guide.) Nothing appears on the LCD screen while the phone is being used.
Excessive echo occurs during a page announcement or with Auto Answer set. If digital phones are too close to each other, sound from one speaker might echo during a page or on auto answer call. Maintain a reasonable distance between digital phones. Caller IDs are not displayed on the LCD screen. - Confirm with your system administrator that the caller ID service is available from your Telephone Company. - The caller may have blocked the sending of their caller ID.
Product Specifications The specifications of the DS-5038S, DS-5014S, and DS-5007S digital phones are as follows. Specification Item Model Name DS-5038S Weight (kg) 0.962 0.830 266×206×119 235×206×100 Size (mm) (width×length×height) Operating Operating Humidity (%) [Programmable] buttons Speakerphone AOM Telephone line thickness LCD © Samsung Telecoms (UK) Ltd.
Samsung Telecoms (U.K.