User’s Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera.
Instructions ƈ Use this camera in the following order Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.118) Take a picture. (p.26) Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.127) Check the camera’s power.
Contents READY ƃGetting to know your camera ƃDanger ƃWarning ƃCaution ƃSystem chart ƃIdentification of features ƈFront & Top ƈBack & Bottom ƈSide / 5-function button ƈCradle ƈSelf-timer lamp ƈCamera Status Lamp ƈMode icon ƃConnecting to a Power Source ƈUsing the SAC-41 ƈHow to charge the rechargeable battery (SLB-1237) with the SAC-41.
Contents PLAY ƃStarting play mode 64 ƈPlaying back a still image 64 ƈPlaying back a movie clip 65 ƈHow to capture the movie clip 65 66 ƈOn camera movie trimming ƈPlaying back a recorded voice 67 ƃLCD monitor indicator 68 ƃUsing the camera buttons to adjust the camera 69 70 ƈThumbnail / Enlargement button ƈVoice memo / Up button 70 ƈPlay & Pause / Down button 71 ƈDelete button 72 ƈRed eye / Printer button 73 74 ƈLeft / Right / Menu / OK button ƈAlbum button 75 ƈRemote control 78 ƃSetting up the play back fun
Getting to know your camera Thank you for buying a Samsung Digital Camera. ƃ Prior to using this camera, please read the user manual thoroughly. ƃ When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc.) to the A/S centre. ƃ Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment.
Danger ƈ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. ƈ Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion. ƈ Should any form of liquid or a foreign object enter the camera, do not use it.
Caution ƈ Leaking, overheating, or burst battery could result in fire or injury. ҮUse battery with the correct specification for the camera. ҮDo not short circuit, heat or dispose of battery in fire. ҮDo not insert the battery with the reverse polarities. ƈ Remove the battery when not planning to use the camera for a long period of time. Battery may leak corrosive electrolyte and permanently damage the camera’s components. ƈ Do not fire the flash while it is in contact with hands or objects.
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > Camera case DPOF compatible printer (see p.86) AC cord Remote control User manual, Product warranty Camera strap Software CD (see p.117) SD memory card/MMC (see p.
System chart System Requirements For Windows Computer (see p.127) PictBridge compatible printer(see p.91) ҮWindows 98/ 98SE/ 2000/ ME/ XP ҮPC with processor better than Pentium II 450MHz (Pentium 700MHz or better is recommended) Ү200MB of available hard-disk space (Over 1GB is recommended) ҮMinimum 64MB RAM (XP : 128MB) Ү1024x768 pixels, 16-bit colour display compatible monitor (24-bit colour display recommended) ҮDirectX 9.
Identification of features Front & Top Power button Shutter button Microphone Self-timer lamp Remote control sensor Auto Focus lamp Flash Lens / Lens cover Back & Bottom Camera status lamp Wide button Red-eye button / Printer button Zoom W button (Thumbnail) Zoom T button (Digital zoom) M(Mode/Album) button LCD monitor Play mode button Strap eyelet Speaker +/-, Delete button E (Effect) button Tripod ŝ10Ş 5 function button DC/USB/AV connection terminal Cradle connector
Identification of features Side/ 5-function button Voice memo / Voice Recording / Up button Menu / OK button Battery chamber cover Self-timer / Remote / Right button Flash / Left button Battery chamber Memory card slot Macro / Down button Play & Pause button Cradle ƈ You can recharge your rechargeable battery, transfer a captured image to print, and download images with the cradle.
Identification of features ƈ Self-timer lamp Icon Status Blinking Blinking Blinking Description For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. For the first 8 seconds, the lamp blinks at 1 second intervals. For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a Power Source ƈ You should use the rechargeable battery (SLB-1237) supplied with the camera. Be sure to charge the battery before using the camera. ƈ SLB-1237 rechargeable battery Specification Model SLB-1237 Type Lithium Ion Capacity 1280mAh Voltage 3.7V Charging time Approx. 170 MIN (Using the SAC-41) ƈ Number of images and battery life Still image Movie Battery life Number of images Recording time Approx. 180 MIN Approx. 340 Approx.
Connecting to a Power Source Using the SAC-41 If you have access to a mains supply, using an SAC-41 allows the camera to be used for long periods of time. Plug the SAC-41 into the DC connection terminal on the camera or cradle. Before turning on the camera power with an SAC-41, insert the rechargeable battery that was charged for over 10 minutes with turning off the camera. DANGER ƃ Always turn off the power before taking the SAC-41 out of the mains supply.
Connecting to a Power Source ƈ How to charge the rechargeable battery (SLB-1237) with the SAC-41. ƃ Charging with the camera 1. Insert the rechargeable battery into the battery chamber. 2. Put the SAC-41 into your power socket and DC connection terminal of the camera.
Connecting to a Power Source ƈ Charging LED of the SAC-41 Status Using the cradle Direct to the camera Being Charged Red LED is on Red LED is on Charging is complete Green LED is on Green LED is on Charging error Red LED is off or blinking Red LED is off or blinking ƃ If there is a charging error, please check all the power connections are in place. ƃ A USB cable for transmitting data can’t be used for charging the rechargeable battery.
Connecting to a Power Source Using the battery : If the camera does not turn on after you have inserted battery, please check whether the battery are inserted with the correct polarity(+/-). 1. Open the battery chamber cover by pushing in the direction of the arrow. 2. Insert the battery taking note of the polarity (+ / -). 3. To close the battery chamber cover, push it until it clicks. Removing the battery 1. Turn off the camera power. Open the battery chamber cover and move the battery holder aside.
Instructions on how to use the memory card ƃ Be sure to format the memory card (see p.99) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ƃ Turn off the camera power whenever the memory card is being inserted or removed. ƃ Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card INFORMATION ƃ Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card. ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult the enclosed manual for using the MMC Cards. The SD memory card has a write protect switch that prevents image files from being deleted or formatted. By sliding the switch to the bottom of the SD memory card, the data will be protected.
Inserting the memory card 1. Turn off the camera’s power and pull the battery chamber cover in the direction of the arrow to open. 2. Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor), and then push the memory card into the card slot until you hear a click. 3. To close, push the battery chamber cover until you hear a click. If the memory card does not slide in smoothly, do not attempt to insert it by force.
When Using the Camera for the First Time ƈ Charge the rechargeable battery fully before using the camera for the first time. ƈ When the camera is turned on for the first time, a menu will be displayed to set date, time and language in the LCD monitor. This menu will not be displayed after setting up the date, time and language. Set up the date, time and language before using this camera. ƃ Setting up the date, time and date type 1.
LCD monitor indicator ƈ The LCD monitor displays information about the shooting functions and selections. ƈ You can see the wider angle of subject by using the Wide button (p.54). The illustrations of this manual are based on the normal angle mode. ؊ ؉ ڹ ؈ ں ؇ ڻ ؆ ڼ ڽ ۇ ھ ۆ ڿ ۅ ۀ ۄ ۂ ہ ۃ [Image & Full Status] No. Description 1 Recording mode Icons Page p.58 2 Battery p.17 3 Continuous shot/ Stabiliser p.61 4 Flash p.37 5 Self-timer p.
LCD monitor indicator 17 Image quality / Frame rate 18 Image size 19 TIFF p.60 p.59 Number of available shots remaining 15 Remaining time (Movie clip/ Voice recording) 00:01:30/ 01:00:00 p.19 p.19 20 Voice memo/ Mic. off p.29/27 21 Optical/ Digital Zoom bar/ Digital Zoom rate p.32 Changing the recording mode ƈ You can select the desired working mode by the M (mode) button located on the back of the camera and [MODE], [MODE SET] menu.
Changing the recording mode ƃChanging the recording mode : If the [STILL & MOVIE] menu was selected Steps from 1-4 are the same as those for selecting the [MODE] menu. 5. The recording mode used just before will display. 6. Press the M (Mode) button located on the back of the camera and the recording mode will change to the movie clip mode. 7. Press the M (Mode) button again and a still image mode selected on the [MODE SET] menu will be selected.
Changing the recording mode ƃChanging the recording mode : If the [CUSTOM] menu was selected Steps from 1-4 are the same as those for selecting the [MODE] menu. 5. The recording mode used just before will display. 6. Press the M (Mode) button located on the back of the camera and the mode selection menu will display. 7. You can select modes set as on in the [MODE SET] menu by pressing the Up/ Down/ Left/ Right buttons. Refer to page 58 for more information about using the [MODE SET] menu.
Starting the recording mode ƈHow to use the Auto mode Use this for shooting basic still images. 1. Select the [FULL] sub menu on the [MODE] menu (p.23). 2. Select the Auto mode by pressing the M (Mode) button (p.24). 3. Point the camera towards the subject and compose the image by using the LCD monitor. 4. Press the shutter button to capture an image.
Starting the recording mode ƈRecording the movie clip without voice You can record the movie clip without voice. Steps from 1-3 are the same as those for MOVIE CLIP mode. 4. Press the Up button and the ( ) icon will display on the LCD monitor. 5. Press the shutter button and movie clip is recorded for as long as the available recording time without voice. 6. To stop the recording, press the shutter button again.
Starting the recording mode ƈHow to use the Scene modes Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the [FULL] sub menu on the [MODE] menu (p.23). 2. Select the Scene mode by pressing the M (Mode) button (p.24). 3. Point the camera towards the subject and compose the image by using the LCD monitor. 4. Press the shutter button to capture an image. ſ The scene modes are listed below.
Starting the recording mode ƈHow to use the VOICE RECORDING mode A voice recording can be recorded for as long as the available recording time of the memory capacity allows. (Max: 1 hour) 1. In any mode with the exception of the Movie clip, select the VOICE RECORDING mode by pressing the Voice recording button twice. 2. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded RECORD : SHUTTER for as long as the available recording time (Max : 1 hour) allows.
Things to Watch Out for When Taking Pictures ƈPressing the shutter button down half way Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [Lightly press the shutter button] [Press the shutter button] ƈThe available recording time may vary depending on shooting conditions and camera settings.
Using the camera buttons to adjust the camera ƈThe recording mode function can be set up by using the camera buttons. POWER button : When the camera is turned on, the power lamp turns on and off. ƃUsed for turning the camera’s power on/ off. ƃIf there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 98 for more information about the auto power off function.
ZOOM W / T button ƈThis camera has a 4.8X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 24X. ſ The illustrations as shown below are for your information about using the W/ T button. The pre-view images are can be different with the illustrations. ƃTELE Zoom Optical zoom TELE Digital zoom TELE : Pressing the ZOOM T button. This will zoom into the subject i.e. the subject will appear nearer. : When the maximum (4.
ZOOM W / T button INFORMATION ƃImages taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. ƃYou may notice a decrease in image quality when using the digital zoom. ƃTo view more clear digital zoom image, press the shutter button halfway at the maximum (4.8X) optical zoom position and press the zoom T button again. ƃThe digital zoom can’t be activated in the [NIGHT], [CHILDREN], [CLOSE UP], [TEXT] and [FIREWORKS] scene modes.
Voice recording( ) / Voice memo( ) / UP button ƈWhile the menu is showing, press the UP button to move up the submenu cursor. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo button. You can record your voice or add your voice-over to a stored still image. Refer to page 29 for more information about the voice recording. ƃRecording a voice memo 1. Press the M (Mode) button to select a Recording mode with the exception of Movie clip mode. 2.
Macro( ) / Down button ƈWhile the menu is showing, press the DOWN button to move from the main menu to a submenu, or to move down the submenu cursor. When the menu is not showing, you can use the MACRO/ DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator displays on the LCD monitor.
Macro( ) / Down button ƈAvailable focusing method, by recording mode ( O: Selectable , X: Not selectable, ∞: Infinity focus range) Mode Normal O O O Macro O X O Auto macro X O X SCENE Mode Normal O O O ū X X ū ū O ū O Macro X X X X X O X X X X X Auto macro X X X X O X X X X X X Focus lock ƈTo focus on the subject positioned outside of the centre, use the focus lock function. ƃUsing the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame.
Flash ( ) / Left button ƈWhen the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. ƈWhen the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button. ƃSelecting the flash mode 1. Press the M (Mode) button to select a Recording [Selecting the Auto flash] mode with the exception of Movie clip mode (p.24). 2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor. 3.
Flash ( ) / Left button ƃFlash mode indicator Menu tab Flash mode Description Auto flash If the subject or background is dark, the camera flash will operate automatically. Auto & Red eye reduction If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the redeye reduction function. Fill in flash The flash fires regardless of available light. The intensity of the flash will be controlled, according to the prevailing conditions.
Self-timer( ) / Remote ( ) / Right button ƈ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. The right button can also be used to move to a sub menu to select a different setting. ƈ When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Selftimer ( ) and Remote ( ) button. This function is used when the photographer would also like to be in the image. ƃ Using the self-timer and remote control 1.
Self-timer( ) / Remote ( ) / Right button ƃRemote control range When you take a picture by using the remote control, refer to the illustrations shown alongside about the remote control range. [ Shutter button on the remote control ] ƃReplacing battery for the remote control Make sure the + polarity is toward the top and the - polarity is toward the bottom while installing battery for the remote control. Replace battery for the remote control in the local service centre. Use the CR 2025 3V battery.
MENU / OK button ƈMENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE RECORDING mode is selected.
M (Mode) button ƃHow to use the mode button : In case of [FULL] sub menu and Auto mode [Auto mode] [Pressing the Mode button] [Pressing the Right button] PROGRAM SET:OK [Program mode] AUTO SET:OK [Mode selection menu] MOVIE [Pressing the Left button] SET:OK [Movie cliip mode] [Pressing the Up button] NIGHT PORTRAIT [Pressing the Left/ Right button] SET:OK [Scene mode] SET:OK [Selecting a scene mode] ſ Press the Mode button and the mode selection menu will disappear.
M (Mode) button ƃHow to use the mode button : In case of [CUSTOM] sub menu and Auto mode ſ The illustrated images and modes are for your information. They can be changed as the [MODE SET] menu setting.
E (Effect) button ƈIt is possible to add special effects to your images by using this button ƈStill image mode : You can select the colour, focus, composite and frame menus. Movie clip mode : You can select the colour and stabiliser menus.
Special Effect : Colour 3. Select a desired sub menu by pressing the Up/Down button and press the OK button. : No effect is added to the image : Captured images will be stored in black and white. : Captured images will be stored in a sepia tone (a gradient of yellowish brown colours). : Captured images will be stored in a red tone. : Captured images will be stored in a green tone. : Captured images will be stored in a blue tone. : Save the image in negative mode. 4.
Special Effect : Composite shooting ƈYou can combine 2 ~ 4 different shots in a still image. 1. Press the E button in the program mode. 2. Select the COMP. menu by pressing the Left/ Right button. 3. Select a desired sub menu by pressing the Up/ Down button and press the OK button. - : cancels the composite shooting - : 2 different shots are combined in a still image. - : 3 different shots are combined in a still image. - : 4 different shots are combined in a still image.
Special Effect : Composite shooting ƃChanging a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the +/- button. 2. A previous image will be deleted and new frame will display. If there is an image taken before, press the +/- button again and a previous image will be deleted again. Pressing the +/- button [Before taking the 3rd shot] [Moving backward to the 2nd shot] 3.
Special Effect : Photo Frame ƈYou can add 5 types of frame-like borders to a still image you want to capture. 1. Press the E button in the program mode. 2. Select the FRAME menu by pressing the Left/ Right button. 3. Select a desired sub menu by pressing the Up/ Down button and press the OK button. - : The photo frame will not be added. [Frame 1] [Frame 2] [Frame 4] [Frame 5] 4. The photo frame will appear.
Movie Clip frame stabiliser ƈThis function helps stabiliser images captured during movie recording. You can select this menu only in the MOVIE CLIP mode. ƃHow to use this function 1. Press the E button in the Movie clip mode. 2. Select the STABIL. menu by pressing the Left/ Right button. 3. Select a desired sub menu by pressing the Up/ Down button and press the OK button. : Movie clip frame stabiliser function becomes disabled. : Prevents camera shake during movie recording.
+/- button ƈ You can use the +/- button to adjust the values for the RGB, ISO, white balance, exposure compensation and Long Time shutter speed. Main menu Sub menu RGB R (Red), G (Green), B (Blue) ISO AUTO, 50, 100, 200, 400 WHITE BALANCE AUTO, DAYLIGHT, CLOUDY, FLUORESCENT H, FLUORESCENT L, TUNGSTEN, CUSTOM. Exposure compensation -2.0 ~ 0.0 ~ +2.0 (0.
+/- button ƈ ISO : You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. ƃ Selecting an ISO Sensitivity 1. Press the +/- button, and then use the UP and DOWN buttons to select the ISO icon( ). The ISO menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to select the desired ISO sensitivity value. - AUTO : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness.
+/- button ƃ Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the CUSTOM ( ) menu of the White Balance. 2. Place a sheet of white paper in front of the camera so that the LCD monitor shows only white, and then press the SHUTTER button. 3. Your custom white balance value is stored.
+/- button ƈ Long Time shutter : This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in NIGHT SCENE mode, you can set the shutter speed and aperture values to your preference. ƃ Adjusting the shutter speed and aperture values 1. Select the [NIGHT] scene mode. (p.24) 2. Press +/- button and Long Time shutter menu (LT, For selecting shutter speed and aperture value) will be displayed. 3.
Wide button ƈ You can select the wide angle mode or normal angle mode by using this button. When you select the wide angle mode the LCD monitor size will change from 4:3 to 16:9 screen size. 8ZM[[QVO \PM ?QLM J]\\WV [Normal angle mode] [Wide angle mode] ſ When you select the wide angle mode, sub menus of [SIZE] menu are changed. For detail sub menu, refer to below table.
Using the LCD monitor to adjust the camera settings ƈYou can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. INFORMATION ƃThe menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being processed. - When there is no battery capacity.
Using the LCD monitor to adjust the camera settings Menu tab Main menu Sub menu Camera working mode SIZE (Movie clip) (Normal angle mode) 640X480 320X240 160X120 - SIZE (Movie clip) (Wide angle mode) 640X360 384X216 Page p.59 256X144 TIFF SUPER FINE FINE NORMAL 30 FPS 15 FPS MULTI CENTER-WEIGHTED SPOT - SINGLE CONTINUOUS AEB - SOFT NORMAL VIVID - QUALITY FRAME RATE p.60 p.61 METERING SHOOTING p.61 SHARPNESS p.62 FULL OSD OSD INFORMATION SAVE MODE BASIC OSD p.
How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( ). 2. Use the LEFT and RIGHT buttons to navigate through the menus. SIZE 2592X1944 5 5 5 5 Press the LEFT or RIGHT button. QUALITY <1.. 2272X1704 2048X1536 1600X1200 1024X768 TIFF SUPER FINE Press the LEFT or RIGHT button. METERING MULTI CENTER-WEIGHTED SPOT FINE NORMAL 3. Use the UP and DOWN buttons to select a sub menu.
Mode set ƈYou can select the desired recording mode. ƈIf you select the [CUSTOM] sub menu in the [MODE] menu, you can select modes set as on in this menu by pressing the M button. - The maximum custom modes you can select are 7 and the minimum custom modes are 3. - If you select over 7 custom modes, the menus are set as off automatically from the lower placed sub menu.
Size ƈYou can select the image size appropriate for your application.
Quality / Frame rate ƈYou can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Mode STILL IMAGE mode MOVIE CLIP mode Icon TIFF Sub menu TIFF SUPER FINE FINE NORMAL 30FPS 15FPS File Format tif jpeg jpeg jpeg mp4 mp4 <1..
Metering ƈ If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [MULTI] : Exposure will be calculated based on an average of the available light in the image area. However, METERING the calculation will be biased towards the centre of MULTI CENTER-WEIGHTED the image area. This is suitable for general use. SPOT [CENTER-WEIGHTED] : Exposure will be calculated based on an average of the available light in the image area.
Sharpness ƈYou can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. Sub menu Icon SHARPNESS SOFT NORMAL VIVID Description The edges of the image are softened. SOFT This effect is suitable for editing images on your PC. The edges of the image are sharp. NORMAL This is suitable for printing.
Save / Load a specific camera configuration (MySET) ƈ Use the MySET mode to save frequently used camera settings (Save Myset) and use it later (Load Myset) ƃ Saving the camera configuration : 1. Use the camera buttons and menu to set desired camera configuration. MYSET 2. Select the Program mode and press the Menu button. MYSET1 SAVE MYSET2 LOAD 3. Press the Left/Right buttons to select the [MYSET] menu tap. MYSET3 4. Select the [SAVE] menu by pressing the Up / Down button and press the Right button.
Starting play mode ƈIf the memory card is inserted in the camera, all the camera functions apply only to the memory card. ƈIf the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. ƈIf you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switch to Play mode and press it again to switch to Recording mode. ƈYou can turn the power on with the play mode button. The camera is turned on in play mode.
Starting play mode ƃPlaying back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip that you want to play back by using the LEFT/ RIGHT button. If you select a movie clip, the movie clip indicator ( ) will be displayed on the LCD monitor. 4. Press the play & pause button ( ) to play back a movie clip file. - To pause a movie clip file while playing it back, press the play & pause button again.
Starting play mode ƈOn camera movie trimming : You can extract desired frames of movie clip during the movie clip play back. 1. Select a desired movie clip in the play mode. 2. Play back the movie clip by pressing the Play & Pause button. 3. Press the Pause button at the point of the movie clip that you want to start extracting. 4. Press the zoom T button. 5. Press the Play & Pause button and the extracted range will be displayed on the status bar. TRIM : T CAPTURE:E 6.
Starting play mode ƃPlaying back a recorded voice Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded voice that you want to play back by using the LEFT/ RIGHT button. If you select a recorded voice file, the voice indicator ( ) will be displayed on the LCD monitor. 4. Press the play & pause button ( ) to play back a recorded voice file. - To pause a recorded voice file, while playing it back, press the play & pause button again.
LCD monitor indicator ƈThe LCD monitor displays shooting information about the displayed image. ۀ ڹ ں ڻ ڼ ڽ ھ ڿ No. Description Icon 1 Play mode - 2 Battery p.17 3 Movie clip / Voice memo - 4 Protect indicator p.85 5 DPOF indicator p.86 6 Remote control indicator - 7 Memory card indicator - 8 Folder name and Stored image number 100-0012 Page - ƈ Select the [IMAGE INFORMATION] sub menu of the [OSD INFORMATION] menu and you can check the recording information.
Using the camera buttons to adjust the camera ƈIn Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail( )/ Enlargement( ) button ƃYou can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ƃThumbnail display 1. While an image is displayed full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3.
Thumbnail( ) / Enlargement( ) button ƃThe maximum enlargement rate in proportion to the image size. Image size 5M 4M 3M 2M 1M VGA Maximum Normal angle enlargement Wide angle rate X9.0 X6.45 X5.3 X5.0 X4.0 X3.3 X4.6 X4.2 X3.6 X3.5 X2.5 X2.4 ƃTrimming : You can extract part of the image that you want and save it separately. TRIMMING? 1. Select an image that you want to enlarge and press TRIM CANCEL the enlargement button. CONFIRM:OK 2.
Voice ( ) memo / Up button 3. Press the shutter button to start recording and voice will be recorded to the still image for 10 seconds. While the voice is recording, the recording status window will be displayed as shown alongside. STOP : SHUTTER 4. The recording can be stopped by pressing the shutter button again. 5. The ( ) icon will be displayed on the LCD monitor after voice memo recording has finished. - Voice memos can’t be recorded onto movie clip and voice recording files.
Delete ( ) button ƈThis deletes images stored on the memory. ƃDeleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT/ RIGHT button and press the DELETE( ) button. 2. A message will display as shown alongside on the LCD monitor. 3. Select the submenu values by pressing the UP/ DOWN button and then press the OK button. If [DELETE] is selected: deletes the selected images. If [CANCEL] is selected : cancels "Delete Image".
Red eye / Printer button ( ) ƈ When an image that have Red-eye effect (When taking a people or animal with a photographic flash, the eye will be red) plays back, this button will remove the red colour. 1. In the Play mode, select an image that has red-eye effect by pressing the Left / Right button. 2. Press the Red eye button ( ) and a menu bar for removing the red-eye effect will display. SAVE:OK [An image that has red-eye effect] CANCEL:E [An image removed the red-eye effect] 3.
Left / Right / Menu / OK button ƈ LEFT / RIGHT/ MENU/ OK buttons activate the following. - LEFT button - RIGHT button - MENU button - OK button ŝ74Ş : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. While the menu is not showing, press the LEFT button to select the previous image. : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move an secondary menu.
Album button ƈYou can organise the captured still images (except for the TIFF file) into albums by using the Album button. ƈThis camera has 8 albums and each album can take up to 100 images. ƈThe album menu loading time depends on the memory card type. ƈHow to use the album ƃSelecting the album 1. In the play mode, press the Album button. 2. Select the ALBUM menu by pressing the Left/ Right button. SELECT : OK 3. Select a desired album by pressing the Up/Down button.
Album button 4. Press the OK button and a confirmation window for inserting an image will display. Select a desired sub menu by Pressing the Up/Down button and press the OK button. [YES] : inserts an image into the selected album. [NO] : cancels the inserting image. ƃRemoving still images from the album 1. Select an album. 2. Press the delete button and a confirmation window will display. 3. Select a desired sub menu by pressing the Up/ Down button and press the OK button.
Album button ƃPlaying back the albums Ƅ Playing back all of the albums 1. Select ( ) album. 2. Select SHOW menu by pressing the Left/ Right button. 3. Select a desired sub menu by pressing the Up/ Down button. Press the OK button and the slide show will start. ( ) : The slide show is closed after one cycle. ( ) : The slide show is repeated until the OK button is PLAY:OK pressed. Ƅ Playing a desired album 1. Select a desired album. 2. Select SHOW menu by pressing the Left/ Right button. 3.
Remote control ƈ After connecting the camera with an external monitor, you can see the captured image by using the remote control. ƈ Remote control is optional in some countries. ƈ In play mode, you can use the remote control to set up the play mode functions. Enlargement button Thumbnail button Display / Information button Up / Down / Left / Right button Play & Pause button ƈ See below for operation of buttons - Enlargement button : In play mode, this button enlarges the selected image.
Remote control - Display / Information button : In play mode, you can view the information of the selected image by pressing this button. - Up / Down/ Left / Right button : In play mode, you can select a still image or movie clip by pressing the Left/ Right button. In play mode, different parts of the enlarged image can be viewed by pressing these buttons. In the thumbnail mode, you can move to a desired image by pressing these buttons.
Setting up the play back function using the LCD monitor ƈPLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY button.
Setting up the play back function using the LCD monitor ƈThis menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu tab Main menu IMAGES AUTO SET Sub menu Secondary menu ONE PIC - ALL PICS - NO - YES - Page p. 92 p. 93 AUTO POSTCARD CARD LETTER SIZE 4X6 L 2L A4 A3 AUTO CUSTOM SET FULL p. 93 1 2 LAYOUT 4 8 9 16 AUTO TYPE PLAIN PHOTO FAST PHO.
Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page AUTO DRAFT QUALITY NORMAL FINE AUTO p. 93 CUSTOM SET DATE OFF ON AUTO FILE NAME OFF ON STANDARD - INDEX - NO - YES - NO - YES - PRINT DPOF PRINT p. 94 p. 94 RESET ſ Menus are subject to change without prior notice. ŝ82Ş p.
Rotating an image ƈ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [ROTATE] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button.
Resize ƈChange the resolution (size) of pictures taken. Select [USER IMAGE] to save an image to be the start-up image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
Protecting images ƈThis is used to protect specific shots from being accidentally erased (LOCK). It also unprotects images that have been previously protected (UNLOCK). ƃProtecting Images PROTECT SELECT 1. Press the play mode button and press the menu button. ALL 2. Press the LEFT/ RIGHT button and select the [PROTECT] menu tab. EXIT:MENU MOVE: 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
Deleting all images ƈOf all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card. ƃDeleting all images 1. Press the play mode button and press the menu button.
DPOF : STANDARD ƈThis function allows you to embed print quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] DPOF menu tab. STANDARD ONE PIC 3. Select the [STANDARD] menu by pressing the INDEX ALL PICS PRINT SIZE UP/ DOWN button and press the RIGHT button. CANCEL 4. Use the UP and DOWN buttons to select [ONE PIC] or BACK: SET:OK [ALL PICS], and then press the OK button.
DPOF : PRINT SIZE ƈYou can specify the print size when printing images stored on the memory card. The [PRINT SIZE] menu is available only for DPOF 1.1 compatible printers. ƃSetting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [PRINT SIZE] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
On Screen Display information ƈ You can check shooting information about the displayed image. 1. Press the play mode button and press the menu button. 2. Select the [OSD INFORMATION] menu tab by pressing the LEFT/ RIGHT button. 3. Select a desired sub menu by pressing the UP/ DOWN button. - [FULL OSD] : All information shown as below is displayed. - [BASIC OSD] : Some information shown as below is displayed. - [IMAGE INFORMATION] : Shooting information about the displayed image is displayed.
Copy To Card ƈ This enables you to copy image files, movie clips and voice recording files to the memory card. ƃ Copying to the Memory Card 1. Press the play mode button and press the menu button. 2. Select the [COPY TO CARD] menu tab by pressing the COPY TO CARD LEFT/ RIGHT button. NO YES 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. - [NO] : Cancels "Copy to Card".
PictBridge ƈ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ƃ Setting up the camera for connection with the printer 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select [SETUP] menu tab. 3. Select [USB] menu by pressing the UP/ DOWN button and press the RIGHT button. 4.
PictBridge : Picture Selection ƈ Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. - Pressing the shutter button : Currently displayed image will be printed with the printer’s default setting. - Pressing the Left/ Right button : Selects a previous/ next image. PRINT:SHUTTER MENU:OK ƈ Select pictures to print 1. Press the Menu button. 2. The [IMAGES] menu will appear. IMAGES 3.
PictBridge : Print Setting ƈ AUTO SET 1. Use the LEFT and RIGHT buttons to select the [AUTO SET] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. [NO] : [CUSTOM SET] values are kept. [YES] : All values in the [CUSTOM SET] are automatically changed. AUTO SET NO YES MOVE: ƈ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1.
PictBridge : Printing ƈ When the wide angle image is printed as a real size, 8% of the left and right side of the image may not be printed. Check that your printer can support the wide angle image when you print the image. When you print the image on the photo labs, ask them the image has to be printed as a wide angle image. (Some photo labs may not support the wide angle size print.) ƈ Printing Pictures 1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab. 2.
PictBridge : RESET ƈ Initialises user-changed configurations. 1. Use the LEFT and RIGHT buttons to select the [RESET] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. If [NO] is selected : Settings will not be reset. If [YES] is selected : All print and image settings will be reset. RESET NO YES MOVE: ſ Default print setting varies depending on the printer manufacturer.
Setup menu ƈIn this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Menu tab Main menu FILE PWR SAVE Sub menu Secondary menu SERIES - RESET - OFF, 1, 3, 5MIN - Page p.97 p.98 ENGLISH ጥૹ FRANÇAIS DEUTSCH ESPAÑOL ITALIANO P”CCK»… PORTUGUÊS DUTCH DANSK SVENSKA SUOMI ⁹ᷘ LANGUAGE p.
Setup menu Menu tab Main menu Sub menu DARK - LCD NORMAL - VIDEO Q.VIEW RESET Secondary menu BRIGHT - NTSC - PAL - OFF, 0.5, 1, 3SEC - NO - YES - Page p.102 p.103 p.105 p.105 ſ Menus are subject to change without prior notice. File name ƈ This function allows the user to select the file naming format. ƃ Assigning File Names 1. In any mode with the exception of Voice Recording mode, press the MENU button. SETUP 2.
File name INFORMATION ƃThe first stored folder name is 100SSCAM, and the first file name is SL550001. ƃ File names are assigned sequentially from SL550001 ƍ SL550002 ƍ ~ ƍ SL559999. ƃThe folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM ƍ 101SSCAM ƍ ~ ƍ 999SSCAM. ƃThe files used with the memory card conform to the DCF(Design rule for Camera File systems) format.
Language ƈThere is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. ƃSetting Language 1. In any mode with the exception of Voice Recording mode, press the MENU button. SETUP 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. FILE ENGLISH PWR SAVE 3. Select the [LANGUAGE] menu by pressing the ጥૹ LANGUAGE FRANÇAIS UP/ DOWN button and press the RIGHT button.
Setting up the Date / Time / Date type ƈYou can change the date and time that will be displayed on the captured images and set up the date type. ƃSetting Date / Time & Selecting Date Format 1. In any mode with the exception of Voice Recording mode, press the MENU button. SETUP 2. Press the LEFT/ RIGHT button and select the [SETUP] FILE 05/08/01 13:00 PWR SAVE menu tab. LANGUAGE YYYY/MM/DD 3. Select the [DATE&TIME] menu by pressing the FORMAT DATE&TIME UP/ DOWN button and press the RIGHT button.
Auto Focus lamp ƈYou can turn on and off the Auto Focus lamp ƃHow to set up the lamp 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [AF LAMP] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. If [OFF] is selected : The AF lamp will not light up. If [ON] is selected : The AF lamp will light up.
Connecting an External Device (USB) ƈ You can select an external device to which you want to connect the camera using the USB cable. ƃ Selecting an External Device 1. In any mode with the exception of Voice Recording mode, press the MENU button. SETUP 2. Press the LEFT/ RIGHT button and select the [SETUP] DATE&TIME COMPUTER IMPRINT PRINTER menu tab. AF LAMP SOUND 3. Select the [USB] menu by pressing the UP/ DOWN button USB and press the RIGHT button. BACK: SET:OK 4.
Selecting Video out type ƈ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ƃ Setting the Video Out Type 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [VIDEO] menu by pressing the UP/ DOWN button and press the RIGHT button. 4.
Selecting Video out type INFORMATION ƃ NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. ƃ PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway. ƃ When using a TV as an external monitor, you will need to select the external or AV channel of the TV. ƃ There will be a digital noise on the external monitor, but it is not a malfunction.
Quick view ƈ If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with still images. ƃ Setting Quick View 1. In any mode with the exception of Voice Recording mode, press the MENU button. SETUP 2. Press the LEFT/ RIGHT button and select the [SETUP] SOUND OFF USB 0.5 SEC menu tab. LCD 1 SEC VIDEO 3. Select the [Q.VIEW] menu by pressing the UP/ DOWN 3 SEC Q.
Setting up the Mycam menu ƈ You can set up a start up image, start up sound and shutter sound. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu. The items indicated by are default settings. Menu tab Main menu S.IMAGE S.SOUND SH.SOUND Sub menu Page OFF LOGO USER IMAGE 1 USER IMAGE 2 OFF SOUND 1 SOUND 2 SOUND 3 OFF SH.SOUND 1 SH.SOUND 2 SH.SOUND 3 p.106 p.107 p.107 ſ Menus are subject to change without prior notice.
Start up sound ƈ You can select the sound that is activated whenever the camera is turned on. ƃ Setting the Startup Sound 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [MYCAM] menu tab. 3. Select the [S.SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. 5. Press the menu button twice and the menu will disappear.
Important notes Be sure to observe the following precautions! ƈThis unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes ƈCaution on Using the Lens - If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor. - Pay attention not to get fingerprints or foreign substances on the surface of the lens. - When the lens cover opens, the outer lens that you can see is for auto focus. When using or cleaning this camera, handle the outer lens with care. ƈIf the digital camera is not used for a long period, an electric discharge can occur.
Warning indicator ƈThere are several warnings that may appear on the LCD display CARD ERROR! ϛMemory card error ƍ Turn off the camera power and turn it on again ƍ Insert the memory card again ƍ Insert the memory card and format the memory card (p.99) MEMORY ERROR! ϛInternal memory error ƍ Turn off the camera power and turn it on again ƍ Format the memory with the memory card removed. (p.
Warning indicator LOW LIGHT! ϛWhen taking pictures in dark places ƍ Take pictures in Flash Photography mode. OUT OF NUMBER ϛWhen selecting too many printing pages in the PictBridge menu. ƍ Select printing page within the limitation. Before contacting a service centre ƈPlease check the following The camera doesn’t switch on ϛThere is low battery capacity ƍ Insert charged battery (p.
Before contacting a service centre Camera does not take images when pressing the Shutter button ϛThere is insufficient memory capacity ƍ Delete unnecessary image files ϛThe memory card has not been formatted ƍ Format the memory card (p.99) ϛThe memory card is exhausted ƍ Insert a new memory card ϛThe memory card is locked ƍ Refer to [CARD LOCKED!] error message (p.110) ϛThe camera’s power is off ƍ Turn the camera power on ϛThe battery are exhausted ƍ Insert charged battery.
Before contacting a service centre The camera buttons do not operate ϛCamera malfunction ƍ Remove /re-insert battery and switch the camera on A card error has occurred while the memory card is in the camera.
Specifications Type Image Sensor Effective Pixel Total Pixel 1/2.5ůCCD Approx. 5.0 Mega-pixel Approx. 5.2 Mega-pixel SHD Lens f = 4.6 ~ 22.2mm Focal Length (35mm film equivalent : 28~135 mm) Lens F No. F 3.3 ~ F 4.8 Still Image mode : 1.0X ~ 5.0X, Movie Clip mode : 1.0X ~ 2.0X Digital Zoom Play mode : 1.0X ~ 9.0X (depends on image size) Viewfinder LCD Monitor 2.
Specifications Media File Format Internal memory : Approx. 24MB flash memory External memory : SD Card/MMC (Up to 1GB guaranteed) Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.
Software Notes Please ensure that you read the instruction manual carefully before use. ϛThe attached software is a camera driver and image editing software tool for Windows. ϛUnder no circumstances should all or part of either the software or the user manual be reproduced. ϛCopyrights for software are licensed only for use with a camera. ϛIn the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software After inserting the software CD provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. ƈ Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. INFORMATION ƃ Close other programs before installing the application software. ƃ Before installing the application software, disconnect the USB connection. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.
Setting up the application software 4. A window will open. Click the [Next(N) >] button. [ቄඁ!] 5. DirectX Installation is completed. Click the [Finish] button and then the QuickTime installation will be started. * The system will not reboot even if you click the [Finish] button. * The screen shot of step 5 can be different from the illustration depending on the system requirements. [Click !] 6. Click [Next >] to begin installing QuickTime. [Click !] 7. A Welcome window will appear.
Setting up the application software 8. The Software License Agreement window will open, asking you to agree to the licensing. Use the button on the bottom left to select the language of your choice, and then click [Agree] to accept the license agreement. The installation will proceed to the next stage. If you do not agree to the license agreement, click [Disagree]. The installation will be canceled. If the language of your choice is not listed, please select [English]. 9.
Setting up the application software ſ The QuickTime program folder will appear. 13. The QuickTime Settings – Introduction window appears. Click [Next >]. Click on the Close button to close the folder. [Click !] [Click !] 14. Set the transfer rate for downloading content from the Internet, and then click [Next >]. [Click !] 16. Specify the file types you want to associate with QuickTime. Click [Finish]. [Click !] 15. Set up your browser for QuickTime plug-in. Click [Next >]. [Click !] 17.
Setting up the application software * The QuickTime Player will launch, the readme file will open, and the Step 18 window will open. Click on the Close 1 and Close 2 buttons to exit the program. [Close 1 button] [Close 2 button] 18. A window where you can choose the program you want to install will appear. Click [Install]. For information on application software, please refer to page 117. [Click !] INFORMATION ƃ If you select [Exit] at step 18, the application program installation will be cancelled.
Setting up the application software 20. A window will open. Click the [Next >] button. [Click !] INFORMATION ƃ If you select [Cancel] at step 20, a window for installing Digimax Reader will be displayed. 21. A destination selection window will open. Click [Next >]. To copy the files to another folder, click [Browse..] and choose a folder you want. [Click !] 22. A window will open, asking you to choose a folder to which program icons will be added. Click [Next >] button.
Setting up the application software 24. Digimax Master installation is successfully completed. Click the [Finish] button to install Digimax Reader. * The screen shot of step 24 can be different from the illustration depending on the system requirements. [Click !] 25. A window will be displayed as shown alongside. Click the [INSTALL] button. - If you click the [MANUAL] button instructions, instructions for using Digimax reader will be displayed.
Setting up the application software 28. A destination selection window will open. Click the [Next >] button. To copy the files to another folder, click [Browse...] and choose a folder you want. [Click !] 29. Digimax Reader Installation is completed. The system will not reboot even if the [Yes, I want to restart the computer now] option is selected. [Click !] 30. To apply changes, you must restart the computer. Select [Yes, I want to restart my computer now], and then click the [OK] button.
Setting up the application software 33. If you can see [Removable Disk] under [My computer], the camera driver installation was successful. Now you can transfer image files from the camera to PC via the USB cable. INFORMATION ƃ If you have installed the camera driver, The [Found New Hardware Wizard] may not open. ƃ On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied.
Starting PC mode Ү If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". Ү In this mode, you can download stored images to your PC through the USB cable. Ү The LCD monitor is always turned off in PC mode. Ү The camera status lamp will blink when the files are transferring via the USB connection. ƈ Connecting the camera to a PC 1. In any mode with the exception of Voice Recording mode, press the Menu button. 2.
Starting PC mode ƈ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk ƍ DCIM ƍ 100SSCAM]. The image files will then be displayed. 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click the [Cut] or [Copy] menu.
Starting PC mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - By using [Digimax Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.
Removing the USB Driver for Windows 98SE ƈ To remove the USB driver, refer to the process shown below. 1. Click [Start ƍ Settings] and click [Control Panel]. 2. Double-click [System]. 3. Select [Device manager ƍ Hard Disk Controller ƍ Samsung DSC] and click the [Remove] button. [Click !] 4. Click the [OK] button. The camera is removed from the system.
Removing the USB Driver for Windows 98SE 5. Click [Start ƍ Settings ƍ Control Panel] and double click [Add/Remove programs]. 6. The [Add/Remove Programs Properties] window will open. Click [Digimax L55W] and click the [Add/Remove] button. [Click !] 7. Uninstallation is complete. Click the [Finish] button and the window will disappear.
Removable Disk ƈ To use this camera as a Removable Disk, install (p.118) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My computer] or [Windows Explorer]. 3. Image files stored in the Removable Disk (DCIM ƍ 100SSCAM) can be transferred to the PC. INFORMATION Important information whilst using the Removable Disk ƃ The [Removable Disk] indicator will not show when the camera power is off or the USB cable is removed.
Removing the removable disk ƈ Windows 98 / 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, you have to wait until the lamp illuminates. 2. Unplug the USB cable. ƈ Windows 2000 / ME / XP (The illustrations may be different from the real display in accordance with the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, you have to wait until the lamp illuminates. 2.
Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. [Click !] Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. This camera is compatible with MAC OS 10.0 or later. 3.
Digimax Master ƈ You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows except for the Windows 98. ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master]. ƃ Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera and your PC. - To download the captured images, select the [Select All(A)] button.
Digimax Master 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. 5. Click [Next(N) >] button. [Click !] 6. A window will open as shown alongside. The destination of the selected folder will be displayed on the upper side of the window.
Digimax Master ƃ Image viewer : You can view the stored images. ڹ ڽ ھ ڿ ں ڻ ڼ - Image viewer functions are listed below. ڹMenu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ںImage selection window : You can select the desired images in this window. ڻMedia type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
Digimax Master ƃ Image edit : You can edit the still image. ڹ ڼ ں ڻ - Image edit functions are listed below. ڹEdit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu. [Retouch] : You can change image or insert effects on the image. See the [Help] menu. ںDrawing tools : Tools for editing an image. ڻImage display window : a selected image displays in this window.
Digimax Master ƃ Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ڹ ں - Movie clip edit functions are listed below. ڹEdit menu : You can select the following menus. [Add Media] : You can add other media elements to a movie. [Edit Clip] : You can change the brightness, contrast, colour and saturation. [Effects] : You can insert an effect. [Set Text] : You can insert texts. [Narrate] : You can insert a narration.
Digimax Reader ƈ Digimax Reader is a Text recognition program. You can save an image file that is captured in the Text mode, as a text file with this program. This software is only compatible with Windows. ƈ To start the program, click [Start ƍ Programs ƍ Digimax Reader Eng]. The following screen will appear. ƈ How to use the Digimax Reader 1. Connect the camera and the PC with a USB cable and download the images that were stored in the camera to the PC.
Digimax Reader 4. Select the image you want to save as a text file. * Only an image that was taken with a SAMSUNG camera can be opened. 5. Click the Area Analysis ( ) icon to scan the image. 6. Part of the image you selected will be displayed as shown. 7. Click the Character Recognition ( ) icon. The part selected in the previous step will be recognized as text. ) 8. To save the section as a text, click the Save ( icon. A window as shown alongside will be displayed.
Digimax Reader 9. Select the file type that you want. Selectable file types : *.TXT, *.HWP, *.DOC, *.RTF INFORMATION ƃ To get an image that can be recognized as a text : - Keep a distance that you can capture the image clearly between the subject and the camera. - The subject need to be centered. - Avoid camera shake to get a good image. ƃ Refer to the [Help] menu in Digimax Reader for further information. FAQ ƈ Please check the following if the USB connection malfunctions.
FAQ Case 5] There is an unexpected error during file transfer ƍ Turn the camera power off and on again. Transfer the file again. [Case 6] How do I know my computer supports a USB Interface? ƍ Check the USB port in your computer or keyboard. ƍ Check the OS version. A USB Interface is available in Windows 98, 98SE, 2000, ME, XP. ƍ Check [Universal Serial Bus controllers] in Device Manager. Do the following to checks [Universal Serial Bus controllers].
FAQ [Case 9] When I open the Device Manager (by clicking Start ƍ (Settings) ƍ Control Panel ƍ (Performance and Maintenance) ƍ System ƍ (Hardware) ƍ Device Manager), there areèUnknown DeviceséorèOther Deviceséentries with a yellow question mark (?) beside them or devices with an exclamation mark (!) beside them. ƍ Right-click on the entry with the question (?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera the again.
FAQ ƈ If a PC (Windows 98) stops responding while the camera and PC are connected repeatedly ƍ If a PC (Windows 98) is turned on for a long time and the camera is connected repeatedly the PC may not recognise the camera. In this case, re-start the PC. ƈ If a PC connected with the camera stops responding while Windows is starting. ƍ In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC.
MEMO ŝ146Ş
MEMO ŝ147Ş
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX : (1) 201-902-9342 WESTERN REGIONAL OFFICE 18600 BROADWICK ST., RANCHO DOMINGUEZ, CA 90220, U.S.A. TEL : (1) 310-900-5263/5264 FAX : (1) 310-537-1566 www.