COLOR TELEVISION RECEIVER Chassis : Model : COLOR TELEVISION RECEIVER KS2A(N) CL15A8L7X/GSU CL15A8L7X/STR CL21A8W7X/RCL CL25A6W7X/RCL CL15A8L7X/RCL CL21A8W7X/GSU CL21A8W7X/STR CONTENTS 1. Precautions 2. Reference Information 3. Specifications 4. Alignment and Adjustments 5. Troubleshooting 6. Exploded Views and Parts List 7. Electrical Parts List 8. Block Diagrams 9. Wiring Diagram 10.
Precautions 1. Precautions Follow these safety, servicing and ESD precautions to prevent damage and protect against potential hazards such as electrical shock and X-rays. 1-1 Safety Precautions 1. Be sure that all of the built-in protective devices are replaced. Restore any missing protective shields. 2. When reinstalling the chassis and its assemblies, be sure to restore all protective devices, including: nonmetallic control knobs and compartment covers. 3.
Precautions 1-1 Safety Precautions (Continued) 9. High voltage is maintained within specified limits by close-tolerance, safety-related components and adjustments. If the high voltage exceeds the specified limits, check each of the special components. 10. Design Alteration Warning: Never alter or add to the mechanical or electrical design of this unit. Example: Do not add auxiliary audio or video connectors. Such alterations might create a safety hazard.
Precautions 1-2 Servicing Precautions Warning1: First read the “Safety Precautions” section of this manual. If some unforeseen circumstance creates a conflict betwe en the servicing and safety precautions, always follow the safety precautions. Warning2: An electrolytic capacitor installed with the wrong polarity might explode. 1. Servicing precautions are printed on the cabinet. Follow them. 2.
Precautions 1-3 Precautions for Electrostatically Sensitive Devices (ESDs) 1. Some semiconductor (“solid state”) devices are easily damaged by static electricity. Such components are called Electrostatically Sensitive Devices (ESDs); examples include integrated circuits and some field-effect transistors. The following techniques will reduce the occurrence of component damage caused by static electricity. 2.
Reference Information 2.
Reference Information Table 2-2 Table of Acronyms ABL AC ACC AF AFC AFT AGC AM ANSI APC APC A/V AVC BAL BPF B-Y CATV CB CCD CCTV Ch CRT CW DC DVM EIA ESD ESD FBP FBT FF FM FS GND G-Y H HF HI-FI IC IC IF 2-2 Automatic Brightness Limiter Alternating Current Automatic Chroma Control Audio Frequency Automatic Frequency Control Automatic Fine Tuning Automatic Gain Control Amplitude Modulation American National Standards Institute Automatic Phase Control Automatic Picture Control Audio-Video Automatic Volume C
Reference Information 2-2 IC Line Up Table 2 - 3 IC Line - Up NO 1 BOARD MAIN LOC.
Reference Information Table 2 - 3 IC Line - Up NO BOARD LOC. NO SPEC DESCRIPTION REMARK IC501 IC502 CRT TDA6101Q Video Output AMP R.G.
Specifications 3. Specifications Television System Multi Antena Input Consumption Power Requirements Frequency NTSC-M, PAL N.
Alignment and Adjustments 4. Alignment and Adjustments 4-1 General Alignment Instructions 1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync and focus. 5. Avoid overload. Excessive signal from a sweep generator might overload the front-end of the TV. When inserting signal markers, do not allow the marker generator to distort test results. 2. Observe the picture for good black and white details.
Alignment and Adjustments 4-4 FOCUS Adjustment 1. Input a black and white signal. 2. Adjust the tuning control for the clearest picture. 3. Adjust the FOCUS control for well defined scanning lines in the center area of the screen. 4-5 SCREEN Adjustment 1. Input Toshiba Pattern 2. Enter “Service Mode”.(Refer to “4-8-1 Service Mode”) 3. Select “G2-Adjust”. 4. Set the values as below. Table 1.
Alignment and Adjustments 4-6 E2PROM (IC902) Replacement 1. When IC902 is replaced, all adjustment data revert to the initial values. So, all adjustment values when servicing should be readjusted. 2. After IC902 is replaced, connect the AC power supply cord. 3. Turn the power switch ON. 4. In stand-by, warm up the TV for at least 10 seconds. 5. Power on the TV. 4-7 White Balance Adjustment ■ Equipment : Color-Analyzer (CA-100) ■ Input Signal : Pattern signal (Toshiba pattern) 1.
Alignment and Adjustments 4-8 Factory Adjustment 4-8-1 Service Mode 1. To enter the “Service Mode”, Press the remote-control keys in this sequence : - If you do not have Factory remote-control PICTURE OFF MUTE 1,8,2 PICTURE ON - If you have Factory remote-control PICTURE ON DISPLAY ( ) FACTORY 2. After the Service Mode is entered, the initial screen is as shown in the figure below. xx xx xx * These hexa digits are check sum value which * depends on the MICOM version.
Alignment and Adjustments SIM-408A USA,LATIN FACTORY (VDP IC VDP3108B) 4-8-2 Deflection (Memory Data) - SIM408A USA, LATIN FACTORY (VDP IC VDP3108B) 4-8-2(A) GEOMETRIC ADJUSTMENT VALUE INCH 27V 1.3R Model DEFLECTION H Bow H Angle H Dscc V SHIFT V AMP V SLOPE V SC H EW H TRAPEZIUM H PARABOLA H SYMMETRY H CORNER H SHIFT PIP CONTRAST PIP TINT PIP PAL V.POS PIP NTSC V.POS PIP H.
Alignment and Adjustments 4-8-2(B) SCREEN CHANGE (I2C BUS GEOMETRIC ADJUSTMENT) 1 V Shift 6 V Amp 2 V Slope 7 V SC 3 H EW 8 H Trapizium 4 H Parabola 9 H Symmetry 5 H Corner 10 H Shift 4-6 Samsung Electronics
15 4 H CORNER H SHIFT PIP CONTRAST PIP TINT PIP PAL V.POS PIP NTSC V.POS PIP H.POS 4-8-2(C) VIDEO ADJUST 1 Control Control FIX FIX FIX FIX FIX 0 0 0 0 12 12 12 INCH 27V 1.3R Model VIDEO ADJUST1 RED CUT OFF GREEN CUT OFF BLUE CUT OFF RED DRIVE GREEN DRIVE BLUE DRIVE SUB BRIGHT SUB CONTRAST SUB COLOR SUB TINT BCL THRESHOLD BCLGAIN BCL TIME DVD SUB TINT N.
13 90 0 BCL TIME DVD SUB TINT N. YC DELAY FIX FIX FIX 10 100 3 10 100 3 27V 1.3R 23V 1.
SOFT LIMIT SLOPE B FIX 11 4 11 4 11 GAIN 1 (VIDEO) FIX4 255 DELAY 1HARD (VIDEO)LIMIT FIX FIX 3 255 3 255 3 MODULATION ON/OFF FIX0 FIX 0 0 0 0 0 PEAK VIDEO REF A TILT POINT FIX 0 0 0 0 0 PEAK VIDEO GAIN FIX0 B TILT POINT 0 FIX 114 114 LIMIT VALUE FIX 74 74 74 1 (VIDEO) 11 7 11 7 VELOCITYGAIN DELAY FIX FIX 7 1 (VIDEO) 3 10 3 10 VELOCITYDELAY CORING FIX FIX 10 VIDEO REF 20 FIX FIX 20 0 20 0 20 ACC-REFPEAKNote 2.
Alignment and Adjustments SIM-408A USA,LATIN FACTORY (VDP IC VDP3130Y) 4-8-3 Deflection (Memory SIM-408A USA,LATINData) FACTORY (VDP IC VDP3130Y) - SIM408A USA, LATIN FACTORY (VDP IC VDP3130Y) 4-8-3(A) GEOMETRIC ADJUSTMENT VALUE INCH INCH INCH MODEL MODEL DEFLECTION INIT DEFLECTION INIT Bow HHBow FIXFIX Angle HHAngle FIXFIX Dscc HHDscc FIXFIX SHIFT -40 Control Control VVSHIFT -40 5 Control V AMP V AMP 5 Control SLOPE Control VVSLOPE -2-2 Control V SC -7 V SC -7 FIXFIX H E W 64 Control HEW 64 Control TRA
Alignment and Adjustments 4-8-2(C) VIDEO 2 INCH ADJUST INCH INCH Model Model VIDEOADJUST2 ADJUST2 VIDEO STRETCH-BTHR BBSTRETCH-BTHR B DTRETCH-BTLT B DTRETCH-BTLT STERTCH-BAM BBSTERTCH-BAM CORING CORING NTSCCOMB COMBFILTER FILTER NTSC RGBBRIGHT BRIGHT RGB RG B CONTRAST RG B CONTRAST EHT TIME EHT TIME EHT VERTICAL EHT VERTICAL DTI CORING DTI CORING DTI GAIN DTI GAIN DTI BAND DTI BAND EHT OFFSET EHT OFFSET EHT HORIZONTAL EHT HORIZONTAL INIT INIT 5050 88 44 3131 11 00 00 0 0 60 60 0 0 1 1 1 1 0 0 0 0 FIXFIX
Alignment and Adjustments 4-8-3(E) OTHERS INCH INCH Model INCH VSU FIX Model108 VSU2 0 OTHERS INIT FIX H VSU QE W 0108 FIXFIX H VSU2 ZOOM Parabola 8 0 FIXFIX H H16:9 Parabola -10 0 FIXFIX QE W DVD TINT CONTROL 1 8 FIXFIX H ZOOM Parabola PAL V SHIFT -10 FIXFIX H 16:9 Parabola PAL H SHIFT DVD TINT CONTROL 1 FIXFIX Melidy Volume 5 FIXFIX PAL V SHIFT PIPPAL BRIGHT FIXFIX H SHIFT 5 FIXFIX PIPMelidy COLORVolume PIP BRIGHT FIX H Control WHITE BALANCE PIP COLOR FIX L Control H Control WHITE BALANCE L Control TX
Alignment and Adjustments 4-9 MICOM 4-9-1 Pin Layout Write Protect EEPROM SDA 1 I/O 2 I/O EEPROM SCL Bus-Stop Main SDA 3 IO I/O 50 4 I/O I/O 49 5 I/O 48 Main SCL Sound Reset Video Reset VDD 2.5V GND VDD 3.3V CVBS Input VDD 2.5V 6 I/O 47 7 I/O 46 8 I/O 45 GND AFT Scart1 Ident Scart2 Ident Key 1 H-Sync V-Sync Key 3 Key 2 X-Ray Protect IR Input Stand-By LED 14 Time LED Samsung Electronics PWM 52 Tilt 51 N.C. Power Sound Mute N.C. 17 ADC 36 18 ADC 35 19 34 20 33 N.
Alignment and Adjustments 4-9-2 Pin Assignment Specification PIN NO FUNCTION ASSIGN IN/OUT ACTIVE H/L Out Low DESCRIPTION 1 I/O Write Protect 2 I/O ROM SDA I/O EEPROM Serial Data Line 3 I/O ROM SCL I/O EEPROM Serial Clock Line 4 I/O Bus Stop In 5 I/O Main SDA I/O 6 I/O Main SCL I/O Low Peripheral IC Serial Clock Line 7 I/O Sound Reset Out Low MSP IC Initial Control 8 I/O Video Reset Out VDP IC Initial Control 9 Vdd VDD 2.5V 10 GND 11 Vdd VDD 3.
Alignment and Adjustments 4-9-2 Pin Assignment Specification (Continued) PIN NO FUNCTION ASSIGN IN/OUT ACTIVE H/L Out Low DESCRIPTION 27 I/O 28 N.C. Not Used (Programmed Gound Level) 29 GND Analog Ground 30 Vdd 31 N.C. Not Used (Programmed Gound Level) 32 N.C. Micom Hardware Reset 33 Reset Reset In Low Crystal Oscillation Input 34 X-In X-TAL In In 6MHz Crystal Oscillation Output 35 X-Out X-TAL Out Out 6MHz Analog Ground 36 GND 37 Vdd VDD 2.
Troubleshooting 5.
Troubleshooting 5-2 No Raster (Sound OK) No Raster (Sound OK) Check Fusible Resistance Check the fusible resistance of abnormal volatge line Abnormal Abnormal Check voltage of heater Normal Check Abnormal RK,GK,BK Signal output from CRT PCB Normal Abnormal Check CRT and FBT Abnormal Check the signal output from IC201 Pin 63 Normal Check / Replace IC201 5-2 Check R.G.B Signal input to CRT PCB Abnormal Check tuner B+ and Main CVBS Check R.G.
Troubleshooting 5-3 No Sound No Sound Normal Check Speaker and Wire Normal Check the signal output from CN601, 602 Pins Abnormal Abnormal Check IC601 B+ Normal Check the signal input to IC601 Pin 47 Abnormal Normal Check the signal input to IC602 pins 4 ,12 Check tuner B+ and SIF Check IC602 B+ Abnormal Check/Replace the resistance of FD802 Normal Replace IC602 Abnormal Check/Replace IC601 Samsung Electronics Check B+ Line (8V) 5-3
Troubleshooting 5-4 Horizontal Lines Appear on screen Horizontal Lines Apper on screen Normal Normal Check the VDP Signal output from IC201 Pin 31 Check IC301 B+ (16V, -16V) Abnormal Check B+ Line and the fusible resistance of R425, 424 Abnormal Check/Replace IC301 5-4 Check IC201 Samsung Electronics
Exploded View & Parts List 6. Exploded View & Parts List 6-1 CS21A8W7X/GSU Samsung Electronics No Code No Description Specification Q’ty 1 AA64-00810J CABINET FRONT ;21A8,S907P+D004P ELT NT,HI 1-1 AA64-01230B INLAY-COVER ;D2,D3,PVC-SHEET,T0.4,94V0,-, 1 1-2 AA64-00814B KNOB POWER ;-,21A8,-,ABS,HB,G3676 1 1-3 AA61-60003J SPRING-CS ;-,SUS304,0.
Exploded View & Parts List 6-2 CL25A6W7X/RCL No 6-2 Code No Description Specification Q’ty 1 AA64-00238T CABINET FRONT ;25A6,G906P+B702P NT-AMER,H 1 1-1 AA64-00240B DOOR-AV ;-,25A6,BK702P,ABS,HB,BLK,-,- 1 1-2 AA64-00246E INLAY-AV ;25A6,S51A EL,PS SHEET,-,BLK,-, 1 1-3 AA64-70117B BADGE-BRAND ;AL,SS,SILVER,L65,R2000,-,- 1 1-4 AA61-00343A SPRING-CS ;-,SUS304,-,-,-,-,0.
Electrical Parts List 7. Electrical Parts List 7-1 CL15A8L7X/STR (CL15A8L7X/STR and CL15A8L7X/GSU Dissimilar parts) Loc. No. Code No. Description ; Specification Remark Loc. No. Code No.
Electrical Parts List Loc. No. C516 C605 C607 C608 C609 C610 C611 C612 C613 C617 C620 C621 C622 C623 C624 C625 C626 C627 C628 C629 C630 C631 C632 C634 C635 C636 C637 C638 C639 C640 C641 C642 C643 C644 C645 C646 C647 C648 C650 C652 C654 C656 C657 C660 C701 C707 C708 C803 C804 C805 C806 C807 C808 C809 C811 C814 C815 C816 C817 C818 C819 C820A C821 C822 C823 C825 C826 C827 C829 C831 C832 C837 C838 C839 C840 C841 C843 7-2 Code No.
Electrical Parts List Loc. No. DZ201 DZ202 DZ203 DZ204 DZ302 DZ303 DZ304 DZ305 DZ306 DZ402 DZ502 DZ601 DZ602 DZ603 DZ701 DZ702 DZ801 DZ802 DZ803 DZ804 DZ805 DZ806 DZ808 DZ901 DZ902 DZ903 DZ904 DZ905 DZ906 DZ907 FD801S FD802S FD803S FP801S IC201S IC301 IC501 IC502 IC503 IC601 IC602 IC801S IC803 IC804 IC901 IC902 IC903 IC904 J501 J831 J835 J909 JA701 L102 L103 L201 L202 L203 L204 L207 L208 L209 L301 L302 L303 L407 L409 L601 L602 L603 L604 L605 L606 L607 L608 L609 L610 Code No.
Electrical Parts List Loc. No. R228 R231 R232 R233 R234 R235 R236 R237 R238 R239 R241 R245 R246 R248 R249 R250 R251 R252 R253 R254 R255 R256 R258 R259 R260 R261 R262 R263 R264 R265 R267 R301 R302 R303 R304 R305 R306 R309 R310 R313 R314 R315 R401 R402 R403 R404 R405 R407 R408 R409 R410 R412 R414 R424 R425 R426 R428 R429 R432 R433 R434 R436 R437 R438 R501 R502 R503 R504 R505 R506 R507 R508 R509 R510 R511 R512 R513 7-4 Code No.
Electrical Parts List Loc. No. R829 R831 R832 R833 R835 R836 R901 R902 R903 R904 R905 R906 R907 R908 R909 R910 R911 R912 R913 R914 R915 R916 R917 R918 R919 R920 R921 R923 R924 R925 R926 R927 R929 R930 R931 R932 R933 R934 R935 R937 R938 R939 R940 R941 R942 R943 R945 R946 R947 R948 R952 R953 RL801S RM901 RR430S RY802S SW901 SW902 SW903 SW904 SW905 SW906 T401A T444S T801S TU01S V999S VP801S VX801S X201 X601 X901 Code No. Description ; Specification Remark 2003-001036 R-METAL OXIDE(S);3.3ohm,5%,2W,AF,TP,3.
Electrical Parts List Loc. No. Code No. Description ; Specification Remark Loc. No. Code No. Description ; Specification Remark ASSY-POWER,CORD * AA96-20109CASSY-POWER,CORD;-,CP2/NO(4.0),H/C300,KKP AA39-10006X POWER-CORD;-,KKP419C,KLCE-2F,2.286MT,3P, AA61-20284AHOLDER;-,P-CORD,PP,VO,BLK,KE-002 REMOCON * AA59-00141AREMOCON;-,TM58,SSM174PT,41,SS,L/GRAY,M 2802-000194 RESONATOR-CERAMIC;8MHz,1.0%,TP,8.5x4.
Electrical Parts List 7-3 CL21A8W7X/STR (CL21A8W7X/STR and CL21A8W7X/GSU Dissimilar parts) Loc. No. Code No. Description ; Specification Remark Loc. No. Code No.
Electrical Parts List Loc. No. C507 C508 C509 C511 C512 C513 C514 C515 C516 C605 C607 C608 C609 C610 C611 C612 C613 C617 C620 C621 C622 C623 C624 C625 C626 C627 C628 C629 C630 C631 C632 C634 C635 C636 C637 C638 C639 C640 C641 C642 C643 C644 C645 C646 C647 C648 C650 C652 C654 C656 C657 C660 C701 C707 C708 C803 C804 C805 C806 C807 C808 C809 C811 C814 C815 C816 C817 C818 C819 C820 C821 C822 C823 C825 C826 C827 C829 7-8 Code No.
Electrical Parts List Loc. No. D813 D816 D901 D902 D903 D904 D905 D906 D907 D908 DDR01 DDR01 DDR01 DH01 DH01 DZ201 DZ202 DZ203 DZ204 DZ302 DZ303 DZ304 DZ305 DZ306 DZ401 DZ402 DZ502 DZ601 DZ602 DZ603 DZ701 DZ702 DZ801 DZ802 DZ803 DZ804 DZ805 DZ806 DZ808 DZ901 DZ902 DZ903 DZ904 DZ905 DZ906 DZ907 F801A F801B FD801S FD802S FD803S FP801S IC201S IC202 IC301 IC401 IC501 IC502 IC503 IC601 IC602 IC801S IC803 IC804 IC901 IC902 IC903 IC904 J501 J699 J705 J706 J707 J909 JA701 JA702 L102 Code No.
Electrical Parts List Loc. No. Q907 Q908 Q909 Q910 Q911 R102 R103 R105 R106 R201 R202 R203 R204 R205 R206 R207 R208 R209 R210 R211 R212 R213 R214 R215 R216 R222 R223 R224 R225 R226 R228 R231 R232 R233 R234 R235 R236 R237 R238 R239 R241 R245 R246 R248 R249 R250 R251 R252 R253 R254 R255 R256 R258 R259 R260 R261 R262 R263 R264 R265 R267 R301 R302 R303 R304 R305 R306 R309 R310 R313 R314 R315 R401 R402 R403 R405 R407 7-10 Code No.
Electrical Parts List Loc. No. R626 R666 R701 R702 R703 R704 R705 R706 R707 R708 R709 R710 R715 R716 R719 R720 R721 R722 R723 R730 R731 R802 R803 R804 R805 R806 R807 R808 R809 R810 R811 R812 R813 R816 R817 R818 R819 R821 R822 R823 R824 R825 R826 R827 R828 R829 R831 R832 R833 R835 R836 R901 R902 R903 R904 R905 R906 R907 R908 R909 R910 R911 R912 R913 R914 R915 R916 R917 R918 R919 R920 R921 R923 R924 R925 R926 R927 Code No.
Electrical Parts List Loc. No. Code No. Description ; Specification Remark Loc. No. Code No. Description ; Specification Remark ASSY CRT * AA94-02328BASSY CRT;AA03-00138A,-300mG,A51LSH198X0 AA03-00138ACRT COLOR;A51LSH198X03,-,21DF,0.74,-,-,F ASSY ACCESSORY * AA94-02412DASSY ACCESSORY;CL15A8L7X/GSU,KS2A,CHILE 3721-000136 PLUG-CONVERSION;2P,4.
Electrical Parts List 7-5 CL25A6W7X/RCL Loc. No. Code No.
Electrical Parts List Loc. No. C804 C805 C806 C807 C808 C809 C811 C814 C815 C816 C817 C818 C819 C820 C821 C822 C823 C825 C826 C827 C829 C831 C832 C835 C837 C838 C839 C840 C841 C843 C901 C902 C905 C907 C908 C910 C911 C913 C914 C915 C916 C917 C918 C919 C920 C921 CG501 CG502 CG503 CN501B CN502B CN602 CN701 CN703A CN901 CN902 CR401S CR402S CR403S CR404S CR405S CW901 CX801S CX802S CY802S D201 D202 D203 D204 D205 D206 D207 D208 D209 D210 D212 D301 7-14 Code No.
Electrical Parts List Loc. No. IC401 IC501 IC502 IC503 IC601 IC602 IC801S IC803 IC804 IC901 IC902 IC903 IC904 J218 J501 J699 J705 J706 J707 J713 J909 JA701 JA702 L102 L103 L201 L202 L203 L204 L207 L208 L209 L301 L302 L303 L401 L402 L405 L406 L407 L408 L601 L602 L603 L604 L605 L606 L607 L608 L609 L610 L701 L702 L705 L706 L801 L802 L803 L804 L806 L807 L808 L809 L901 L903 L904 L905 L906 LR401S LX801S NT802S P801S PC801S Q201 Q202 Q203 Q204 Code No.
Electrical Parts List Loc. No. R261 R262 R263 R264 R265 R267 R301 R302 R303 R304 R305 R306 R309 R310 R313 R314 R315 R401 R402 R403 R405 R407 R408 R409 R410 R411 R412 R413 R414 R415 R417 R418 R420 R421 R424 R425 R426 R427 R428 R429 R432 R433 R434 R436 R437 R438 R440 R441 R501 R502 R503 R504 R505 R506 R507 R508 R509 R510 R511 R512 R513 R514 R515 R517 R518 R519 R520 R521 R522 R523 R524 R525 R526 R529 R601 R602 R603 7-16 Code No.
Electrical Parts List Loc. No. R904 R905 R906 R907 R908 R909 R910 R911 R912 R913 R914 R919 R920 R921 R922 R923 R924 R925 R926 R927 R929 R930 R931 R932 R933 R934 R935 R937 R938 R940 R941 R942 R943 R944 R945 R946 R947 R948 R952 R953 RL801S RR430S RY802S T401 T444S T801S TU01S V999S VP801S VX801S X201 X601 X901 Code No. Description ; Specification Remark 2001-000734 R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M 2001-000734 R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.2M 2001-000734 R-CARBON;4.7KOHM,5%,1/8W,AA,TP,1.8X3.
Electrical Parts List Loc. No. CS03 CS04 CS05 CS06 CS07 CS08 H001 ICS01 LS01 QS01 QS02 QS03 RS01 RS02 RS03 RS04 RS05 RS06 RS07 RS10 RS11 Code No. Description ; Specification Remark Loc. No. Code No. Description ; Specification Remark 2305-000412 C-FILM,MPEF;470nF,5%,63V,TP,-,5mm 2305-000412 C-FILM,MPEF;470nF,5%,63V,TP,-,5mm 2305-000412 C-FILM,MPEF;470nF,5%,63V,TP,-,5mm 2305-000412 C-FILM,MPEF;470nF,5%,63V,TP,-,5mm 2401-002009 C-AL;100uF,20%,16V,GP,TP,6.
Schematic Diagrams 8.
Schematic Diagrams 8-2 Block Diagram 8-2 Samsung Electronics
Wiring Diagram 9.
Schematic Diagrams 10.
Schematic Diagrams 10-2 MAIN 2/4 TP11 TP12 TP12 TP13 TP13 TP14 TP15 TP11 TP14 TP15 : Power Line : Signal Line 10-2 Samsung Electronics
Schematic Diagrams 10-3 MAIN 3/4 TP22 TP16 TP23 TP17 TP24 TP18 TP25 TP19 TP23 TP22 TP16 TP18 TP17 TP21 TP19 TP20 TP20 TP24 TP25 TP21 : Power Line : Signal Line Samsung Electronics 10-3
Schematic Diagrams 10-4 MAIN 4/4 TP32 TP26 TP33 TP27 TP34 TP28 TP35 TP29 TP35 TP33 TP26 TP34 TP27 TP32 TP31 TP28 TP29 TP30 TP30 TP31 : Power Line : Signal Line 10-4 Samsung Electronics
Schematic Diagrams 10-5 POWER (W/O -EW) Samsung Electronics 10-5
Schematic Diagrams 10-6 PIP 10-6 Samsung Electronics
Schematic Diagrams 10-7 VIDEO SWITCH Samsung Electronics 10-7