........................................................................................................................... CL29A10 CL34A10 CL29M6 CL21S8MQU CL25M6MQU CL29M6MQU CL29M16MQU CL29K5MQU .............
Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving.
CONTENTS Chapter 1: Your New TV . . . . . . . . . . . . . . . . 5 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Familiarizing Yourself with The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONTENTS Chapter 4: Special Features . . . . . . . . . . . . . 39 Changing the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 . . . . . . . . . . . . . . . . . . 42 DNIe JrTM (Digital Natural Image engine) Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Y Op UR NEW TV Cha ter One YOUR NEW TV List of Features Your TV was designed with the latest technology.
YOUR NEW TV Familiarizing Yourself with The TV Front Panel Buttons The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. CL29A10/CL34A10 CL29M6/CL25M6MQU/CL29M6MQU CL29K5MQU CL29M16MQU CL21S8MQU Œ TV/VIDEO ˆ Remote Control Sensor Press to change between viewing TV programs and signals from other components. ´ MENU Ø TIMER indicator Press to see an on-screen menu of your TV's features.
YOUR NEW TV Side Panel Jacks You can use the side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see pages 11 ~ 18.) CL29A10 CL34A10 CL29M6 CL25M6MQU/CL29M6MQU CL29K5MQU/CL29M16MQU CL21S8MQU Œ AUDIO INPUT jacks Used to connect the audio signals from a camcorder or video game. ´ VIDEO INPUT jack Used to connect a video signal from a camcorder or video game.
YOUR NEW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.) For more information on connecting equipment, see pages 11 – 18. CL29A10/CL34A10 CL29M6/CL29K5MQU/CL29M16MQU/ CL25M6MQU/CL29M6MQU/CL21S8MQU Œ VIDEO INPUT jack Video signals from VCRs, DVD players and similar devices.
YOUR NEW TV Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, DVD and cable box. See page 59 for details. Œ POWER Ô MODE Turns the TV on and off. ´ S.MODE Adjust the TV sound by selecting one of the preset factory settings (or select your personal, customized sound settings). ˇ P.
YOUR NEW TV Remote Control ¿ CH. SCAN Not available. ¸ VCR(DVD, DVR or STB) Controls REW (Rewind) Press to rewind a tape in your VCR(DVD, DVR or STB). STOP Press this button to stop a tape during play, record, rewind or fast forward. If the button is pressed during Full-Automatic play, the function will be can-celled. PLAY/PAUSE Press the PLAY/PAUSE button to play back prerecorded tapes or pause the tape. FF Press to fast forward the tape in your VCR(DVD, DVR or STB).
N C h aI NpS TAt LeL ATr I OTw o I N S TA L L AT I O N / Connecting VHF and UHF Antennas l If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads” below. If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads”, on page next. If you have two antennas, see “Separate VHF and UHF Antennas”, on page next.
I N S TA L L AT I O N Antennas with 75-ohm Round Leads 1 Plug the antenna lead into the VHF/UHF terminal on the bottom of the back panel. Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires a an optional combiner-adaptor (available at most electronics shops). 1 Connect both antenna leads to the combiner.
I N S TA L L AT I O N Connecting to a Cable Box that Descrambles All Channels 1 ▼ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”. Find the cable that is connected to the ANTENNA OUT terminal on your cable box. 2 Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below.
I N S TA L L AT I O N 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch. Incoming Cable Splitter RF (A/B) Switch Cable Box 5 Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch. Incoming Cable Splitter Cable Box RF (A/B) Switch 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.
I N S TA L L AT I O N 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. VCR Rear Panel TV Rear Panel Coaxial Cable A coaxial cable is usually included with a VCR. (If not, check your local electronics store). 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV. TV Rear Panel VCR Rear Panel Audio Cable 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.
I N S TA L L AT I O N Connecting an S-VHS VCR Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) 1 To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV. VCR Rear Panel TV Rear Panel Coaxial Cable 2 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the 2 AUDIO INPUT jacks on the TV.
I N S TA L L AT I O N Connecting a Second VCR to Record from the TV Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows: 1 TV Rear Panel VCR Input Panel Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN jacks on the VCR. Audio Cable (The VCR input jacks might be either on the front or on back of the VCR.
I N S TA L L AT I O N Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal Source” on page 37) 1 Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder. 2 Connect an audio cable between the AUDIO OUTPUT jack on the camcorder and the AUDIO terminals on the side of the TV.
I N S TA L L AT I O N Installing Batteries in the Remote Control 1 Slide the cover out completely. Install two AAA size batteries. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. ▼ 3 Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. ▼ 2 The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.
C h a pOtP EeR AT r I OTN h r e e O P E R AT I O N Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the front panel. Plug & Play Feature When the TV is initially powered On, five basic customer settings proceed automatically and subsequently: Setting the language, Video signal source, Ant. input check, Auto program and Clock. 1 Press the POWER button on the remote control. The message “Plug & Play” is displayed.
O P E R AT I O N 5 Press the MENU button and then the “Auto Program” is automatically displayed. Auto Program Air 3 Start Enter Return 6 Press the ENTER button to start “Auto Program” or press the MENU button to return. (refer to “Auto program” on page 25.) The TV will begin memorizing all of the available channels. Auto Program Air 7 Stop Enter Return 7 Press the ENTER button and then press the œ or √ button to move the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button.
O P E R AT I O N Viewing the Menus and On-Screen Displays Viewing the Menus The on-screen menus disappear from the screen after two minutes. ▼ 1 Input With the power on, press the MENU button. √ √ Source List : TV Edit Name The main menu appears on the screen. Its left side has five icons: Input, Picture, Sound, Channel and Setup. Move Enter Exit You can also use the MENU, CH and VOL buttons on the control panel of the TV to make selections.
O P E R AT I O N Selecting a Menu Language 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup Time Plug & Play Caption Language ▼ More Move √ √ √ : English Enter 2 Press the ▲ or ▼ button to select “Language”, then press the ENTER button. Setup Time Plug & Play Caption Language ▼ More Move Press the EXIT button to exit.
O P E R AT I O N Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
O P E R AT I O N Storing Channels in Memory (Automatic Method) 1 First, select the correct signal source (Air, STD, HRC, IRC). See steps 1~3 on previous page. Channel Move Adjust 2 Press the ▲ or ▼ button to select “Auto program” and then press the ENTER button. The “Auto Program” is automatically displayed.
O P E R AT I O N Adding and Erasing Channels (Manual Method) First, press the CH or CH button or the number buttons to select the channel you want to add or delete. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Channel Auto Program Add/Delete : Deleted Air/CATV : Air Name : ---- Move Enter 2 Press the ▲ or ▼ button to select “Add/Delete”, then press the ENTER button. Channel Enter 3 Press the EXIT button to exit.
O P E R AT I O N Changing Channels Using the Channel Buttons 1 Press the CH or CH button to change channels. When you press CH or CH , the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized. Directly Accessing Channels Use the number buttons to quickly tune to any channel. 1 Press the number buttons to go directly to a channel.
O P E R AT I O N Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a number, “*”, or a blank. When the INFO button is pressed, the channel label will appear next to the channel number. 1 Press the CH or CH button to tune to the channel that will be labeled. Air 11 Press the MENU button to display the menu.
O P E R AT I O N Adjusting the Volume Press the VOL + or – VOL – button to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound using the MUTE button. 1 Press the MUTE button and the sound cuts off. The word “Mute” will appear in the lower-left corner of the screen. Mute 2 To turn mute off, press the MUTE button to again, or simply press either the VOL + or VOL – button.
O P E R AT I O N Setting the Clock 1 Setup Press the MENU button to display the menu. Time Plug & Play Caption Language ▼ More Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Move √ √ √ : English Enter Time Press the ENTER button. Clock 09: - - am On Timer - - : - - am Off Timer - - : - - am Sleep Timer : Off On Timer Volume : 10 Press the ENTER button again to select the hours. (the hours digits will be highlighted).
O P E R AT I O N Customizing the Picture You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color, Tint and according to personal preference. (Alternatively, you can use one of the “Automatic” settings. See next page.) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
O P E R AT I O N Using Automatic Picture Settings Your TV has three automatic picture settings (“Dynamic”, “Standard” and “Movie” ) that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom by pressing the P.MODE button (or by making a selection from the menu). Or, you can select “Custom” which automatically recalls your personalized picture settings. 1 Picture Press the MENU button to display the menu.
O P E R AT I O N Customizing the Sound You can use the on-screen menus to adjust the bass, treble and balance according to individual preference. (Alternatively, you can use one of the “automatic” settings. See next page.) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Sound”, then press the ENTER button. Sound Move Enter 2 Press the ▲ or ▼ button to select “Custom”, then press the ENTER button.
O P E R AT I O N Using Automatic Sound Settings Your TV has four automatic sound settings (“Standard”, “Music”, “Movie” and “Speech”) that are preset at the factory. You can activate either Standard, Music, Movie or Speech by pressing the S.MODE button (or by making a selection from the menu). Or, you can select “Custom”, which automatically recalls your personalized sound settings. 1 Sound Press the MENU button to display the menu.
O P E R AT I O N Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue screen” mode to “Off”. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Setup”, then press the ENTER button.
O P E R AT I O N Setting The On/Off Melody You can hear clear a melody sound when the TV is powered on or Off. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Setup”, then press the ENTER button. Setup Time Plug & Play Caption Language ▼ More Move √ √ √ : English Enter Return 2 Press the ▲ or ▼ button to select “Melody”, then press the ENTER button.
O P E R AT I O N Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCRs, DVD, Set-Top Box and the TV source (broadcast or cable). Setting the Signal Source Press the MENU button to display menu, then press the ENTER button. Input √ √ Source List : TV Edit Name Move Enter 2 Press the ENTER button again. Press the ▲ or ▼ button to select signal source, then press the ENTER button.
O P E R AT I O N Assigning Names to External input mode 1 Press the MENU button to display menu, then press the ENTER button. Input √ √ Source List : TV Edit Name Move Enter Return 2 Press the ▲ or ▼ button to select the “Edit Name”, then press the ENTER button. Input Move Enter 3 Press the ▲ or ▼ button to select the Source List, then press the ENTER button. : : : : Enter 4 Set other signal sources (AV2, S-Video, Component) using the same method as listed above.
C I A L F E AT U R E S C hSaP Ep ter Four S P E C I A L F E AT U R E S Changing the Color Tone 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Picture”, then press the ENTER button. Picture Mode Custom Color tone Size ▼ More Move : Custom : Normal : Normal Enter Return 2 Press the ▲ or ▼ button to select “Color tone”, then press the ENTER button. Picture Mode Custom Color tone Size ▼ More Move : Custom : Normal : Normal Enter Press the EXIT button to exit.
S P E C I A L F E AT U R E S Changing the Screen Size Quick way to access the Screen size: Just press the P.SIZE button on the remote control. ▼ 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Picture”, then press the ENTER button. Picture Mode Custom Color tone Size ▼ More Move : Custom : Normal : Normal Enter Return 2 Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
S P E C I A L F E AT U R E S Digital Noise Reduction e: If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Picture”, then press the ENTER button.
S P E C I A L F E AT U R E S DNIe JrTM (Digital Natural Image engine) (CL29A10/CL34A10/CL29M6) Samsung’s New Technology enables an improved image with detail, contrast and white enhancement and 3D noise reduction. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Picture”, then press the ENTER button. Picture Mode Custom Color tone Size ▼ More Move : Custom : Normal : Normal Enter Return 2 Press the ▲ or ▼ button to select "DNIe Jr”, then press the ENTER button.
S P E C I A L F E AT U R E S Tilt Due to the Earth’s magnetic field there may be same minor image tilt depending on the TV’s location. When this occurs, follow the steps below. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Picture”, then press the ENTER button. Picture Mode Custom Color tone Size ▼ More Move : Custom : Normal : Normal Enter 2 Press the ▲ or ▼ button to select “Tilt”.
S P E C I A L F E AT U R E S Using the R.Surf Feature This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be watching a channel when commercials start. You can set the R.Surf to “5 minutes”, then switch channels. After minutes, the TV will return to the original channel. To use the R.Surf feature: 1 While you are watching the channel to which you want to return, press the R.SURF button. The on-screen display will read “Surf off”.
S P E C I A L F E AT U R E S Choosing a Multi-Channel Sound (MTS) Soundtrack Depending on the particular program being broadcast, you can listen to Stereo, Mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather.) Quick way to access the MTS: Just press the “MTS” button on the remote control. ▼ 1 Sound Press the MENU button to display the menu.
S P E C I A L F E AT U R E S Extra sound settings (Auto Volume, Turbo Sound or Pseudo Stereo) The following sound settings can be adjusted to suit your personal preferences • Auto Volume Each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is changed.
S P E C I A L F E AT U R E S LNA (Low Noise Amplifier) (CL29A10/CL34A10/CL29M6) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Channel”, then press the ENTER button.
S P E C I A L F E AT U R E S Setting the On/Off Timer Before using the timer, you must set the TV’s clock. (See “Setting the Clock” on page 30). ▼ 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Setup”, then press the ENTER button. Setup Time Plug & Play Caption Language ▼ More Move √ √ √ : English Enter 2 Press the ENTER button to select “Time”.
S P E C I A L F E AT U R E S To deactivate the “On time,” select “Off” during this step. ▼ 5 Press the √ button to select “On” or “Off”. Time Clock 09: 30am On Timer 06: 30am Off Timer - - : - - am Sleep Timer : Off On Timer Volume : 10 Press the ▲ or ▼ button to turn the on-timer “On”. (Repeatedly pressing the ▲ or ▲ or ▼ button will Move alternate between “On” and “Off”.) When finished, press the MENU button.
S P E C I A L F E AT U R E S Setting the Preferred Volume Level The preferred volume can be set for when the timer automatically turns on the TV. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Setup”, then press the ENTER button. Setup Time Plug & Play Caption Language ▼ More Move √ √ √ : English Enter 2 Press the ENTER button to select “Time”.
S P E C I A L F E AT U R E S Viewing Closed Captions Your TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign-language translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed captions as well.
S P E C I A L F E AT U R E S Viewing Picture-in-Picture (CL29A10/CL34A10/CL29M6) You can use the PIP feature to simultaneously to watch two video sources. Note:When PIP is selected in the Zoom mode, the Mode is automatically converted into the Normal mode. Activating Picture-in-Picture Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Picture”, then press the ENTER button.
S P E C I A L F E AT U R E S Selecting a Signal Source (External A/V) for PIP 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Picture”, then press the ENTER button. Picture Mode Custom Color tone Size ▼ More Move : Custom : Normal : Normal Enter 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
S P E C I A L F E AT U R E S Swapping the Contents of the PIP image and Main image Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Picture”, then press the ENTER button. Picture Mode Custom Color tone Size ▼ More Move : Custom : Normal : Normal Enter 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. : Off : On : 0 54 Return √ √ √ Enter 3 Press the EXIT button to exit.
S P E C I A L F E AT U R E S Changing the Position of the PIP Window 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Picture”, then press the ENTER button. Picture Mode Custom Color tone Size ▼ More Move : Custom : Normal : Normal Enter 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. Return Picture ▲ More Digital NR DNIe Jr Tilt PIP Move : Off : On : 0 √ √ √ Enter 3 Press the ▲ or ▼ to select the “Position”, then press the ENTER button.
S P E C I A L F E AT U R E S Changing the PIP Channel Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Picture”, then press the ENTER button. Picture Mode Custom Color tone Size ▼ More Move : Custom : Normal : Normal Enter 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. : Off : On : 0 Enter √ √ Return PIP PIP Source Swap Position Channel Move : On : TV √ : : Air 3 Adjust Press the EXIT button to exit.
S P E C I A L F E AT U R E S Changing the Size of the PIP Window l: n 1 Press the SIZE button under the cover of the remote control. Press the SIZE button repeatedly to cycle through this sequence: large window, small window.
S P E C I A L F E AT U R E S Viewing the Demonstration To become familiar with the various menus provided by your television, you can view the in built demonstration. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select the “Setup”, then press the ENTER button. Setup Time Plug & Play Caption Language ▼ More Move √ √ √ : English Enter 2 Press the ▲ or ▼ button to select “Demonstration”, then press the ENTER button.
S P E C I A L F E AT U R E S Customizing Your Remote Control Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a Set-Top Box, VCR, Cable box and DVD (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). • The remote control might not be compatible with all VCRs, DVD players and Cable boxes.
S P E C I A L F E AT U R E S Remote Control Codes VCR Codes 000 001 002 Samsung 018 003 004 005 Daewoo Daewoo, LG(Goldstar) 008 009 JC Penny RCA 061 Candle, Citizen, Portland Totevision 038 Magnavox, Marantz, Philco, 062 Canon, Curtis Mathes, Broksonic, Emerson 021 Craig, Fisher, Radio Shack, 039 Philips, Sylvania General Electric, JC Penny, JC Penny, JCL, Kenwood, Magnavox, Panasonic, Philco, Marantz, NEC, Tatung, Teac Radio Shack, Realistic, Sylvania Logik, Multitech, Shintom 0
P E C I AM FMEr OAT U R E S C hSa p tL Ee Five TROUBLESHOOTING If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center. Identifying Problems Problem Possible Solution Poor picture Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality. Try another channel. Adjust the antenna. No picture or sound. Try another channel. Press the TV/VIDEO button.
S P E C I AML EFMEOAT U R E S APPENDIX Cleaning and Maintaining Your TV With proper care, your TV unit will give you many years of service. Please follow these guidelines to get the maximum performance from your TV. Placement • Do not place the TV near extremely hot, cold, humid or dusty places. • Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleaners.
APPENDIX Specifications Model CL29A10 CL29M6/CL29M6MQU CL25M6MQU CL21S8MQU CL34A10 CL29K5MQU CL29M16MQU Voltage AC100-240 V AC100-240 V AC100-240 V AC100-240 V Frequency of Operation 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz Power Consumption 150 Watts 130 Watts 120 Watts 160 Watts 766 X 561 X 581/ 30.15 X 22.08 X 22.87 730 X 485 X575/ Dimensions 28.74 X 19.09 X 22.63 656 X 459 X 511/ 740 x 580 x 590/ 910 X 585 X690/ (mm/inches) 806 X 493 X598/ 25.83 X 18.07 X 20.12 29.13 x 22.83 x 23.23 35.83 X 23.03 X 27.