BF641 SERIES Built-in Oven user manual imagine the possibilities Thank you for purchasing this Samsung product. Please register your product at www.samsung.com/global/register BF641-Series_AND-00177D_EN.
Using This Manual EN Thank you for choosing a SAMSUNG Built - In Oven. This Owner’s Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this Owner’s Manual before using your oven and keep this book for future reference. The following symbols are used in the text of this Owner’s Manual.
Safety Instructions (Continued) Safety during operation ● This oven has been designed only for the cooking of household foods. ● During use, the oven interior surfaces become hot enough to cause burns. Do not touch heating elements or interior surfaces of the oven until they have had time to cool. ● Never store flammable materials in the oven. ● The oven surfaces become hot when the appliance is operated at a high temperature for an extended period of time.
Installation & Maintenance EN Safety instructions for the installation This oven may be installed only by an approved electrician. The installer is responsible for connecting the appliance to the mains and in so doing for observing the relevant safety regulations. ● Ensure protection from live parts when installing the oven. ● The kitchen cabinet in which the oven is built in must satisfy stability requirements as specified in DIN 68930.
Parts and Features Oven controls EN 2 1 4 1. Function Select Knob 2. Window Display ) 3 3. Temp Control Knob 4. Time Select Knob Front design The front panel is available in various material and color options including stainless steel, white, black and glass. For purposes of quality improvement, the appearance may be subject to change. Accessory BIG GRID The big grid should be used for grilling and roasting meals. You could use it with casseroles and other baking pots.
Settings EN Time setting If the oven is pluged to the power suply for the first time, its display will illuminate for short time and after 3 seconds 12:00 starts to blink. Before the oven can be used the time setting must be completed. 1 Press Time Select Knob, hour figures blink. 2 Turn Time Select Knob, set desired time in hours. 4 Turn Time Select Knob, set desired time in minutes. 5 Press Time Select Knob to confirm. 2 Press Time Select Knob to confirm.
Oven Use Using the Fast Preheating( ) mode EN If you use the FAST PREHEATING option, you can increase the temperature up to the set value in no time. This will drastically shorten your waiting time until the preheating is done. Use the FAST PREHEATING option to increase the temperature to the set value until the preheating is completed. Then switch to Cooking mode before proceeding. However, you do not need to use FAST PREHEATING for grilling food.
Oven Use (Continued) EN Test dishes According to standard EN 60350 1. Baking The recommendations for baking refer to preheated oven. Temp.
Cleaning and Care Hand Cleaning * EN Make sure the oven and accessory is cool before cleaning. Oven Interior ● For cleaning the interior of the oven, use a clean cloth and a mild cleaning agent or warm soapy water. ● Do not hand-clean the door seal. ● Do not use scouring pads or cleaning sponges. ● To remove stubborn soil, use a special oven cleaner. ● The cover casing should be cleaned using hot water, detergent and a soft nylon brush.
Cleaning and Care (continued) EN Door Glass Removal The oven door is equipped with three sheets of glass placed against each other. These sheets can be removed for cleaning. XU ZU 1 ) ) Remove the two screws on the left and right sides of the door. 2 Detach the covering and remove glass 1 from the door. 3 YU Lift glass 2 and remove the two holder glass rubber from the top of the sheet, then remove glass 3.
Warranty & Service FAQs and Troubleshooting EN What should I do if the oven doesn’t heat up? Check to see if one of the following actions resolves the issue: ● The oven may not be switched on. Switch the oven on. ● The clock may not be set. Set the clock (see section “Time Setting”). ● Check to see if the required settings have been applied. ● A household fuse may have blown or a circuit breaker may have tripped. Replace the fuses or reset the circuit.
Code No.: DG68-00177D BF641-Series_AND-00177D_EN.
