Owner's Manual

9. Verification will proceed. When download is done, the firmware
update process
will begin automatically.
8.
If you select Cancel during the download process, you are
prompted to confirm your selection in a message box.
If you want to cancel the download. select Yes and press the
ENTER button.
7.
The system update gets started.
•
If there is a disc in the player:
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the unit to perform the update.
• If the seNer seNice is not available:
" Update SeNer
is under maintenance. Please try again later."
6. To perform the system upgrade, press the .... ~ buttons to
select Start and then press the ENTER button.
10. When the installation is done, the player will automatically turn
off in 5 seconds.
All settings will revert to the factory settings the next time you
start the system and you will see the menu language selection
window.
(EJ " If you want to cancel the upgrade in the process of downloading the upgrade data, press the ENTER button.
You will see a confirmation message.
Selecting Yes will end the upgrade process, and selecting No will continue the upgrade process.
'" When the system upgrade is done, check the firmware details in the System Upgrade menu.
ji Do not turn off the player during the System Upgrade, as it may cause the player to not work properly.
,. You must use a USB Flash Drive to do software upgrades using the USB Host jack.
Other USB devices(ex. MP3 player) are not guaranteed to work.
,. There should be only one firmware upgrade file in USB flash drive for the player to properly perform an
upgrade.
,. Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected.
English _55