Owner's Manual
Table Of Contents
- Quick Setup Guide
- Owners Manual
- Player Update Information
- Pandora
- Warranty
systeOli1pgrad~e
_
Samsung
may
offer
upgrades
to
your
Blu-ray
Disc
Player's
firmware
in
the
future.
To
upgrade
this
firmware
you
must:
1.
Go
to samsung.com
and
refer
to
the
'SUPPORT
page
to
download
the
latest
firmware.
You
can
use
a
CD-R
or
a
USB
flash
drive
to
perform
the
firmware
upgrade.
For
more
information,
see
"Upgrade
Manual"
at
the
website
mentioned
above.
or
2.
Connect
the
network
(see
pages
29-30)
and
follow
the
steps
below.
FIRMWARE UPGRADE
1.
With
the
unit
in
Stop
mode/No
Disc
mode,
press
the
MENU
button.
2.
Press
the
& T buttons to
select
Setup,
then
press
the
ENTER
or
~
button.
3.
Press
the
& T buttons to
select
System
Setup,
then
press
the
ENTER
or
~
button.
4.
Press
the
& T buttons to
select
System
Update,
then
press
the
ENTER
or
~
button.
5.
The
player
will
check
the
cable
or
network connection status
automatically.
The
connection
checking
window
will
be
displayed
.
•
If
the
upgrade
is
possible:
You
will
see
information
on
the
current
and
new
versions
of
firmware
in
a
message
box
.
•
If
the
upgrade
is
not
possible:
You
will
see
the
following
description
in
the
message
box.
•
If
the
cable
is
not
connected :
"Ethernet
cable
is
not connected.
Please,
check
the
Ethernet
cable"
•
If
the
network connection
has
failed
:
"This
system
can
not
connect to
internet
for
update.
Please,
check
the
network setup"
•
If
no
latest
version
is
released
(the
latest
version
has
been
already
installed)
:
"The
latest
version
of
the
firmware
is
already
installed.
There
is
no
need
to
update."
54
system upgrade