Owner's Manual

dlspJay setup _
SETTING UP THE DISPLAY OPTIONS
Press the RETURN or .... button to return to the previous
menu. Press the MENU button to exit the menu.
This function allows you to setup the TV screen settings. This function
depends on the disc or
TV type. It may not work with some discs or TVs.
1. With the unit in Stop mode, press the MENU button.
2. Press the'" "T buttons to select Setup, then press the
ENTER or ~ button.
3. Press the'" "T buttons to select Display Setup, then
press the
ENTER or ~ button.
Video setup menu
will be displayed.
4. Press the'" "T buttons to select the desired display option
from the options on the following pages.
5. Press the ... "T buttons to select the desired sub-menu
item from a video display option, then press the
ENTER
button.
6. Each video option is described in detail below.
TV Aspect
• 16:9 Normal :
Certain movies(4:3 source) will be displayed in 4:3 Pillarbox (black bars on sides of picture)
if 16:9 normal is selected.
Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box:
Select when you want to see the total
16:9 ratio screen Blu-ray Disc/DVD
supplies, even though you have a 1V with
a 4:3 ratio screen. Black bars will appear
at the top and bottom of the screen.
• 4:3 Pan-Scan:
Select when you want to see the 169
video supplied by the Blu-ray Disc/DVD
without the black bars on top and bottom,
even though you have a 1V with a 4:3
ratio screen(extreme left and right portion
of the movie picture will be cut off).
• 16:9 Wide:
You can view the full 16:9 picture on your widescreen 1V.
(E1 1II Depending on the disc type, some aspect ratios may not be available.
If you select an aspect ratio which is different than the aspect ratio of your TV screen, then the picture might
appear to be distorted.
English _39